How to Make Shadows in Procreate
StyleFrame Team8 min read
In Procreate, the most reliable way to make a shadow is to add a new layer above your base color, clip it to that layer, set its blend mode to Multiply, and paint with a darker, saturated version of the base color. For a cast or drop shadow, duplicate the object's layer, fill it with a dark color, place it underneath, offset it away from the light, and soften it with Gaussian Blur. Procreate has no live drop shadow effect, so each shadow is built from ordinary layers you can adjust or delete later.
Decide on a light source first
Before you paint, decide where the light comes from. Every shadow in the piece depends on that choice, and inconsistent shadow direction is the most common reason an illustration looks flat or off.
Two kinds of shadow matter here:
- Form shadows sit on the object itself and describe its volume, such as the underside of a sphere or the crease between two petals.
- Cast shadows fall on another surface where the object blocks light, and include what most people call a drop shadow.
Harsh, direct light gives small, hard-edged shadows with strong contrast. Diffused light gives wider, softer shadows. Pick one and stay consistent across the whole piece.
Method 1: Multiply layer with a clipping mask
This is the standard approach for form shadows, and it keeps your work non-destructive.
- Create a new layer directly above the layer you want to shade. Keep it below your line art so it doesn't touch the lines.
- Tap the new layer and choose Clipping Mask. Anything you paint now appears only where the layer below has pixels. This is how you "draw just inside the drawing" without masking by hand.
- Tap the N on the layer and set the blend mode to Multiply.
- Pick the base color of the object, or sample it with the color picker, and paint your shadow areas.
Multiply darkens whatever is beneath it, so using the base color produces a darker version of the same hue instead of a muddy gray. If the result is too heavy, lower the layer opacity. If it doesn't seem to darken, the color you picked is probably too light. Pick a more saturated or slightly darker color and try again.
Name the layer "shadow" and keep it separate from the base color. If you want to test a different shadow color, make a second layer and compare the two. Deleting a test layer is easier than repainting.
Where to place shadows
Put form shadows where light is blocked or surfaces turn away from it:
- Where one shape overlaps another, such as petals, folds of fabric, or a hand over a sleeve.
- On the side opposite the light source.
- Heavier where a form curves sharply, lighter where it's flatter.
Vary the shapes. A shadow that follows the contour of the form reads as volume; a uniform band around the edge reads as an outline.
Method 2: Hard and soft edges with selection and airbrush
Most convincing shading mixes crisp and soft edges. A quick way to get both:
- Use the Selection tool to draw the area that should be shadowed. A freehand selection gives you a clean, hard edge.
- On your clipped Multiply layer, fill part of the selection with a soft airbrush. The edge of the selection stays crisp while the fill fades into the form.
- Switch to a small blending brush or smudge tool and soften only the edges that need it.
A physical rule helps with the blending: the farther the shadow-casting object is from the surface, the softer the shadow's edge. Contact points, like where a cup meets a table, should be darker and sharper. The far end of a cast shadow should be lighter and blurrier.
If your brush responds to pressure, you can often get hard and soft edges from one brush by varying pressure, so you don't have to switch tools constantly.
Method 3: Build a drop shadow manually
Procreate doesn't offer a live drop shadow layer style, and the team has said it wasn't a planned feature, so users build it by hand. The process is quick once you've done it a few times:
- Duplicate the layer you want to cast a shadow, such as a lettering layer or a cutout element.
- On the lower copy, make the shape dark. One way is to use the Adjustments menu's Hue, Saturation, Brightness to push brightness to zero.
- Use Transform to nudge the shadow copy a short distance away from the light. The Magnetics option helps you move it along a precise diagonal.
- Apply Gaussian Blur from Adjustments and drag until the edge softness looks right.
- Set the shadow layer to Multiply and reduce opacity until it sits believably on the background.
- Optionally, use Erase or Liquify to reshape the shadow so it bends around the surface it falls on.
For more realism, stack two shadows: a tight, dark contact shadow with a small blur, and a wider, lighter shadow with a large blur. It costs an extra layer, but it looks closer to real light than one blurred copy.
The tradeoff is that the shadow isn't linked to the object. If you move or edit the original later, you have to update the shadow too. Merge only when you're confident the element is final, and group the object and shadow layers so you can move them together in the meantime.
Method 4: Highlight and shadow from one shape
For simple graphic shapes, a geometric method gives you consistent results:
- Duplicate your shape twice and fill one copy white and one black. Both sit above the original.
- Use Transform to shift the white copy toward the light, leaving a crescent of the original visible on the opposite side.
- Select the original layer's contents, switch to the white layer, and Clear so only the crescent remains.
- Move the crescent back into alignment and apply Gaussian Blur, then lower opacity if needed.
- Repeat for the shadow, shifting the black copy away from the light.
This produces matching highlights and shadows on opposite sides of the form, which is useful for icons, stickers, and stylized objects.
Color and finishing tips
- Shadows are rarely pure black. They pick up color from their surroundings. Shift toward a cooler or more saturated hue rather than just darkening.
- Highlights aren't always white. Add or Screen layers work well for light effects, but tint them to match the light's color.
- Use layers and masks. Keep light and shadow on separate layers so you can adjust each without touching the base art.
- Add texture sparingly. A texture layer at low opacity with a suitable blend mode can break up overly smooth gradients.
- Check at small size. If the shadow structure isn't visible when you zoom out, it's too subtle.
Keeping shadows usable in a motion pipeline
If your Procreate artwork is going into a compositing or motion app or a 3D scene, how you structure shadows matters as much as how they look. A flattened PNG locks everything together. Layered exports let you animate, relight, and composite the pieces.
- Keep the base color, form shadow, and drop shadow on separate layers. Export them in a layered format, or export layers individually as transparent images, so you can animate the object and its shadow independently.
- Check that your Multiply layers carry their blend mode across. If a layer doesn't behave the same in your compositing app, set the blend mode again there or bake it to a normal layer with a transparent background.
- Keep the shadow's offset and blur consistent with the light direction you'll use in the composite. If you plan to move the object, a separate shadow layer can be re-offset and re-blurred in your compositing app.
- Export at your final output resolution or higher, since blurred shadows band easily when scaled up.
Where Styleframe fits
Shadows painted in Procreate are good for establishing look and lighting in a single frame. Turning that frame into motion is a separate step, and AI video and motion tools such as Styleframe are one option.
A practical workflow: finish your key illustrations in Procreate, with the shadows exactly as you want them, and use them as reference frames or keyframes in the motion tool you choose. When generation is driven by your reference images, the lighting direction and shadow style you painted can help guide the result.
Motion tools don't replace the careful shadow work you do in Procreate; they extend that work into moving images while you keep control of the compositing stage, where you can still add, adjust, or replace shadows with your normal tools.
Troubleshooting common shadow problems
- The Multiply layer isn't darkening anything. Choose a darker, more saturated color, or confirm the layer is actually set to Multiply and not just named "shadow."
- Paint spills outside the shape. The layer isn't clipped. Enable Clipping Mask.
- The drop shadow looks pasted on. Reduce opacity, increase blur with distance, and darken the contact point.
- Shadows look muddy. Avoid pure black. Pick a hue-shifted version of the base color instead.
- The offset is hard to control. Use Magnetics in Transform to move the shadow along a fixed axis.
Summary
For form shadows, use a clipped Multiply layer and the base color. For cast shadows, duplicate the object, darken it, offset it, and blur it. Keep every element on its own layer, and decide on the light direction before you paint. Those habits make the artwork more convincing in Procreate and easier to animate, relight, and composite once it leaves the app.