How to Make Stickers with Procreate and a Printer
StyleFrame Team8 min read
To make stickers with Procreate and a printer, draw each design on its own layer at 300 ppi, add a white outline layer underneath as a cutline, arrange the designs on a sheet sized to your paper, and export it as a PNG or PDF. Print it at actual size on inkjet sticker paper, then cut the stickers out by hand, with a cutting machine such as a Cricut, or by sending the file to a print shop. The steps below also cover canvas sizes, outline techniques, and print settings.
What you need
- Procreate on an iPad, with an Apple Pencil or similar stylus.
- An inkjet printer. Some home printers print sticker paper from RGB files without trouble. One Procreate sticker maker reports printing from RGB at home with no need to convert to CMYK, but check how your own printer handles it.
- Printable sticker paper rated for inkjet. Matte, glossy, and vinyl-style options exist, and the finish changes how saturated colors look.
- A cutting method: scissors, a craft cutter with print-then-cut support, or a professional printer if you want die-cut or kiss-cut results at volume.
Know the difference between the two cut types before you design. A kiss cut slices only the sticker layer and leaves the backing intact, which is how most sticker sheets work. A die cut goes through both layers and leaves a standalone shape.
Step 1: Set up your Procreate canvas
Canvas size decides how much trouble you have later. Start from the physical size you want to print, not from a random square.
- Resolution: use 300 ppi. Lower values look soft once printed.
- Full-page sheet: a US Letter canvas (8.5 × 11 in) works if you want to design a whole page at once.
- Half-page sheets: a 4.5 × 6 in canvas (1350 × 1800 px at 300 ppi) lets you fit two sheets on one Letter page, which is handy for product-style sticker sheets.
- Cutting machine limits: if you plan to use a Cricut, check its print-then-cut maximum before you build the canvas. Its design software caps the printable area, and a 9 × 7 in canvas is one size artists use to stay inside that limit. Designing close to final size avoids rescaling and blurring.
- Color profile: one sticker artist leaves Procreate in RGB (set to Display P3) and prints at home without converting. Convert to CMYK if a print shop requests it.
Procreate has no rulers, so turn on the Drawing Guide in the Canvas settings and set the grid to one inch. That gives you a physical reference while you draw. A common trick is to draw a one- or two-inch box on its own layer, lower its opacity, and reuse it to check sticker proportions.
Step 2: Draw each sticker on its own layer
Treat each sticker as a separate asset, the same way you would organize a compositing project.
- Draw each design on its own layer, or its own small group of layers.
- Use a separate canvas for the individual designs if the sheet will be cluttered. You can copy all the layers into the sheet canvas later by selecting them, then dragging them across through the Gallery.
- Before you flatten anything, duplicate the document. Keep one editable master with all the layers.
- In the copy, merge the layers for each sticker so every sticker is a single raster layer. Outlines are easier to generate from flattened art.
Keep stickers a readable size. Typical stickers run from roughly 2.5 to 5 inches, and fine linework that looks sharp on the iPad can disappear at 2 inches on vinyl or paper.
Step 3: Add outlines and cutlines
The outline is the white border around the artwork. It also acts as the cutline, giving you a forgiving margin when cutting by hand or on a machine. There are two reliable ways to build it.
Option A: Trace with a monoline brush
- Create a new layer below your sticker layer.
- Pick a monoline-style brush, such as the one in the Calligraphy set.
- Choose white (or your border color) and draw around the design.
- Fill the enclosed shape with the same color.
This is quick and gives you smooth, deliberate shapes. Raising the brush's stabilization settings makes the outline cleaner. It's best for simple designs.
Option B: Use Gaussian Blur to grow the edge
This suits complex or irregular silhouettes where tracing would take too long.
- Duplicate the sticker layer.
- Turn on Alpha Lock for the lower copy, then fill it with your border color using Fill Layer.
- Turn Alpha Lock off.
- Apply Gaussian Blur to that layer and drag until the blur extends as far as you want the border.
- Use the Selection tool in Automatic mode with Color Fill to tap and fill the blurred area with solid color.
The result is a border that follows the shape of the art. Check for pinholes or stray soft edges, since those show up when printed.
If you want full-bleed stickers with no white border, extend the art past the intended trim line and cut inside it. That leaves margin for cutting error.
Step 4: Build the sticker sheet
Arrange your flattened stickers and their outlines on the sheet.
- Keep consistent gaps between stickers. If you're using a cutting machine, leave enough room for a cutline around each shape. For hand cutting, leave extra room for scissors.
- Group each sticker and its outline so you can move them as a unit.
- Keep everything inside a safe margin. Some home printers can't print to the paper edge and may crop or shift artwork that's too close.
- Add branding if you plan to sell the sheets: a logo, a title, and a SKU in the header or footer help with inventory and consistency.
- Hide all background layers and decorative paper textures unless they're intentional. A transparent background prints as white on white paper, but colored fills print as ink.
Before exporting, turn off the layers you don't want printed, such as guide boxes and reference grids.
Step 5: Export and print
- Export as PNG or PDF. PNG preserves transparency and is common for sticker sheets. PDF is convenient when you want the print dialog to respect the page size exactly.
- Print a test on plain paper first. Compare it to the iPad screen for color shifts and check that the margins fit.
- Set the print dialog correctly. Choose the paper type that matches your sticker stock, set quality to high, and print at 100% or "actual size" rather than "fit to page." Scaling is a common reason cutlines drift.
- Let ink dry. Inkjet ink on sticker paper takes a few minutes to set, and handling it early causes smears. Some artists add a clear laminate or sealant sheet for durability, especially for water bottles or outdoor use.
If colors look duller on paper than on screen, expect it. A backlit display is brighter than reflected light. Slightly boosting contrast and saturation in a copy of the file before final printing can compensate, but test on a single sheet before committing the whole stack.
Step 6: Cut your stickers
By hand
Cut along the outline with sharp scissors. Rounded shapes and generous white borders are much easier to cut cleanly than thin points. Rounded corners also stop edges from catching and peeling.
With a cutting machine
Print-then-cut machines read registration marks on your printed sheet and cut along the shapes you've defined in their software. Upload the PNG, make sure the cut path follows your outline, and confirm that the design is sized at the printed dimensions. Cut a sample first to tune pressure and blade depth, and decide whether you want a kiss cut (sticker only) or a cut that runs through the backing.
By ordering
If you want volume or a die-cut finish, upload the same artwork to a professional sticker printer. Some add the cutline for you, though checking the proof is wise. Common materials include paper, white or clear vinyl, and holographic or glitter stock, with matte, gloss, or laminate finishes.
Common problems and fixes
- Blurry print: the canvas was too small or low in resolution. Rebuild at 300 ppi at final size.
- Cuts land off the outline: the printer scaled the page. Print at actual size and recalibrate registration.
- Colors look different: do a test print, check the paper's finish, and adjust a copy of the file rather than the master.
- White edge slivers: the outline is too tight. Add a few more pixels of border.
- Ink smears: let prints dry, and consider a protective laminate.
Quick checklist
- Canvas at final physical size, 300 ppi, RGB.
- One layer per sticker, with a master copy kept editable.
- White outline layer beneath each design.
- Consistent spacing and safe margins on the sheet.
- Test print on plain paper, then print on sticker stock at actual size.
- Cut by hand, with a cutting machine, or order professionally.
Once the first sheet is dialed in, the same canvas template works for every future set, so save it as a reusable starting point.