How to Make Smooth Curved Lines in Procreate
StyleFrame Team9 min read
The smoothest curved lines in Procreate come from raising StreamLine in Brush Studio, adding some Stabilization, and drawing each curve in one confident stroke. For shapes a stabilizer can't fix, such as ellipses, arcs, and S-curves, use Quick Shape (draw and hold) and Edit Shape, or reshape a rough line with Liquify's Push tool. Everything below is about making curves clean enough to hand off to a motion pipeline, where wobble gets magnified once a line is animated or scaled.
Why Smooth Curves Matter More in Motion Work
A slightly lumpy curve in a static illustration is easy to overlook. In an animated line, such as a write-on, a stroke reveal, a mask edge, or a rotoscoped contour, every irregularity becomes a visible wobble. If you're building boards, hand-drawn elements, or style references in Procreate for an After Effects or Nuke comp, clean curves save you retouching later.
Procreate gives you several tools for this. They work at different stages: while drawing, after drawing, and when you export.
Step 1: Set StreamLine in Brush Studio
StreamLine is the most direct fix for shaky curves. It smooths the stroke as you draw, so the line follows a gentler path than your hand actually took.
- Tap the brush you want to use to open Brush Studio.
- Make sure Stroke Path is selected in the left-hand list.
- Find StreamLine under Stroke Properties and raise the Amount.
- Tap Done and draw a test curve.
At low values you'll see little change. At high values the line develops a slight "pull," where the stroke trails your pencil and settles into a smoother arc. That pull is the smoothing at work. Maximum StreamLine suits inking and lettering, but you often want a value somewhere in the middle so the line still feels responsive.
Duplicate the brush before you edit it (swipe left on the brush and choose Duplicate). That way your original stays intact, and you can reset a brush later from the About this Brush tab if you've over-tuned it.
Step 2: Add Stabilization (Brush-Level First)
Stabilization is a separate control from StreamLine. In Brush Studio, the Stabilization tab has two sliders:
- Stabilization Amount smooths and straightens the stroke.
- StreamLine Amount reduces wobbles and shakes.
Start with modest values and increase them until your long curves look clean without feeling disconnected from your pencil.
Global Stabilization
There's also a global setting that overrides individual brushes. Open the Actions (wrench) menu, go to Prefs > Pressure & Smoothing, and adjust the Stabilization slider. A value around 10–15% is a reasonable starting point.
The common trap is forgetting it's on. If your Apple Pencil suddenly feels laggy or unresponsive on every brush, check global stabilization first. For that reason, most artists do better tuning smoothing per brush and leaving the global value low.
Step 3: Draw Curves Like You Mean It
Software smoothing helps, but stroke mechanics still decide whether a curve looks clean. A few habits make a real difference:
- Rotate the canvas. Turn the canvas so the curve bends in the direction your wrist moves most naturally. Don't force awkward angles.
- Use your whole arm. Curves drawn from the shoulder or elbow tend to be smoother than curves drawn from the fingers.
- Draw in one pass. Stop-and-go strokes create kinks. Commit to the curve, lift at the end, and undo if it's wrong.
- Warm up first. Quick ovals, arcs, and crosshatching help get the wobbles out before you start the real linework.
- Zoom for precision, zoom out to judge. Fine corrections happen zoomed in, but you'll judge the curve better at a size close to its final use.
Step 4: Use Quick Shape for Perfect Arcs and Ellipses
Quick Shape, which Procreate triggers when you draw and hold, snaps a rough stroke into a clean geometric one.
- Draw a rough ellipse, circle, or arc.
- Keep your pencil on the screen at the end of the stroke. The shape snaps into a clean version.
- While still holding, you can resize and rotate it. Touching a finger to the screen constrains an oval to a perfect circle.
- After you lift, tap Edit Shape at the top of the canvas to keep adjusting it.
Once you tap away, the shape is committed and Edit Shape is gone. Further changes require the Transform tool, which can soften edges, so get the shape right before you commit.
Building Compound Curves from Arcs
Quick Shape handles simple forms well, but not complex ones. Draw a star and you get straight segments, but not a geometrically correct star. For organic curves, build the form from several snapped pieces:
- Snap one arc using Quick Shape and adjust it with Edit Shape.
- Tap away to commit it.
- Draw the next arc, snap it, and position it so it meets the previous one.
- Repeat until the contour is complete.
This is how you build smooth scalloped edges, cloud outlines, and repeating wave shapes without relying on hand steadiness.
Cutting a Curve Out of a Perfect Ellipse
A neat workaround for a single clean curve is to snap a large ellipse on its own layer, then erase or mask everything except the section you need. You get a mathematically smooth arc at whatever radius and angle you want.
Step 5: Fix S-Curves with Liquify Push
Quick Shape doesn't detect free-form curves. If you draw and hold an S-shape, you won't get a clean S back. Procreate's community has long asked for curve detection, and in the meantime a workable approach exists:
- Put a clean reference on a layer, such as a perfect circle or a straight line.
- Open Adjustments (the magic wand icon) and choose Liquify.
- Select the Push mode.
- Nudge the line into the curve you want, using small, patient movements.
Push works best with gentle, overlapping drags. Big pushes tend to distort the line's thickness and produce lumps. If a line is worth keeping, it can be quicker to redraw it with StreamLine on than to fight a heavily liquified one.
When Not to Smooth
Smoothing is a tool, not a default. Turn StreamLine and Stabilization down or off when you want:
- Energy and looseness in gesture drawing or sketches
- Intentional texture such as fur, frayed edges, or dry-brush strokes
- Sharp corners where smoothing would round off the intended angle
- Fine technical detail where precision matters more than flow
If a brush suddenly behaves strangely, check both the global and the brush-level settings before assuming something else is wrong.
Troubleshooting Common Curve Problems
Getting Smooth Procreate Curves into a Motion Pipeline
Clean curves only pay off if they survive the handoff. A few practical points:
- Work at a generous canvas size. Procreate is raster-based, so a curve drawn small and scaled up in After Effects will soften. Draw at or above your delivery resolution.
- Keep linework on its own layer with a transparent background, so you can export it as a PNG or layered PSD and import it into After Effects, Nuke, or Blender as a clean element.
- Trace when you need vector control. If you want editable shape paths for a write-on or a trim-paths animation, bring the line into a vector tool or use an auto-trace feature in your compositing software. Smooth source curves produce cleaner, simpler paths with fewer points.
- Use Procreate's animation tools for short loops if you're drawing frame-by-frame passes.
Where Styleframe Fits
Once you have a smooth hand-drawn curve or a stylized frame, you can use it as direction rather than as a finished asset. is an AI video and motion tool built for artistic control, and it's driven by your references instead of a text prompt alone.
- Frames-to-Video is keyframe-driven. You supply start and end frames, such as two Procreate drawings with the same curve in different positions, and guide the motion between them.
- Restyle and Ink-and-Paint are reference-driven style transfer. You can carry the look of your Procreate linework onto video clips, so the stroke character you've refined is applied consistently.
- 2D-to-3D and Turntable let you take a flat illustrated design and explore it as a 3D form.
- Remove Background and 4K Upscale help prepare elements and output for production.
Every generation starts from reference images, clips, and keyframes, and iteration is non-destructive, so you can refine without losing earlier versions. You keep your pipeline, and the smooth curves you drew in Procreate stay the foundation of the look.
Quick Workflow Summary
- Duplicate your brush, then raise StreamLine in Stroke Path.
- Add moderate Stabilization in Brush Studio, and keep global stabilization low.
- Rotate the canvas and draw each curve in a single fluid stroke.
- Use Quick Shape and Edit Shape for arcs and ellipses, and combine arcs for compound curves.
- Use Liquify > Push for S-curves that Quick Shape can't detect.
- Export at high resolution, on a transparent layer, for After Effects or Nuke.
FAQ
Why are my curves still wobbly with StreamLine on? The value may be too low, or you may be editing a different brush than the one you're drawing with. Confirm the setting on the exact brush, and try drawing the curve faster and in one pass.
Can Procreate detect curves the way it detects straight lines? Not for free-form curves. Quick Shape handles ellipses, circles, arcs built from them, and straight lines. For S-curves, use Liquify Push or redraw with higher StreamLine.
Should I use global or brush stabilization? Mostly brush stabilization. It lets each brush behave as intended, and it avoids the laggy feeling that a forgotten global setting causes.
Are Procreate curves usable as vector paths in After Effects? Not directly, since Procreate outputs raster images. Trace them in a vector tool or in After Effects if you need editable paths.