How to Make Realistic Brushes in Procreate
StyleFrame Team7 min read
A realistic Procreate brush starts with a real-world texture, not a default shape. Scan or photograph actual media such as pastel, ink, charcoal, or paper, then import it into Brush Studio as the Shape or Grain source. After that, tune Stroke Path (spacing, jitter, fall off), pressure and tilt response, and stabilization until the strokes behave like the physical tool. The key is variation: real marks are never identical from one stamp to the next.
What Makes a Brush Look Realistic
Every Procreate brush is built from two things: a shape, which works like a stamp or crayon tip, and a grain, the texture that shape reveals as it moves. Digital-looking brushes usually fail in one of three ways:
- The shape is too clean (a perfect circle or a procedural blotch).
- The grain is a tiled, obviously repeating pattern.
- The stroke has no variation, so every stamp is identical and evenly spaced.
Realism comes from fixing all three. Use captured source material, make sure the grain doesn't betray its tiling, and add controlled randomness through Stroke Path and Apple Pencil dynamics.
Step 1: Capture Source Material From Real Media
Procreate's built-in source library is fine for experiments, but the most convincing brushes come from physical marks. For a pastel brush, for example, make tip shapes with a black pastel on paper, scan them in black and white at a high resolution (600 dpi is a reasonable target), and clean them up in an image editor.
A few rules save a lot of frustration:
- Work large and square. Build source images on a square canvas, around 10 × 10 inches at 300 dpi. Non-square images get distorted, and small ones turn blurry.
- Use pure black and white for opaque results. Gray or colored pixels produce a semi-transparent brush. That can be useful for soft media, but it should be a choice.
- Know how Procreate reads values. White is treated as opaque and black as transparent. If your mark is black on white, you'll often need to invert the image, which you can do by tapping the source with two fingers in the editor.
- Mind the file format. A black design on a transparent PNG reads as an empty square. Save as a JPG with a solid white background, or make the design white if you're using a transparent PNG.
For grain, photograph or scan surfaces that carry texture: cold-press watercolor paper, painted washes, sand, bark, soil, or concrete. Crop to a 1:1 ratio so the texture imports cleanly.
Step 2: Create a Brush Set and a New Brush
Keep your work out of Procreate's stock brush sets so it's easy to find and back up.
- Open the Brush Library and scroll to the top.
- Tap + to create a new brush set and name it.
- Inside that set, tap + to open Brush Studio with a blank brush.
You can also start from an existing brush instead: swipe left on it, tap Duplicate, then open the copy. This is often the faster route for realistic media, because a good default pencil or charcoal already has sensible pressure behavior. Duplicating also protects the original. Rename your copy in the About This Brush tab so you don't lose track of versions.
Step 3: Set the Shape
In Brush Studio, open Shape and tap Edit. Use Import to bring in your scan from Photos or the clipboard, or choose from the source library for a starting point.
Tips for shape sources:
- Make several tip variations from the same medium, such as a flat edge, a worn corner, and a broken chip. Realistic brushes often come from the same capture session with small differences.
- If the stroke shows the stamp pointing the wrong way, enable Orient to iPad Screen in the General settings. This matters for stamp-style brushes and textures that shouldn't rotate with your stroke.
- Test the shape at a few sizes before committing. Detail that looks good at 100% can turn to mush when scaled.
Step 4: Set the Grain
Grain is where most of the "paper tooth" and material feel comes from. Open Grain, tap Edit, and import your texture. Then test how it behaves as you paint.
If your texture isn't seamless, you'll see tile edges when painting at large sizes. Fix this in your image editor, or use Procreate's Clone tool to patch and blend the edges before importing. Setting grain scale and zoom thoughtfully also helps, because a texture scaled too small repeats visibly.
Step 5: Tune Stroke Path
Stroke Path is where a stamped sequence turns into a believable mark. According to Procreate's Brush Studio documentation, the stroke is built by plotting many points along your path, and the main controls are:
- Spacing: Sets how often the shape stamps along the path. High spacing shows individual stamps; zero merges them into a fluid line. Dry media like chalk usually sits at a moderate value so the grain breaks up; ink-like brushes go lower.
- Jitter (Lateral and Linear): Lateral shifts stamps perpendicular to the stroke; Linear shifts them along it. Small amounts break up the mechanical look. Both can respond to Apple Pencil pressure and tilt.
- Spacing Jitter: Adds randomness to the gaps between stamps. Note that high values still change spacing even when base Spacing is 0%, because of a minimum spacing value.
- Fall Off: Fades the stroke as it goes on, like a marker running out of paint. Subtle values mimic dry-brush endings.
Start with small values and increase them gradually. Over-jittered brushes look like noise rather than natural variation.
Step 6: Add Pressure, Tilt, and Stabilization
A brush that looks right in a static swatch can still feel fake when you draw with it. Open the pressure and tilt dynamics and connect them to the properties that matter for your medium:
- Size and opacity vs. pressure for pencil, charcoal, and ink.
- Tilt-based changes for pastel or graphite side strokes, where the angle of the tool changes the mark width and grain exposure.
- Taper for pen and brush-like endings.
For watercolor-style brushes, work with Taper, Dilution, Opacity, Flow, and Bleed to get the soft pooling edges that read as wet media.
Stabilization is the opposite problem. StreamLine smooths out wobble and is important for inking and calligraphy. For textured, sketchy, or charcoal brushes, keep it low or off, so linework stays natural. You can also set stabilization globally in Procreate's accessibility settings if you want it consistent across all brushes.
Step 7: Test, Compare, and Iterate
Create a fresh canvas and test the brush in realistic conditions:
- Make short taps, long strokes, fast scribbles, slow curves, and overlapping layers.
- Paint at small and large sizes.
- Set your brush next to a scan of the real medium and compare edge quality, grain density, and how strokes build up.
- Try black on white, white on dark, and a midtone color, since texture can read very differently depending on the background.
When it's right, tap Done to save it in your set. Duplicate before making major changes, so you keep known-good versions.
Fixing Common Brush Problems
- The brush paints nothing or a blank square. Check whether your image is black on a transparent PNG. Switch to a JPG with a white background, or invert the source.
- The texture looks blurry. The source was probably too small. Rebuild it at a larger square size.
- The stroke looks semi-transparent or washed out. Your source likely contains gray or color. Convert it to pure black and white if you want an opaque mark.
- The stamps are visible. Lower Spacing, or add a little jitter to disguise repetition.
- The texture tiles visibly. Fix the seams in your texture or adjust grain scale.
Using Custom Brushes Inside a Motion Pipeline
Procreate brushes can be useful beyond illustration. They can be used to paint hand-made textures, painted overlays, and style frames that give a project its look before anything is animated.
Final Thoughts
Making realistic Procreate brushes comes down to capturing real marks, importing them cleanly as shape and grain, and then layering controlled variation through spacing, jitter, fall off, and pressure response. Start from a duplicate, change one setting at a time, and test against the real medium. Once you have a small set you trust, you'll have a reusable toolkit for illustration, texture work, and style frames that carry through to your motion projects.