How to Make Sticker Background Procreate
StyleFrame Team7 min read
Procreate has no built-in sticker border tool, so you build the background yourself. Duplicate your artwork onto a layer beneath the original, fill it solid white, blur it with Gaussian Blur, then use Automatic selection to turn the blurred edge into a hard-edged shape and fill it. Hide the canvas background and export a transparent PNG so the white border becomes the sticker's die-cut backing.
What "Sticker Background" Means in Procreate
Most people searching this want the white die-cut border that sits behind an illustration and makes it read as a physical sticker. Some mean the backing shape for a cutting machine, and others mean a transparent background so the sticker can sit on any layout. All three are the same job: a clean, solid shape slightly larger than your artwork, on its own layer, with transparency around it.
Everything below assumes your artwork is on a single layer. If it isn't, merge it first, ideally on a duplicate of the project so your editable layers stay intact.
Method 1: Blur and Select (Most Controllable)
This is the common approach, and it gives you direct control over border thickness.
Step 1: Prepare the artwork
- Hide the canvas background color so only your design is visible.
- Merge all artwork layers into one. If the sticker is a sheet of multiple designs, a single merged layer lets you outline them all at once.
- Duplicate that layer. You now have two identical layers.
Step 2: Turn the bottom layer solid white
- Select the lower copy.
- Turn on Alpha Lock (two-finger swipe right on the layer).
- Pick white, tap the layer, and choose Fill Layer.
- Turn Alpha Lock off.
The bottom layer is now a flat white silhouette of your artwork. Alpha Lock matters here: it restricts the fill to existing pixels, so you don't flood the whole canvas.
Step 3: Blur the silhouette outward
Open Adjustments (the magic wand icon) and choose Gaussian Blur. Drag your pencil right on the canvas to increase the amount. The white shape should spread beyond the art on all sides and fully cover it. Values around 10% to 25% tend to work, but it depends on canvas size and resolution. This slider is also your thickness control, so if the border looks wrong at the end, come back here.
Step 4: Convert the soft edge into a hard shape
- Open the Selection tool and set it to Automatic.
- Tap the blurred layer, then without lifting, drag left or right to change the selection threshold. Lower values hug tighter; higher values expand.
- Tap Invert so the selected area is the shape you want, not the empty area outside it.
- Tap the layer and choose Fill Layer with white.
Setting the fill color to white before inverting can save you a step, since the fill applies as part of the selection workflow. Check for pinholes or gaps afterward and patch them with a hard brush in the same white.
Method 2: Faster Batch Approach with Threshold
If you have a full sticker sheet and don't want to tune each design, there's a quicker method that works well on many designs.
- On the duplicated bottom layer, use Hue, Saturation, Brightness and push brightness to maximum so the layer goes white.
- Apply a Gaussian Blur to expand the shape.
- Adjust the threshold (where available in your Procreate version) so the soft blur snaps to a hard edge.
It's fast but less predictable. The border follows whatever edge your artwork has, so soft, low-opacity, or textured brush edges can produce uneven results. Hard-edged art gives cleaner output than airbrushed art. A sensible workflow is to use this method for speed and then clean up the worst offenders by hand.
Smoothing the Border for Print and Cutting
Both methods leave a slightly bumpy edge when you zoom in. For screen use that's usually invisible. For a cutting machine it can cause jittery cut paths.
- Pick a smooth monoline brush (the Monoline brush in the default Calligraphy set works).
- Use the same color as the border.
- Trace the outer edge slowly, rounding off bumps and filling notches.
- Zoom in while you do it and let stabilization do some of the work.
Keep the border consistent. Sticker printers generally prefer an even offset around the artwork, and tight inner concave corners can be hard to cut cleanly, so rounding them off helps.
Making the Background Transparent and Exporting
A sticker background that isn't truly transparent will show as a white or colored rectangle when placed in another layout. Before exporting:
- Hide the canvas background color layer.
- Check the layer stack: artwork on top, white border below, nothing else visible.
- Export as PNG (not JPEG) so alpha is preserved.
Some people also add a thin drop shadow or a faint gray inner edge on a separate layer to preview the sticker effect, then hide it for the production file. If you're making a "faux sticker" look for social posts or mockups, keep highlights, shadow, and gloss on layers above the artwork, and export a flat transparent version separately for printing or cutting.
Quick Troubleshooting
- Border has holes: The blur was too low for the artwork's gaps. Increase Gaussian Blur or fill gaps manually.
- Border is too thick or too loose: Reduce blur, or lower the selection threshold.
- Border bleeds into the artwork's interior: Make sure the white layer is below the artwork layer, not above it.
- Rough or pixelated edge: Work at higher canvas resolution; blur values behave differently at different sizes.
- Fill floods the whole canvas: Alpha Lock wasn't on during the first fill, or you filled without a selection.
Taking Procreate Stickers into Motion
If you're a motion designer, the sticker is often only the starting asset. Animated sticker packs, social overlays, lower thirds, and stop-motion-style collage elements all start with a clean transparent PNG exported from Procreate. In After Effects the same logic applies, with more control:
- Import the PNG and animate transform properties, or split elements into layers first for secondary motion.
- To regenerate or adjust a border procedurally, use a Stroke layer style, Simple Choker, or a Shape layer with Offset Paths driven from the layer's alpha. This keeps the border editable instead of baked in.
- A slight wobble or boil on the border with Turbulent Displace can give a handmade die-cut feel.
- Precomp the finished sticker so you can reuse it with different animation presets.
Baking the border in Procreate is good for print and static delivery. Building it in After Effects is better when thickness, color, or animation might change later.
Where Styleframe Fits in a Sticker Workflow
Procreate handles the hand-drawn part. Styleframe (styleframe.ai) is useful when your sticker source isn't a clean drawing, or when you want to extend the look into motion without abandoning your compositing pipeline.
Styleframe is an AI video and motion tool built around artistic control rather than one-click output. Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive.
A few tools map directly onto sticker work:
- Remove Background produces a clean cutout from footage or generated frames, so you have an isolated subject to build a sticker border around, in Procreate or After Effects.
- Restyle and Ink-and-Paint use reference-driven style transfer, so you can push live-action or 3D-looking frames toward your illustrated sticker style using your own reference art.
- Frames-to-Video is keyframe-driven, so you can define start and end poses for a sticker character and generate the in-between motion, then composite it with your own border treatment.
- 2D-to-3D and Turntable can turn a flat illustration into a rotating view, useful for peel or spin-style sticker animations.
- 4K Upscale gets output to production resolution.
Styleframe exports image sequences, so the results drop into After Effects or Nuke like any other plate. Your pipeline stays the same: generate or refine in Styleframe, finish the border and animation in your compositor.
None of this replaces the Procreate steps for a static sticker. It matters when you need the sticker look applied across moving frames or built from video sources.
Final Checklist
- Artwork merged to one layer
- Duplicate layer filled white with Alpha Lock
- Gaussian Blur applied to expand the shape
- Automatic selection, threshold tuned, inverted, and filled
- Gaps patched and edges smoothed with a monoline brush
- Canvas background hidden and exported as transparent PNG
- For animation, decide whether to keep the border baked in or rebuild it in After Effects
The blur amount is the one setting you'll tweak most.