How to Make Something Look Metallic in Procreate
StyleFrame Team8 min read
To make something look metallic in Procreate, draw it with high contrast and sharp light-to-dark transitions, then add crisp specular highlights. A reliable workflow is to shade in grayscale, then colorize with a Gradient Map to get gold, silver, copper, or brass. Metal reads as metal because of how light and dark values alternate across the surface, so color matters less than value structure.
Why Metal Is a Value Problem, Not a Color Problem
A flat gold fill looks like yellow paint. A gold surface in a render or illustration is a sequence of light and dark bands that mimic reflections of the environment. Matte surfaces diffuse light gradually. Polished metal reflects its surroundings, so the shading jumps between bright and dark over short distances.
Keep that in mind and the rest follows. Every technique below does one of three things:
- raises contrast
- creates alternating reflection bands
- adds a few small, intense highlights
If you work in After Effects or Cinema 4D, think of this as building a reflection map by hand. You choose what the surface "sees" and paint it directly.
Step 1: Block the Shape and Decide on a Light Source
Start with each object as a flat, single-color shape on its own layer. Pick a light direction before you paint anything, such as upper right, and stick to it. Basic form shading (a lit side, a shadow side, a cast shadow) gives you volume, but at this stage it will still look like plastic or clay.
Work in grayscale at this point. Removing hue lets you judge value relationships without being distracted by the color, and it sets you up for the Gradient Map step later.
Use Alpha Lock or a clipping mask on a layer above the base shape so your shading stays inside the silhouette. This also keeps the work non-destructive: you can repaint the shading without redrawing edges.
Step 2: Build the Light–Dark–Light Banding
This is the step that changes how the object reads.
Increase contrast first
Push your darkest values darker and your lightest values lighter than feels natural. Metal needs a wider value range than most other materials. You can use Curves under Adjustments to widen the range quickly, but painting it in gives you more control.
Create alternating bands
Instead of a single smooth gradient from light to dark, paint a pattern: light, mid, dark, mid, light. On a cylinder, such as a pipe or a ring, those bands run along the length of the form. On a sphere, they curve around it. The sequence suggests that the surface is reflecting a bright sky, a dark horizon, and a bright ground bounce.
Mix soft and hard transitions
Blend some transitions smoothly, especially on the side facing away from the light, and leave others abrupt. A hard edge between a bright band and a dark band is what sells polish. The shinier the material, the more abrupt and numerous these transitions should be. For a duller metal like brushed aluminum or pewter, soften the edges and reduce the number of bands.
Add specular highlights last
Specular highlights are the small, near-white, crisp marks where the light source reflects directly. Place them on the edge or curve facing the light. Keep them sharp and few. A dot on a sphere, a thin line along a bevel, or a glint at a corner is usually enough. Painting too many dilutes the effect.
For extra punch, put highlights on a separate layer set to Add or Color Dodge. That also makes them easy to isolate if you later animate them.
Step 3: Colorize with a Gradient Map
Once your grayscale metal looks convincing, Procreate's Gradient Map (Adjustments > Gradient Map) turns it into any metal you like. The map assigns a color to each brightness level, so your banding stays intact while the hue changes.
A practical setup:
- Merge your grayscale shading into one layer, or apply the map to a group.
- Open Gradient Map and edit the gradient.
- Add several color nodes, not just two. Five works well: a deep shadow, a dark mid, a mid, a light mid, and a bright highlight.
- Shift hue as you go, instead of only changing brightness. Gold, for example, tends to go toward a warm brown or orange in the shadows and a pale yellow or cream in the highlights. Silver can lean slightly blue in the shadows and warm white in the highlights.
Building palettes ahead of time saves a lot of work. You can save a set of metal colors (gold, silver, copper, brass, rose gold) and reuse them across projects. You can also generate a palette from a photograph of real metal: in the Colors panel, open Palettes, tap the plus icon, and choose New from Photo. This pulls real-world color relationships that are often better than ones chosen by eye.
Because the map is applied per layer or group, you can give different parts of one illustration different metals. A robot with a copper body and silver joints is just two Gradient Maps on two layers.
Alternative Approach: Draw Metallic Gradients Directly
If you only need a metallic fill for lettering, a badge, or a background, you can skip the full shading process. Choose a very dark and a very light version of the same hue, then draw bands of those colors side by side and blend them. Drag a stroke and hold it to snap it straight, then fill an area to create hard-edged bands. Alternating dark, light, and dark again gives a foil-like sheen.
The key difference from Photoshop is that Procreate's gradient is painted, not parametric. You can't adjust the stops after the fact, so plan the bands before you commit, or keep each band on its own layer.
Alternative Approach: Metallic Textures Clipped to Artwork
Another fast route is to use a photographed or scanned metallic texture.
- Import the texture through Actions > Add > Insert a Photo or Insert a File.
- Place it above the layer you want to turn metallic.
- Clip it to that layer, or select the layer content, invert if needed, and cut the texture so it appears only inside the shape.
- Adjust Hue, Saturation, and Brightness to change the metal color. Desaturating slightly often makes the result look more refined.
This works well for outlines, lettering, and decorative accents. Its limitation is that the texture has no relationship to your object's form. It won't follow a curve or respond to your light direction, so it tends to look flat on 3D-looking subjects. Use it for flat graphic work and use painted banding for volumes.
Adding Brushed Metal, Scratches, and Worn Paint
Once the base metal works, small details sell the material.
- Brushed metal: Use a default Procreate brush to paint thin value variations. A quick trick is to draw a stroke and erase it with the same brush at the same size, which leaves subtle streaked variations. Keep the streaks running in one direction.
- Scratches and dings: Cut thin, light lines and short dark gaps with a small hard brush. Vary their length and opacity.
- Chipped paint: Paint a colored coat over the metal, then erase irregular patches to reveal the metal below. Shrink your brush and lighten the edges of the chips. Add a thin shadow on the upper side of each chip to suggest paint thickness, and a thin highlight on the lower edge.
- Smudging: Use the Smudge tool sparingly inside worn areas to mimic grime and soften edges.
Common Mistakes
- Low contrast. The most frequent reason metal looks fake. Widen the value range.
- Smooth gradients only. Without hard transitions, the surface reads as satin plastic.
- Too many specular highlights. Keep them small, deliberate, and placed on edges that face the light.
- Inconsistent reflections. If a chrome object sits in a scene, its reflections should hint at the surroundings, such as a bright sky above and a dark ground below.
- One-note color. A single hue at different brightness levels looks flat. Shift hue between shadow and highlight.
Taking Procreate Metal into a Motion Pipeline
Many motion designers use Procreate for look development, textures, and illustrated elements, then animate elsewhere. A few habits make that handoff easier:
- Keep the base shape, shading, color map, and highlights on separate layers, and export as PSD so you can rebuild them in After Effects.
- Export highlights on their own layer. In After Effects, you can then animate them with a track matte or a moving mask to create a light sweep across the surface.
- Work at a high canvas resolution. Metal depends on crisp edges, and upscaling soft art later blurs the highlight transitions.
If you extend a finished metallic still into motion with an AI video tool, check that the metal's highlights and reflections stay consistent from frame to frame before you commit to it in a final shot.
Quick Checklist
- Block shapes on separate layers, with a fixed light direction.
- Shade in grayscale with strong contrast.
- Paint light–mid–dark–mid–light bands, mixing soft and hard transitions.
- Add a few sharp specular highlights on a separate layer.
- Apply a multi-node Gradient Map to set the metal type.
- Add scratches, brushing, or chipped paint for realism.
- Export layered files for compositing or animation.
Metal in Procreate comes down to disciplined value control. Get the banding right in grayscale and the color is the easy part.