How to Make Speech Bubbles in Procreate
StyleFrame Team8 min read
Procreate has no dedicated speech bubble tool, so you build bubbles from basic shapes. Draw an ellipse with QuickShape or the Ellipse selection, fill it with white, add a tail with a second shape or the Freehand selection, then type the dialogue with the Text tool on its own layer. If you need many bubbles, save one as a custom stamp brush or import a ready-made balloon brush set. Export as a transparent PNG or a layered PSD to animate in After Effects.
Does Procreate Have a Speech Bubble Tool?
No. Procreate was built as a painting app, and comic-specific features like balloons and panel tools are long-standing requests from its community. Many comic artists end up lettering in Clip Studio Paint or a desktop app and bringing the results back, while others stay inside Procreate with a handful of workarounds.
Those workarounds are reliable once you set them up. For motion designers and animators, they're usually enough: you rarely need a full comic-lettering suite, just clean bubble art on a transparent background that you can animate in After Effects.
Method 1: Draw a Bubble with QuickShape and Color Drop
This is the fastest route for a one-off bubble.
- Create a new layer and name it "Bubble Line."
- Pick a clean outline brush, such as a Monoline brush, or any brush with consistent width.
- Draw a rough oval and hold your Pencil or finger at the end of the stroke. Procreate snaps it into a perfect ellipse.
- Tap Edit Shape at the top of the canvas if you need to correct it. You can choose Ellipse, and drag the nodes to resize or rotate it.
- Add a new layer beneath the line layer, name it "Bubble Fill," and set your color to white.
- Drag the color swatch from the top-right of the screen into the closed shape. Color Drop fills it.
If the fill leaks or leaves a thin halo at the edge, raise the Color Drop threshold by continuing to hold your pen after dropping the color and sliding left or right. A slightly higher threshold fills right up to the line's anti-aliased edge.
Keeping the line and fill on separate layers pays off later. You can recolor the fill, swap the outline weight, or animate them independently.
Method 2: Build a Bubble with the Selection Tool
If you want geometric precision or a specific aspect ratio, the selection tools are more controllable than freehand drawing.
- Tap the Selection tool (the S icon) and choose Ellipse.
- Drag out an oval. Use the two-finger gesture or the corner handles to adjust proportions. Turn on Uniform in the bottom toolbar if you need a perfect circle.
- Tap Color Fill or drag a color into the selection on a new layer.
- For an outline, select a brush, set its color to black, and stroke along the selection edge on a layer above. Alternatively, duplicate the filled layer, fill it black, and nudge the white layer on top slightly smaller using the Transform tool. This gives a clean, consistent border.
The Rectangle selection works for caption boxes and narration panels. The Freehand selection is useful for irregular shouting bubbles. Tap points to define a jagged outline, close the shape, then fill.
Adding the Tail
The tail is where most Procreate bubbles look amateur, usually because it sits as a separate triangle with visible seams. A cleaner approach:
- On the same fill layer, switch to the Selection tool and choose Freehand (or Polygon-style tapping for straight edges).
- Tap three points to make a triangle that starts inside the bubble and extends toward the speaker. Overlapping the body hides the join.
- Fill the selection with white on the same layer as the bubble fill, so body and tail become one shape.
- On the line layer, draw the two outer edges of the tail with your outline brush. Then use the eraser with the same brush to remove the outline segment where the tail meets the bubble body.
For curved or tapered tails, draw them with the brush and fill them with Color Drop instead. Point the tail toward the speaker's mouth, not their head, and keep it short enough that it doesn't cross other bubbles.
Adding the Text
Use Procreate's built-in text:
- Open Actions → Add → Add Text.
- Type the dialogue, then tap Edit Style to choose font, size, kerning, tracking, and alignment. You can import your own fonts through the font manager.
- Center the text and drag it so it sits within the bubble with even padding.
Keep a few practical rules in mind:
- Leave generous padding. Text that nearly touches the outline looks cramped and becomes unreadable once the bubble scales in motion.
- Use center alignment for most dialogue, and tighten leading slightly.
- Keep text on its own layer so you can revise copy without redrawing the bubble.
- Avoid auto-rasterizing the text until the wording is approved.
If your bubble will be animated, consider leaving the lettering out of Procreate entirely and setting type in After Effects, where it stays editable and resolution-independent. In that case, deliver bubble shapes only.
Method 3: Use Stamp Brushes and Bubble Packs
If you're lettering a lot of dialogue, drawing every bubble gets tedious. There are two efficient options.
Import a balloon brush set
Several creators sell or share comic brush sets with ready-made balloon shapes, tail brushes, and panel borders. Community members often point to dual-brush setups that use blending modes to handle line and fill in a single stroke. Some sets also let you draw an ellipse with QuickShape using a tail brush, then fill it with the same brush, so you can draw bubbles rather than just stamp them. Check the license terms before using brush packs in commercial work.
Make your own stamp
- Draw a clean bubble in black on a transparent layer, at a high resolution canvas.
- Open the Brush Library, tap +, and go to the Shape source. Choose Edit, then Import to bring in your bubble as a shape source.
- Under Stroke Path, set Spacing to maximum so each tap stamps once.
- Under Apple Pencil and Dynamics, turn off pressure-based size changes if you want consistent output.
- Save the brush and stamp it with a single tap.
Build a small set: oval, wide oval, rectangle caption, jagged shout, cloud thought bubble, and a few tails at different angles. Stamps are not great for fill-and-outline adjustments, so keep them for fast layouts and storyboards, then redraw hero bubbles by hand.
Bubble Styles Worth Building
A small library covers most dialogue:
- Standard speech: Smooth ellipse, solid outline, tail toward the speaker.
- Shout: Jagged or starburst outline, thicker line, larger bold text.
- Whisper: Dashed or thinner outline, smaller text, sometimes lighter fill.
- Thought: Cloud-like scalloped edge, with a trail of small circles instead of a tail.
- Narration box: Rectangle with no tail, often tinted.
Make the dashed whisper outline using a brush with spacing turned up, or by drawing the outline with a dotted brush over a selection edge.
Organizing Bubbles for Production
Treat each bubble as a reusable asset:
- Put line, fill, and text in a group named after the line of dialogue.
- Name layers clearly, since names carry through to PSD export.
- Keep bubbles on a separate group from the artwork so you can toggle them on and off.
- Use a consistent line weight across the whole project. Inconsistent outlines are the most obvious tell in finished work.
- Work at a canvas size large enough for your final delivery resolution, so bubbles stay sharp when scaled up in a 4K comp.
Exporting Speech Bubbles for After Effects
If your bubbles are headed for motion work, export carefully:
- Transparent PNG: Hide the background color layer, then use Actions → Share → PNG. Export bubbles on their own to get alpha channels you can drop into a comp.
- Layered PSD: Export as PSD to preserve layer structure. After Effects can import a PSD as a composition, which gives you separate line, fill, and artwork layers to animate.
- Naming: Name layers before exporting. "Bubble_01_Fill" is easier to find than "Layer 14."
Once in After Effects, a few simple moves give bubbles life: scale up from the tail tip by moving the anchor point there, add a slight overshoot with keyframe easing, and use a Wiggle expression on position for shouting bubbles. Because you separated line and fill, you can also animate a Trim Paths-style reveal in a shape layer recreated from your design, or simply mask the line layer.
Where Styleframe Fits in the Workflow
Styleframe doesn't draw speech bubbles, and it isn't a replacement for lettering in Procreate. It's useful for the surrounding frames: the artwork those bubbles sit on.
Whatever you use to create that surrounding artwork, you can bring the results into After Effects, layer your Procreate bubbles on top, and keep compositing where you already do it.
Common Mistakes to Avoid
- Drawing bubbles freehand every time. Use QuickShape or selections to get clean ellipses.
- Merging line and fill too early. You'll lose the ability to recolor or restyle.
- Overlapping bubbles over faces or key action. Leave space in your composition for dialogue before you draw it.
- Tiny text. Check readability at final output size, not only on the iPad.
- Inconsistent tails. Pick one tail style per project and stay with it.
Quick Recap
Procreate won't hand you a speech bubble button, but a repeatable setup gets close. Use QuickShape or the Ellipse selection to make the body, merge the tail into the fill layer, keep outline, fill, and text on separate layers, and save a stamp library for speed. Export a transparent PNG or layered PSD, and animate in After Effects, where the bubbles can pop, wobble, and time to your edit.