StyleFrame
Log InGet StartedGet Started for Free
Log InGet StartedGet Started for Free

Upgrade Your Plan

-20%

Free

Create with 250 Credits:

~1 video at
4s

or 20+ Images

$0
/month

This includes:

  • 250 Free Credits
  • All Image Tools
  • All Post-Production Tools
  • No Watermark
  • Commercial License
  • Full-Resolution 1080p Output
  • Export Image Sequences
  • Create 3 at once

Basic

Create with 1,000 Credits:

~5 videos at
4s

or 50+ Images

$9
/month

This includes:

  • ~110 Credits / $
  • All Image Tools
  • All Post-Production Tools
  • No Watermark
  • Commercial License
  • Full-Resolution 1080p Output
  • Export Image Sequences
  • Create 3 at once

Pro

Most Popular

Create with 5,000 Credits:

~25 videos at
4s

or 400+ Images

$39
/month

This includes:

  • ~130 Credits / $
  • All Image Tools
  • All Post-Production Tools
  • No Watermark
  • Commercial License
  • Full-Resolution 1080p Output
  • Export Image Sequences
  • Create 3 at once

Studio

Create with 15,000 Credits:

~80 videos at
4s

or 1,250+ Images

$99
/month
$79$999

This includes:

  • ~150 Credits / $ (Best Deal)
  • All Image Tools
  • All Post-Production Tools
  • No Watermark
  • Commercial License
  • Full-Resolution 1080p Output
  • Export Image Sequences
  • Create 5 at once

Enterprise

For larger studios and enterprises

Unlimited Output Across All Tools

Contact Us

This includes:

  • All Image Tools
  • All Post-Production Tools
  • No Watermark
  • Commercial License
  • Full-Resolution 1080p Output
  • Export Image Sequences
  • Create more at once
  • Dedicated Onboarding
  • Team Management
  • Custom / Centralized Billing
  • Single Sign-On (SSO)
  • Custom Security & Privacy
  • Priority Support

Frequently Asked Questions

Can I cancel my subscription any time?

Yes. You can cancel your subscription any time . On a monthly plan, your subscription ends after the current month. On an annual plan, it ends after the current year.

How do I cancel my subscription?

You can cancel, manage, upgrade, or downgrade your subscription any time . To avoid future charges, cancel at least five days before your billing period renews.

Do my monthly credits roll over?

Unused subscription credits don't stack on top of the next month's grant. Each billing period refreshes your balance up to your plan's credit amount. After your plan expires, you lose access to paid credits.

What's the difference between the monthly and annual plans?

The features you get are the same. The only difference is pricing. Annual billing is about 20% less per month, while monthly billing is more flexible.

For example, on Pro: monthly billing is $39/mo and you're billed $39 for the month. Annual billing is $30/mo and you're billed $360 for the year.

If you know you'll use Styleframe regularly, annual is usually the better deal. If you're just trying things out, start monthly. You can switch to annual any time.

What if I need more credits?

If you keep running out of credits, upgrade to Premium or Studio for a larger monthly amount. For high volume, custom needs, or unlimited credits, contact us about Enterprise.

What happens when I upgrade?

When you upgrade, you get the new plan's features right away. You're charged the full difference between the two plan prices, and the extra credits are added to your balance. Your renewal date stays the same.

What happens when I downgrade or cancel?

The change takes effect at the end of your current billing cycle. You keep paid features and remaining credits until then. When the cycle ends, paid credits reset with your new plan or the free plan.

How does Enterprise unlimited work?

Enterprise includes unlimited credits across Styleframe tools, plus API access and a shared organization workspace. It's built for larger studios with high or unpredictable volume.

To keep things reliable for everyone, we may apply fair use controls if we see unusual or automated activity. Contact us if you want to talk through Enterprise for your team.

How to Make Realism Stencil on Procreate

StyleFrame Team • October 24, 2026 • 8 min read

To make a realism stencil in Procreate, import a high-contrast reference photo, convert it to grayscale, and use Curves or Gradient Map to collapse it into three to five flat tones. Then trace or select each tone onto its own layer. Each layer becomes one stencil pass, ordered from lightest to darkest. Clean up the shapes, add bridges if you plan to cut a physical stencil, and export each layer as a separate PNG or PDF.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

The rest of this guide covers the full workflow, how to choose a reference that survives posterization, and how to carry the stencil look into motion work in After Effects.

What a "realism stencil" actually is

A realism stencil reduces a photographic image to a small number of flat, high-contrast shapes that still read as the original subject. Tattoo artists, airbrush painters, street artists, and screen printers all use the same logic. Each tone is a separate shape, and stacking the shapes rebuilds the image.

This differs from the simple "fill a silhouette" stencil effect that beginner Procreate tutorials cover. A silhouette stencil needs a single shape, which you can fill with ColorDrop using a Reference layer. A realism stencil needs a tonal breakdown: several layers, each isolating a different value range of the photo.

Decide the output before you start, because it changes how aggressive you need to be:

  • Physical stencil (cut or printed): shapes must be connected by bridges, and tonal steps should be limited to three or four.
  • Digital artwork or motion graphic: you can use more steps and softer edges, since nothing needs to hold together physically.
  • Reference for painting or tattooing: a guide with clear shadow and highlight boundaries is enough. Perfect cleanliness isn't required.

Step 1: Choose and prepare the reference

Stencil quality depends heavily on the source image. Photos with a single strong light direction break down into clean tonal shapes. Flat, evenly lit photos turn to mush.

Look for:

  • Clear separation between light and shadow planes
  • Detail in the eyes, edges, and focal areas (faces and hands are the usual tests)
  • Enough resolution to hold up at your target size

Create your canvas at the final print or delivery size at 300 DPI. Setting the size early avoids resampling later, which softens edges you've just made crisp. Import the photo through Actions > Add > Insert a photo and scale it to fill the canvas.

If the photo is small or soft, upscale it before importing. This is one place where an external upscaling tool can help, since a higher-resolution source lets tonal edges hold better when you threshold.

StyleFrame

AI Video Toolkit
for Motion Designers

One toolkit for controllable video generation, keyframe creation, and post production.

Step 2: Convert to grayscale and shape the values

Open Adjustments > Hue, Saturation, Brightness and drag Saturation to zero. Working in grayscale means you're making decisions about value only.

Next, open Adjustments > Curves and shape the tonal range:

  1. Pull the black point and white point inward slightly to stretch contrast.
  2. Add a mild S-curve so midtones separate from shadows.
  3. Check the image at small size. If the subject still reads when you pinch out, your values are working.

If the image is noisy or grainy, apply a small Gaussian Blur (Adjustments > Gaussian Blur) at a low percentage before you posterize. A touch of blur removes speckle that would otherwise produce hundreds of tiny islands in the stencil. Keep it subtle, or you'll lose the fine detail that sells realism.

Step 3: Posterize into flat tones

Procreate doesn't ship with a dedicated Threshold or Posterize adjustment, so you build one. There are two reliable approaches.

Option A: Gradient Map with hard stops

Gradient Map remaps the grayscale values to a gradient of your choosing. Create a custom gradient with hard-edged stops, for example black, dark gray, light gray, white, with no blending between them. The photo collapses into those discrete tones. Moving the stops left or right changes where each tone begins and ends, so you can tune how much area each tone covers.

Option B: Stepped Curves

Duplicate the grayscale layer, then use Curves to create a staircase. Drag points so the curve jumps abruptly from one level to the next. The result is similar to a posterize effect, and you can adjust each step independently. This is slower to set up, but it's useful when you want precise control over one specific shadow boundary.

Aim for three to five tones. Fewer than three loses form, and more than five starts to look like a photograph again and defeats the purpose of a stencil.

Step 4: Separate each tone onto its own layer

Once the image is posterized, split it into stencil passes. Flatten or merge a copy of the posterized layer, then use these steps for each tone:

  1. Select the Selection tool and choose Automatic.
  2. Tap inside a tonal area and drag to set the selection threshold, so the selection covers the full tone without bleeding into neighbors.
  3. Create a new layer and fill the selection with solid black (drag the color circle into the selection, or use Fill Layer).
  4. Repeat for each tone on its own layer.

For cleaner results, set the posterized layer as a Reference layer. ColorDrop on a new layer will then fill according to the reference rather than flooding the whole canvas. If fills leave a white halo at the edges, adjust the ColorDrop Threshold by holding after the drop and sliding sideways.

Name the layers clearly (Pass 1 Highlights, Pass 2 Midtones, Pass 3 Shadows). When you're managing five or six passes, ordering mistakes cost more time than the setup does.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

Step 5: Clean up shapes and add detail

Automatic selections leave stray specks and ragged edges. Zoom in and tidy each pass:

  • Use the Eraser and a hard-edged brush to remove isolated pixels that wouldn't survive cutting or printing.
  • Use Alpha Lock to repaint within an existing shape without altering its outline.
  • Use Selection > Feather sparingly. Feathering is fine for digital work but hurts a cut stencil.
  • Redraw critical features, such as eyes, lips, and edges of highlights, by hand on a separate detail layer. Hand-drawn accents often make the difference between "filter output" and a convincing realism stencil.

For a physical stencil, check that no interior shape is floating. Letters like "O" and eyes with pupils need bridges, small connecting strips that keep the cut-out pieces attached. Draw bridges as thin bars in the background color across the shape.

Step 6: Add registration marks and test the stack

If you'll apply the passes sequentially, add registration marks. Place small crosses or corner marks in the same position on every layer so passes align when printed or cut. Keep these on a separate layer you can toggle.

Then check the result:

  • Set each pass to a distinct color temporarily and view the stack together.
  • Toggle layers individually to confirm each shape is clean and complete.
  • Zoom out to confirm the overall image still reads as the subject.

If the face looks flat, the usual fix is adding one more tone in the midrange or sharpening the boundary of the key shadow shape, rather than adding detail everywhere.

Step 7: Export for print, cutting, or compositing

Use Actions > Share and choose the format that matches your next step:

  • PNG for single passes with transparency
  • PDF for print at actual size
  • PSD to keep all layers intact for After Effects or Photoshop

For physical stencils, invert as needed so the area to be removed is solid. Check scale on a test print before cutting expensive material.

StyleFrame

AI Video Toolkit
for Motion Designers

One toolkit for controllable video generation, keyframe creation, and post production.

Taking the stencil look into motion

For motion designers, a realism stencil is often a style target, not a final deliverable. A few ways to use it in an After Effects pipeline:

  • Import the PSD as a composition with layers preserved, then animate each pass separately. Staggering reveals, adding slight misregistration, or jittering edges at a low frame rate gives a hand-cut, screen-printed feel.
  • Match it procedurally. After Effects has Threshold, Posterize, and Find Edges effects you can use to approximate the same look on live footage, though the results are more mechanical than a hand-built stencil.
  • Use your Procreate frames as style references. Rather than rebuild the look on every shot, treat the finished stencil as the target.

That last approach is where a reference-driven AI video tool can fit. You feed in your Procreate stencil as the style reference and a clip or keyframes as the content, so the generation follows both rather than guessing from a text prompt. In practice, the hand-built Procreate stencil defines the look, and the tool helps you extend that look across moving footage, leaving the final comp in your usual tools.

Common mistakes to avoid

  • Too many tones. More than five or six steps reads as a filter, not a stencil.
  • Skipping the pre-blur. Noise in the photo becomes noise in your shapes.
  • Low-resolution canvas. Posterized edges get jagged when scaled up later.
  • Unreadable midtones. If two adjacent tones are too close in value, merge them and use the saved pass for something else.
  • Forgetting bridges. A stencil that looks perfect on screen can fall apart the moment you cut it.

Quick checklist

  1. Pick a strongly lit reference and set the canvas at 300 DPI.
  2. Desaturate and shape contrast with Curves.
  3. Lightly blur, then posterize with Gradient Map or stepped Curves.
  4. Select each tone and fill it on its own layer.
  5. Clean up shapes, redraw key details, and add bridges if needed.
  6. Add registration marks and test the stack.
  7. Export as PNG, PDF, or PSD, depending on whether you're printing, cutting, or compositing.

Once the process is set up, repeating it on new references takes a fraction of the time. The tonal separation is the part that determines how realistic the stencil looks, so spend most of your effort there.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

Oct 24, 2026

ContactPrivacy PolicyTerms of Service

Copyright © 2026 - All rights reserved by StyleFrame

How to Make Realism Stencil on Procreate

StyleFrame Team • October 24, 2026 • 8 min read

To make a realism stencil in Procreate, import a high-contrast reference photo, convert it to grayscale, and use Curves or Gradient Map to collapse it into three to five flat tones. Then trace or select each tone onto its own layer. Each layer becomes one stencil pass, ordered from lightest to darkest. Clean up the shapes, add bridges if you plan to cut a physical stencil, and export each layer as a separate PNG or PDF.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

The rest of this guide covers the full workflow, how to choose a reference that survives posterization, and how to carry the stencil look into motion work in After Effects.

What a "realism stencil" actually is

A realism stencil reduces a photographic image to a small number of flat, high-contrast shapes that still read as the original subject. Tattoo artists, airbrush painters, street artists, and screen printers all use the same logic. Each tone is a separate shape, and stacking the shapes rebuilds the image.

This differs from the simple "fill a silhouette" stencil effect that beginner Procreate tutorials cover. A silhouette stencil needs a single shape, which you can fill with ColorDrop using a Reference layer. A realism stencil needs a tonal breakdown: several layers, each isolating a different value range of the photo.

Decide the output before you start, because it changes how aggressive you need to be:

  • Physical stencil (cut or printed): shapes must be connected by bridges, and tonal steps should be limited to three or four.
  • Digital artwork or motion graphic: you can use more steps and softer edges, since nothing needs to hold together physically.
  • Reference for painting or tattooing: a guide with clear shadow and highlight boundaries is enough. Perfect cleanliness isn't required.

Step 1: Choose and prepare the reference

Stencil quality depends heavily on the source image. Photos with a single strong light direction break down into clean tonal shapes. Flat, evenly lit photos turn to mush.

Look for:

  • Clear separation between light and shadow planes
  • Detail in the eyes, edges, and focal areas (faces and hands are the usual tests)
  • Enough resolution to hold up at your target size

Create your canvas at the final print or delivery size at 300 DPI. Setting the size early avoids resampling later, which softens edges you've just made crisp. Import the photo through Actions > Add > Insert a photo and scale it to fill the canvas.

If the photo is small or soft, upscale it before importing. This is one place where an external upscaling tool can help, since a higher-resolution source lets tonal edges hold better when you threshold.

StyleFrame

AI Video Toolkit
for Motion Designers

One toolkit for controllable video generation, keyframe creation, and post production.

Step 2: Convert to grayscale and shape the values

Open Adjustments > Hue, Saturation, Brightness and drag Saturation to zero. Working in grayscale means you're making decisions about value only.

Next, open Adjustments > Curves and shape the tonal range:

  1. Pull the black point and white point inward slightly to stretch contrast.
  2. Add a mild S-curve so midtones separate from shadows.
  3. Check the image at small size. If the subject still reads when you pinch out, your values are working.

If the image is noisy or grainy, apply a small Gaussian Blur (Adjustments > Gaussian Blur) at a low percentage before you posterize. A touch of blur removes speckle that would otherwise produce hundreds of tiny islands in the stencil. Keep it subtle, or you'll lose the fine detail that sells realism.

Step 3: Posterize into flat tones

Procreate doesn't ship with a dedicated Threshold or Posterize adjustment, so you build one. There are two reliable approaches.

Option A: Gradient Map with hard stops

Gradient Map remaps the grayscale values to a gradient of your choosing. Create a custom gradient with hard-edged stops, for example black, dark gray, light gray, white, with no blending between them. The photo collapses into those discrete tones. Moving the stops left or right changes where each tone begins and ends, so you can tune how much area each tone covers.

Option B: Stepped Curves

Duplicate the grayscale layer, then use Curves to create a staircase. Drag points so the curve jumps abruptly from one level to the next. The result is similar to a posterize effect, and you can adjust each step independently. This is slower to set up, but it's useful when you want precise control over one specific shadow boundary.

Aim for three to five tones. Fewer than three loses form, and more than five starts to look like a photograph again and defeats the purpose of a stencil.

Step 4: Separate each tone onto its own layer

Once the image is posterized, split it into stencil passes. Flatten or merge a copy of the posterized layer, then use these steps for each tone:

  1. Select the Selection tool and choose Automatic.
  2. Tap inside a tonal area and drag to set the selection threshold, so the selection covers the full tone without bleeding into neighbors.
  3. Create a new layer and fill the selection with solid black (drag the color circle into the selection, or use Fill Layer).
  4. Repeat for each tone on its own layer.

For cleaner results, set the posterized layer as a Reference layer. ColorDrop on a new layer will then fill according to the reference rather than flooding the whole canvas. If fills leave a white halo at the edges, adjust the ColorDrop Threshold by holding after the drop and sliding sideways.

Name the layers clearly (Pass 1 Highlights, Pass 2 Midtones, Pass 3 Shadows). When you're managing five or six passes, ordering mistakes cost more time than the setup does.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

Step 5: Clean up shapes and add detail

Automatic selections leave stray specks and ragged edges. Zoom in and tidy each pass:

  • Use the Eraser and a hard-edged brush to remove isolated pixels that wouldn't survive cutting or printing.
  • Use Alpha Lock to repaint within an existing shape without altering its outline.
  • Use Selection > Feather sparingly. Feathering is fine for digital work but hurts a cut stencil.
  • Redraw critical features, such as eyes, lips, and edges of highlights, by hand on a separate detail layer. Hand-drawn accents often make the difference between "filter output" and a convincing realism stencil.

For a physical stencil, check that no interior shape is floating. Letters like "O" and eyes with pupils need bridges, small connecting strips that keep the cut-out pieces attached. Draw bridges as thin bars in the background color across the shape.

Step 6: Add registration marks and test the stack

If you'll apply the passes sequentially, add registration marks. Place small crosses or corner marks in the same position on every layer so passes align when printed or cut. Keep these on a separate layer you can toggle.

Then check the result:

  • Set each pass to a distinct color temporarily and view the stack together.
  • Toggle layers individually to confirm each shape is clean and complete.
  • Zoom out to confirm the overall image still reads as the subject.

If the face looks flat, the usual fix is adding one more tone in the midrange or sharpening the boundary of the key shadow shape, rather than adding detail everywhere.

Step 7: Export for print, cutting, or compositing

Use Actions > Share and choose the format that matches your next step:

  • PNG for single passes with transparency
  • PDF for print at actual size
  • PSD to keep all layers intact for After Effects or Photoshop

For physical stencils, invert as needed so the area to be removed is solid. Check scale on a test print before cutting expensive material.

StyleFrame

AI Video Toolkit
for Motion Designers

One toolkit for controllable video generation, keyframe creation, and post production.

Taking the stencil look into motion

For motion designers, a realism stencil is often a style target, not a final deliverable. A few ways to use it in an After Effects pipeline:

  • Import the PSD as a composition with layers preserved, then animate each pass separately. Staggering reveals, adding slight misregistration, or jittering edges at a low frame rate gives a hand-cut, screen-printed feel.
  • Match it procedurally. After Effects has Threshold, Posterize, and Find Edges effects you can use to approximate the same look on live footage, though the results are more mechanical than a hand-built stencil.
  • Use your Procreate frames as style references. Rather than rebuild the look on every shot, treat the finished stencil as the target.

That last approach is where a reference-driven AI video tool can fit. You feed in your Procreate stencil as the style reference and a clip or keyframes as the content, so the generation follows both rather than guessing from a text prompt. In practice, the hand-built Procreate stencil defines the look, and the tool helps you extend that look across moving footage, leaving the final comp in your usual tools.

Common mistakes to avoid

  • Too many tones. More than five or six steps reads as a filter, not a stencil.
  • Skipping the pre-blur. Noise in the photo becomes noise in your shapes.
  • Low-resolution canvas. Posterized edges get jagged when scaled up later.
  • Unreadable midtones. If two adjacent tones are too close in value, merge them and use the saved pass for something else.
  • Forgetting bridges. A stencil that looks perfect on screen can fall apart the moment you cut it.

Quick checklist

  1. Pick a strongly lit reference and set the canvas at 300 DPI.
  2. Desaturate and shape contrast with Curves.
  3. Lightly blur, then posterize with Gradient Map or stepped Curves.
  4. Select each tone and fill it on its own layer.
  5. Clean up shapes, redraw key details, and add bridges if needed.
  6. Add registration marks and test the stack.
  7. Export as PNG, PDF, or PSD, depending on whether you're printing, cutting, or compositing.

Once the process is set up, repeating it on new references takes a fraction of the time. The tonal separation is the part that determines how realistic the stencil looks, so spend most of your effort there.

StyleFrame

Professional AI Video Toolkit

Restyle footage, animate keyframes, and post-produce with reference-driven tools. Free to start.

Start Creating

Oct 24, 2026

ContactPrivacy PolicyTerms of Service

Copyright © 2026 - All rights reserved by StyleFrame