How to Make Procreate Vector
StyleFrame Team8 min read
Procreate only creates raster (pixel-based) artwork, so you can't draw true vectors in it. You make a Procreate drawing vector by exporting it as a PNG with a transparent background, then tracing it in a vector app such as Adobe Capture, Adobe Illustrator, Affinity Designer, or Linearity Curve. Clean, single-color line art on smooth brushes traces best, and the resulting SVG or AI file can then be taken into other design or motion apps.
Why Procreate Can't Make Vectors Natively
Procreate works on a pixel grid, which is why canvas setup revolves around resolution and DPI. A vector file stores paths, anchor points, and fills instead of pixels, so it scales without softening. Nothing inside Procreate converts between the two, so "making a Procreate vector" always means tracing: an app reads the pixel shapes and rebuilds them as paths.
Tracing is an interpretation, not a lossless conversion. The cleaner and simpler the source, the closer the vector will look to your original. The preparation steps below matter more than which tracing tool you pick.
Step 1: Prepare the Artwork in Procreate
Most bad vectors are caused by bad source files. Before you export:
- Use smooth brushes. Monoline and Studio Pen produce clean edges that trace into tidy paths. Textured brushes like Dry Ink tend to produce a mess of broken anchor points when traced.
- Ink in solid black for line work. Tracers decide between "shape" and "not shape" using a threshold, and pure black on a clean background gives them the clearest signal.
- Separate colors onto separate layers. If your piece has multiple colors, keep each one on its own layer so you can trace and recolor them individually.
- Turn off the background layer. Untick the background color so the export has a transparent background.
- Work at high resolution. More pixels give the tracer more edge information to work with.
- Add registration marks. A useful trick is to fill small black squares in the corners of a separate layer and include them in every layer's export. When you bring the traced layers into a vector app, those marks keep all pieces aligned. Delete them once everything is positioned.
Then export: tap the wrench icon, choose Share, choose PNG, and save the file. For layered work, export each layer (with the registration marks visible) as its own PNG.
Step 2: Choose a Tracing Method
Method A: Adobe Capture (free, iPad)
Adobe Capture is a free iPad app that only needs a free Adobe account, not a paid subscription. It suits simple black-and-white art, lettering, and individual elements for patterns.
- Save your PNG to the camera roll.
- In Adobe Capture, tap Import, choose the image, and select it from the camera roll.
- Switch to the Shapes module.
- Adjust the threshold dial until the preview captures all the detail you want without filling in gaps.
- Toggle Smooth on or off and compare the line quality.
- Confirm with the tick, tap Save, and name the shape.
- From your library, open the options menu on the saved shape and choose Share, then Export As, then SVG.
Capture is a good fit for simple work. For fuller, more complex illustrations, you'll usually want a more controllable tool.
Method B: Adobe Illustrator Image Trace
If you already have Illustrator, it gives you plenty of control. Place the PNG, select it, and run Image Trace. Choose a preset that matches the art: black-and-white logo or line work for ink drawings, a color preset for flat-color illustrations. Then:
- Expand the trace to get editable paths.
- Ungroup and delete stray white shapes that the tracer creates as background.
- For multi-color pieces, trace each color layer on its own, then recolor and stack them. This is generally more reliable than asking one trace to separate every color at once.
- Handle white elements deliberately. White artwork on a transparent PNG disappears against a white artboard, so place it on a dark background temporarily while you trace it.
Hand-lettering usually traces well because it is typically solid, smooth shapes, but check counters (the holes in letters like "a" or "e") after expanding.
Method C: Affinity Designer or Linearity Curve
Both open the SVG that Capture produces for cleanup, and Linearity Curve also offers an Auto Trace feature that converts a raster PNG directly into editable paths, then lets you refine, recolor, and export as SVG, PDF, PNG, or AI. These are practical options if you want to stay on the iPad or avoid an Illustrator subscription. Affinity Designer is also common for assembling vector pattern elements drawn in Procreate.
Handling Colored Artwork
Threshold-based tracers like Adobe Capture's Shapes module assume black and white, so full-color art needs a workaround:
- Split by color. Export each color layer as its own PNG, trace each in black and white, then recolor the resulting shapes in your vector app. This works on the same principle as screen-print separations.
- Raise the threshold so lighter colors register as solid, as long as the layer contains only one color.
- Use a color trace in Illustrator for flat-color art, then clean up the paths manually.
- Accept the limits. Soft gradients, grain, and watercolor-style textures don't survive vectorization well. If the look depends on texture, keep that piece as raster.
Cleaning Up the Traced Paths
Auto-trace gets you most of the way, not all of it. After tracing:
- Delete unwanted background shapes and stray specks.
- Simplify paths where there are too many anchor points. This keeps files light and makes them much easier to animate.
- Check corners and thin lines at high zoom, since this is where tracing errors show up.
- Group by color or by element, and name your layers. You will be grateful for this later.
- Export as SVG for general use, or as AI or PDF if your next app prefers them.
Using Your Vector in Motion Software
For motion work, the point of vectorizing is usually clean scaling and animatable shapes.
- Import the SVG or AI file into your motion software.
- Convert to shapes. If your software can turn vector layers into native shape layers, you get fills and strokes you can animate directly.
- Keep your layer structure. Because you separated colors and named elements earlier, each one can come in as its own animatable object.
- Check path complexity. Thousands of tiny anchor points from an overly literal trace can slow down playback and make shape animation harder to control.
When You Don't Actually Need a Vector
Many people vectorize because they want to scale artwork up, remove a background, or get a consistent stylized look. Vectorizing isn't the only route to those goals, especially for motion work where the final output is video.
This is where Styleframe, an AI video and motion tool built around artistic control, can sit alongside your vector workflow:
- Scaling up raster art: 4K Upscale increases resolution for production-ready output when a frame or still doesn't need to become paths.
- Isolating artwork: Remove Background gives you a clean cut-out of a drawing or character without manual masking.
- Moving illustrated looks onto footage or 3D: Restyle and Ink-and-Paint use reference images to drive style transfer, so a hand-drawn look from your Procreate work can inform how other material is rendered.
- Animating between drawn poses: Frames-to-Video is keyframe-driven, so you can supply start and end frames from your own illustrations and control the motion between them instead of leaving it to a one-click black box.
- Dimensional versions of flat art: 2D-to-3D and Turntable can extend an illustration into other viewpoints.
Everything is driven by your references, clips, and keyframes, and iteration is non-destructive. Output is image sequences, so it drops into compositing tools like any other render. Vector tracing remains the better choice when you need editable paths, cutting-machine files, or precise shape animation. Styleframe fits when the goal is a finished look in motion.
Common Mistakes to Avoid
- Tracing a low-resolution or compressed export. Jagged edges become jagged paths.
- Skipping the transparent background. The tracer will treat the canvas color as a shape.
- Using textured brushes for artwork you plan to vectorize. Expect broken, noisy paths.
- Tracing everything in one pass. Separating by layer or color gives you cleaner, more editable results.
- Never inspecting at high zoom. Flaws that vanish at normal size will show up once you scale or push in on a camera.
- Overlooking the original. Keep your Procreate file so you can re-export and re-trace whenever you need a cleaner pass.
Quick Workflow Summary
- Draw with smooth brushes in solid colors, with each color on its own layer.
- Export transparent PNGs (with registration marks for multi-layer work).
- Trace using Adobe Capture, Illustrator Image Trace, or Linearity Curve's Auto Trace.
- Clean up, simplify, and group the paths.
- Export SVG, AI, or PDF.
- Import into your motion software and convert to shapes when you need to animate.
Procreate will never output vectors on its own, but with disciplined source art and a good tracing pass, it can feed a very usable vector pipeline for motion work.