How to Make Rainbow Letters on Procreate
StyleFrame Team8 min read
To make rainbow letters in Procreate, write your lettering on its own layer, turn on Alpha Lock, paint horizontal bands of red, orange, yellow, green, blue, and violet across the letters, then blend the bands with the Smudge tool. For a more flexible result, put a rainbow gradient on a separate layer and clip it to the lettering, so you can recolor or shift it later without redrawing anything. Export as a transparent PNG or layered PSD if the lettering is headed into After Effects or another motion pipeline.
What You Need
- An iPad with Procreate installed
- An Apple Pencil or compatible stylus (you can finger-paint, but lettering is much harder without one)
- A rainbow palette. Build one in Procreate's Palettes tab or sample from a reference image.
Set up the canvas at the size you'll actually deliver. If the lettering will end up in a video comp, a 3840×2160 canvas or something proportional to your comp gives you room to scale without softness. Check the maximum layer count for that size in Canvas settings, because larger canvases allow fewer layers.
Step 1: Letter on a Dedicated Layer
Create a new layer and write your word in a solid, dark color. Thick, rounded, or brush-script letterforms work best because rainbow color needs surface area to read. Hairline strokes will just look like a thin streak of noise.
Before moving on, duplicate the lettering layer and hide the copy. That is your clean, untouched source if you want to try another coloring method later.
Method 1: Alpha Lock and Smudge
This is the quickest way to get a hand-painted rainbow look.
- Tap the lettering layer and choose Alpha Lock. Paint now only lands on existing pixels.
- Pick your first color and paint a band across the top of the word. Work down through the spectrum, giving each color roughly equal height.
- Select the Smudge tool and choose a soft brush, or a textured one if you want a gouache feel.
- Drag back and forth along the boundaries between colors. Smudge in the direction you want the blend to flow, horizontal for a flat-banded rainbow or diagonal for more energy.
- Add a few extra passes where bands look too abrupt, and leave some crisp edges if you want a stripe-like finish.
Smudge pressure matters. Too high and the colors turn muddy brown where complementary hues meet. A moderate setting usually blends without destroying saturation. Orange-to-green and red-to-blue transitions are where muddiness appears first, so smudge those lightly.
Method 2: Clipping Mask with a Gradient Layer
If you expect revisions, this approach is easier to adjust.
- Create a new layer above the lettering and paint a full-width rainbow across it, either as hard stripes or as a smooth blend.
- Tap the layer and choose Clipping Mask. The rainbow now shows only where the lettering below it has pixels.
- Move, scale, or rotate the rainbow layer with the Transform tool to position the spectrum however you like, without touching the letters.
- Blur the stripes with Gaussian Blur from the Adjustments menu if you want a smoother gradient.
The advantage is separation. You can swap the rainbow for a different palette, or nudge it so the color change lands between words instead of mid-letter. It also keeps your original lettering clean, which matters if the artwork gets reused with another color treatment.
Method 3: Gradient Map and Hue Shifts
Procreate's Adjustments menu offers quick ways to recolor existing artwork.
- Gradient Map remaps tonal values to a gradient you define. Letter in grayscale with soft shading, then map those values to a rainbow. Light areas get one end of the gradient and dark areas get the other, so the colors follow the form of the letters instead of running across them in flat bands.
- Hue, Saturation, Brightness lets you rotate the whole layer's hue. If you have one finished rainbow, you can create alternate versions by shifting hue, which is handy for generating variants for a client.
Gradient Map is the best choice if you want rainbow color that feels attached to the lettering's volume, with shading and highlights already baked in.
Method 4: Painting Each Letter a Different Color
Sometimes a classic "one color per letter" look is exactly what you want, especially for playful titles or kids' content.
- With Alpha Lock on, use Selection (the S-shaped icon) with Freehand or Automatic mode to select an individual letter.
- Fill it with a spectrum color by dragging from the color swatch to the selection, or paint it in.
- Repeat across the word, moving through the rainbow in order.
Add a slight color variation inside each letter, a lighter top edge and a deeper bottom, to avoid a flat sticker look.
Make It Look Finished
Plain bands of color can look cheap. A few additions go a long way:
- Outline layer: Place a new layer below the lettering, Alpha Lock a duplicate, fill it with a dark color, and expand it with a slight Gaussian blur or a stroked selection. A thin outline separates the rainbow from busy backgrounds.
- Shading: Add a new layer set to Multiply, clipped to the lettering, and paint soft shadow along the bottom edges with a deep purple or blue rather than gray. Colored shadows keep the rainbow clean.
- Highlights: Add another clipped layer set to Add or Screen and paint small highlights along top edges.
- Texture: Overlay a grain or paper texture clipped above everything at low opacity to take away the digital flatness.
- Color order: Keep the classic red-to-violet order unless you have a reason to break it. Reordering looks like a mistake instead of a style.
- Saturation: Pure, fully saturated hues can vibrate on screen and band badly after video compression. Slightly softening your palette often looks better in motion.
Rainbow Brush Option
If you want rainbow color to appear while you letter, open a brush's settings and look at the Color Dynamics section. Stamp color jitter, including hue variation, can make each stamp along a stroke shift color, producing a multicolor trail. It's less controlled than the painted methods, but it works well for casual, energetic lettering. Experiment with pressure and tilt influence, and duplicate the brush before editing so the original stays intact.
Export Settings for Motion Work
How you export determines how much flexibility you keep downstream.
- PNG with transparency: Hide the background color layer in the Canvas settings, then export as PNG. Good for a single finished piece.
- PSD: Preserves layers, blend modes, and clipping, so you can bring the file into After Effects as a composition with layers separate. Check that Procreate's blend modes translate as expected, since a few may look slightly different.
- Layer separation: Export the fill, outline, shadow, and highlight separately if you plan to animate or recolor them independently.
- Animation Assist: If you're animating frame by frame in Procreate, you can export a PNG sequence, GIF, or MP4. PNG sequence is the safest choice for a professional pipeline.
Procreate works in an RGB color space, so check your comp's color management when you import. Colors can shift if your project is working in a different space, and bright rainbow hues are the first place you'll notice.
Taking Rainbow Lettering into After Effects
Once the artwork is in your comp, a few techniques extend it:
- Animate the gradient: Rebuild the rainbow with Gradient Ramp or a Gradient Overlay layer style, then animate the position of the ramp across the letters.
- Cycle the hue: Apply Hue/Saturation and keyframe Master Hue (or use an expression to rotate it over time) for a continuous color-cycling effect.
- Track the shading: Keep your Procreate shadow and highlight layers separate, so you can leave them fixed while the hue cycles underneath.
- Add glow and light wrap: Rainbow lettering benefits from glow built from a duplicated, blurred, Screen-mode copy rather than a single flat effect.
If your lettering is going into a 3D scene, import it into Cinema 4D or Blender as a texture or image plane, or trace it to produce extrudable shapes.
Where Styleframe Fits
Procreate is excellent for authoring the hand-made artwork. Styleframe is an AI video and motion tool that you can use to extend that artwork into motion or other looks while keeping your own artwork as the reference.
Treat Styleframe as an additional source of material, not a replacement for your comp, so your compositing workflow stays the same.
As with any generative step, review results frame by frame. Fine lettering details can drift, so keep your original Procreate artwork as the reference of truth.
Troubleshooting
- Colors look muddy after smudging: Lower smudge strength, or switch to a gradient on a clipped layer.
- Rainbow spills outside the letters: Alpha Lock wasn't on, or you painted on a different layer. Undo and check the layer first.
- Edges look jagged after export: Increase canvas size or export at higher resolution. Don't upscale a small PNG in the comp.
- Colors shift in video: Check your project's color space, and lower saturation slightly on the most intense hues.
- Banding in gradients: Add a touch of noise or grain over the lettering to hide it.
Quick Summary
For fast, painterly results, use Alpha Lock and Smudge. For flexibility, clip a rainbow gradient layer to your lettering. For shaded, dimensional color, use Gradient Map. For anything headed to video, keep layers separate, export with transparency or as a PSD, and finish the animation in After Effects, where you have precise control over timing and color.