How to Make Rulers Procreate
StyleFrame Team8 min read
Procreate has no built-in ruler tool, so you make one yourself. The most reliable way is to turn on the 2D Grid under Drawing Guides and set its division size to match the units you need. If you want a ruler with tick marks, build a strip on a canvas with a known pixel size and DPI, or draw it in a vector app and paste it in. Either way, calibrate it against the grid before you trust it.
Does Procreate Have a Ruler?
No. Procreate's own help documentation says it has no ruler tool, and users have asked for one on the forums for years. Requests include a transparent slide-around ruler like the one in Apple Notes, pixel-length readouts for lines, and guides that extend beyond the canvas.
What Procreate does have are Drawing Guides, including the 2D Grid, Perspective, and Symmetry. These can stand in for most ruler jobs once you set them up on purpose. You'll need a workaround for anything the guides can't do, such as tick marks, French curves, or crop marks.
Method 1: Use the 2D Grid as a Ruler
This is the fastest option, and it needs no imported assets.
- Open Actions → Canvas and toggle on Drawing Guides.
- Tap Edit Drawing Guide, then choose 2D Grid from the bottom tabs.
- Tap the grid size readout above the slider and type a value with the keyboard.
- Adjust opacity and thickness so the grid doesn't fight your artwork.
The math is simple. Procreate's own example uses a 4000 × 4000 px canvas with a 250 px grid, giving 16 × 16 squares. Each square can then stand for a real-world unit, such as one square meter in a floor plan.
For print work, start from a canvas preset, such as A4 rotated to landscape, and set the grid to 1" squares. A design resized to occupy 4 × 2 squares will print at 4 × 2 inches. If you print on US Letter, use the Paper canvas template instead of A4.
The grid measures well but is awkward for fine increments. If you need millimeter or sixteenth-inch readability, the grid alone gets cluttered. That's when you build a dedicated ruler.
Method 2: Build a Ruler Template Layer
A ruler template is a transparent layer, or a small separate file, with tick marks you can drop onto any canvas and slide around. The catch is that it only measures correctly if its pixel dimensions and DPI match your working canvas.
Choose a DPI that makes the math clean
Pick the DPI first, because it determines whether your ticks land on whole pixels:
- 254 DPI: 1 mm = 10 px and 1 cm = 100 px. This suits metric rulers.
- 300 DPI: 1 inch = 300 px, but 1 cm is about 118.11 px, so metric ticks will round and drift.
- 320 DPI: 1/8" = 40 px and 1/16" = 20 px. This works well for fractional inches.
Print-ready work usually lives at 300 DPI, so a common compromise is to build inch rulers at 300 DPI and accept rounding on metric ones. If you only need the ruler for on-screen reference, use whichever DPI is cleanest.
Build the strip
- Create a custom canvas sized to the ruler's length. For example, 8" at 320 DPI is 2560 px wide. Make it short, around 200 px tall.
- Turn on the 2D Grid and set the division to your smallest tick spacing, such as 20 px.
- Draw one major tick (inch or centimeter), one mid tick (half), and one minor tick.
- Select the tick group, duplicate it, and move the copy exactly one interval over, checking the offset visually against the grid.
- Repeat, merge the ticks into one layer, and add numerals with the Text tool.
- Export the strip as a transparent PNG, and save the native Procreate file as well.
Free pre-made ruler files exist if you'd rather skip this. Some creators publish inch and centimeter sets at 300 DPI as Procreate files and individual PNGs. Read the usage notes before you rely on one, because copying a layer from one canvas to another can scale it unexpectedly.
Check the layer-copy quirk
Pasting a layer between canvases of different sizes or DPIs can change its apparent dimensions. After you paste a ruler into your working file, measure it against the 2D Grid. If one inch on the ruler doesn't span exactly one grid square, the paste has scaled it, and your measurements will be wrong. Undo and rebuild the ruler at your working canvas's DPI.
Method 3: Draw the Ruler in a Vector App
Hand-placed ticks are fine for rough work, but a vector app gives you exact spacing. Apps like Graphic or Vectornator can create a ruler at precise dimensions.
- Make a document at the same pixel size and DPI as your Procreate canvas.
- Create the tick marks using the app's grid, snapping, or repeat tools.
- Group the marks, copy the group, and paste it into Procreate.
- Because the pixel size and DPI match, the paste should align without manual correction.
You can also go the other way. Import your finished painting into the vector app, add rulers or crop marks there, and export a PDF. The marks stay vector and sharp, but make sure the image is large enough that the painting doesn't lose resolution.
Adding Bleed and Crop Marks
Print jobs are the most common reason people want a ruler. A typical case is a 9" × 7" file where the printer needs trim lines at 8.75" × 6.75". Procreate has no print-mark feature, so use a bleed-visualizer workflow:
- Make two canvases: one at the final trim size, and one at the larger size that includes bleed.
- Paint on the larger canvas.
- On the smaller canvas, fill the whole canvas with any color and copy it.
- Paste it into the larger canvas and select that rectangle.
- Invert the selection and fill a new layer.
You now have a separate layer showing the bleed zone, so you can confirm nothing important falls in the area that will be cut. Keep it on its own layer and hide it before export.
For the marks themselves, a vector app is the better route. Build the marks at the right size, group them, and paste or export as described above. Drawing them by hand in Procreate works but is easy to get wrong.
Quick Straight Lines Without a Ruler
Not every task needs a full ruler. Procreate has a few built-in straightening aids:
- Draw and hold: Draw a line and keep your Pencil on the screen, and the stroke snaps straight.
- QuickShape: Hold at the end of a drawn shape to snap it into a cleaner line or shape.
- Drawing Assist: With a guide active, strokes follow the guide. This works with Symmetry.
These give you straight lines, but not measured ones. For known lengths, you still need the grid or a ruler layer.
Common Mistakes
- Mismatched DPI: A ruler built at 300 DPI doesn't measure correctly on a 72 DPI canvas.
- Skipping calibration: Always check the ruler against the grid after pasting.
- Leaving helper layers on during export: A ruler or bleed layer left visible will show up in your exported file, so hide it first.
- Using a tiny ruler on a large canvas: Scaling a small PNG up blurs the ticks and breaks the measurements. Build the ruler at full size.
Taking Procreate Artwork Into a Motion Pipeline
If your Procreate work is headed for animation or video, the measurements you set up here carry through. Keep the canvas at a pixel size that matches your composition, such as 3840 × 2160 for 4K, and use the grid to place elements consistently across frames. Export flattened or layered files and bring them into After Effects, Premiere Pro, Nuke, or Blender as usual.
If you want to explore AI-assisted motion work from your Procreate frames, is one tool to look at. Your precise Procreate layout work stays the source of truth, and the motion tool extends it.
FAQ
Can I get a ruler in Procreate with a plugin or setting? There is no ruler setting. You use the 2D Grid, an imported ruler layer, or marks created in a vector app.
How do I measure in inches or centimeters? Set the canvas DPI, then set the 2D Grid division to the pixel count that equals your unit. At 300 DPI, 300 px is one inch.
Why is my imported ruler the wrong size? Most often the canvas DPI or pixel size doesn't match the ruler's source, or the layer was scaled when pasted. Rebuild the ruler at your canvas's settings and recheck against the grid.
What's the best approach for print crop marks? Make a bleed canvas, create a visual bleed layer, and add marks in a vector app. Export from the vector app if you need sharp, editable marks.