How to Make Tattoo Flash on Procreate
StyleFrame Team8 min read
To make tattoo flash in Procreate, create a 300 DPI canvas (3300 × 4200 px for an 11×14 in sheet), sketch each design on its own layer, ink it with a bold monoline-style brush, and fill with flat color on separate layers. Then arrange the designs on one sheet, add a paper texture with a blend mode, and export a flattened PNG or PDF. Keep linework, color, and shading on separate layers so any single design can be edited, recolored, or turned into a stencil later.
This guide covers that workflow, then shows how to take finished flash into a motion pipeline when you need it animated.
What makes flash different from regular illustration
Flash is a set of ready-to-tattoo designs presented together. The look comes from constraints: bold outlines, limited palettes, simple shading, and shapes that stay readable when small and sitting on skin. Procreate handles the drawing well, but the design logic is what makes it flash. Think about line weight and spacing before you think about rendering.
If you're coming from After Effects or Cinema 4D, treat it like building a motion graphics toolkit. You're making modular, reusable assets with consistent rules, not a single painting.
Step 1: Set up the canvas
Start with a canvas sized for the final use:
- Print sheet (11×14 in): 3300 × 4200 px at 300 DPI
- Screen-only sheet: 2400 × 3000 px at 300 DPI, which leaves more layers available
- Square social post: 3000 × 3000 px
- Vertical story format: 2700 × 4800 px
Choose sRGB if the sheet will live on screens, or CMYK if you're sending it to a printer. Procreate's layer limit depends on canvas size and iPad model, so a large canvas with many designs can run out of layers quickly. If you plan a dense sheet, consider drawing individual designs on smaller canvases and assembling them later.
Use a white or off-white background on its own layer so you can hide it for transparent exports.
Step 2: Choose brushes that read as flash
Flash linework should look decisive. You don't need a huge brush library to get there:
- Linework: A monoline or technical-pen style brush gives consistent, bold lines. A size of roughly 10–20 px on a 300 DPI canvas is a reasonable starting range, scaled to the design.
- Character: A dry-ink or studio-pen style brush adds slight weight variation and texture while keeping edges crisp.
- Smoothing: Turn on StreamLine at about 40–60% so curves stay confident.
- Shading: Keep it deliberate. A soft airbrush works for gradients on color pieces, and a noise or grain brush adds texture without muddying the lines. Traditional-style flash often uses little to no shading.
Many tattoo artists buy specialty brush and stamp sets for flash, such as American traditional, neo-traditional, banner, or floral packs. They're optional. Stock brushes can produce clean flash, and custom sets mainly speed up common motifs.
Step 3: Sketch loosely, then ink
Draw each design on its own layer group. A solid sequence:
- Rough sketch in a light color (many artists use red) at reduced opacity.
- Clean linework on a new layer above, tracing your own sketch.
- Cleanup with the eraser to remove stray overlaps and fix tangents.
Don't chase perfect lines. A little irregularity keeps the sheet from looking mechanical, and tattooers often prefer linework with some hand-drawn character.
If you're learning a style, study and trace historical flash for shape logic, then draw your own versions. Tracing old sheets teaches where the key elements sit within a design and why certain shapes survive tattooing. Don't publish traced work as your own. Use it to learn, then redraw.
Step 4: Keep linework protected with layer structure
The most useful Procreate habit for flash is separating line from everything else:
- Linework layer: Set it as a Reference layer. Nothing else goes on it.
- Color layer: Place it below the lines. Use the Selection tool in Automatic mode and tap the area to fill, then fill on the color layer.
- Shading layer: Add it above or below color, depending on how you want it to interact with the lines.
Automatic selection uses a threshold you can adjust by holding after you tap and dragging left or right. A higher threshold selects more of the area and bleeds slightly under the lines, which avoids white gaps. Test it on a small shape first, because the right value depends on how tight your lines are.
Because color and shading sit on their own layers, you can recolor an entire design, hide shading for a stencil version, or export line-only art without redrawing anything.
Step 5: Fill color and add shading
Traditional flash tends to use a restricted palette and flat fills. A few practical points:
- Build a Palette in Procreate for the whole sheet so every design shares the same colors. This is what makes a collection look cohesive.
- Use flat fills first. Add shading only after the color blocks are done.
- For stipple or dotted shading, use a texture or stipple brush on a dedicated layer, clipped to the color layer so it can't spill outside the shape.
- For stencil-ready versions, hide color and keep only clean linework with any necessary shading marks.
Step 6: Compose the sheet
Once the designs are done, assemble them:
- Duplicate the finished groups into a master canvas, or keep everything in one file if the layer count allows.
- Vary the size and orientation of the designs, but keep consistent spacing.
- Group by theme, such as animals, daggers, florals, or lettering. Balance visual weight so one corner isn't heavier than the rest.
- Add filler elements, such as small stars, dots, or sparkles, to tie the layout together. Keep these on their own layer.
If you offer a build-your-own system, such as a skull with swappable accessories, you can use a locked reference group of elements. Duplicate the pieces you need and drag them out of the group to unlock them. Then assemble and erase overlapping lines to produce a stencil-ready combination. This keeps the master file clean and non-destructive.
Step 7: Add paper texture for an authentic finish
A flat digital sheet can look sterile. To give it a printed or hand-painted feel, stack paper textures above your artwork:
- Add paper texture layers above your art, such as a base, a sheen, and a shadow.
- Set their blend modes to Multiply, Screen, or Linear Burn, depending on the texture. Each one imprints the texture differently, so test them.
- Lower opacity until the texture is visible but doesn't overwhelm line quality.
- Keep texture layers separate from artwork so you can export a clean version without them.
Step 8: Export the right files
Export more than one version:
- Flattened PNG for sharing online.
- PDF or high-resolution PNG for printing.
- Transparent PNG for each individual design (hide the background and paper layers first).
- Line-only versions for stencils.
- Procreate file as your editable master.
Name files consistently, because you'll thank yourself when a client asks for one design from a sheet six months later.
Taking flash into a motion pipeline
If you're a motion designer, animator, or editor, a flash sheet can become source material for much more than a poster: title cards, lower thirds, music video graphics, product spots, or looping social content. The transparent PNG exports from Step 8 are the starting point, and the ideal handoff is one clean file per design.
Procreate stays the place where you draw. After that, a few approaches work well:
- Classic After Effects workflow. Import individual PNGs, then animate with shape layers, puppet tools, or manual frame-by-frame cycles. This gives the most control over rhythm and timing for simple motion such as a dagger sliding in or a rose unfolding.
- Frame-by-frame in Procreate. Procreate has animation tools for short loops, which is useful for boil effects or hand-drawn wiggle. Export frames as an image sequence for compositing.
- Generative tools for in-betweens and style work. Tools like , an AI video and motion tool, can help here. Your references and keyframes drive the results.
As with any generative tool, results depend on your references and keyframes. Expect to iterate, and keep hand-finishing in your compositor for details that need exact control, such as line weight consistency or brand colors.
Common mistakes to avoid
- Drawing too small on a low-resolution canvas. Fine details blur when you print or scale.
- Shading on the linework layer. This breaks stencil exports and makes edits painful.
- Overusing texture. Heavy grain hides the clean lines that make flash readable.
- Inconsistent line weights across designs. Pick a standard brush size range per sheet.
- Skipping the palette. A sheet with unrelated colors looks like a pile of separate drawings.
- Merging everything too early. Keep layers until a design is final and archived.
Quick checklist
- Create a 3300 × 4200 px, 300 DPI canvas.
- Sketch each design on its own layer.
- Ink with a bold, consistent brush and StreamLine on.
- Set linework as Reference and color on separate layers.
- Build a shared palette and fill flat color first.
- Add shading sparingly and clip it to the color.
- Arrange the designs into themed groups.
- Add paper texture with a blend mode.
- Export the flattened sheet, individual transparent PNGs, and a line-only version.
- If you need motion, bring the PNGs into After Effects or a generative tool like Styleframe.
Procreate gives you everything you need for the drawing itself. The craft is in layer discipline, consistent line weight, and designs that still read when they're small, and that same discipline makes the artwork easy to animate later.