How to Make Procreate Pen Only
StyleFrame Team7 min read
To make Procreate pen only, open Actions (wrench) > Prefs > Gesture controls, then turn off touch-based actions so your finger stops triggering gestures. Check the Touch toggles under tabs like Smudge, Erase, and Assisted Drawing, and set Touch to do nothing for the tools you don't want a finger to control. If the real problem is that Procreate draws only straight lines or ignores your Apple Pencil, the cause is usually Drawing Assist, a layer marked "Assisted," a gesture or pressure setting, or a loose Pencil tip.
What "Procreate pen only" usually means
People search this phrase for three different problems, and the fix depends on which one you have:
- You want the Apple Pencil to draw and your finger or palm to do nothing. This is a gesture and touch setup problem.
- Procreate only draws straight lines with the Pencil. This is almost always Drawing Assist or stabilization.
- Procreate responds only to your finger, or only to the Pencil's taps on the interface, and won't draw with the Pencil. This is a device, gesture, or hardware problem.
The sections below cover each one. Menu labels shift slightly between Procreate versions, so if a toggle has a different name on your build, look for the closest match in the same panel.
Make Procreate respond only to Apple Pencil
Procreate doesn't need any pairing step inside the app. Once the Pencil is paired with your iPad, it works immediately. Restricting the canvas to Pencil input is a matter of reducing what touch is allowed to do.
Step 1: Open Gesture Controls
- Tap Actions (the wrench icon).
- Go to the Prefs tab.
- Tap Gesture controls.
This panel is where Procreate decides what a finger, a Pencil, or a double-tap does. Most "pen only" setups happen here.
Step 2: Disable touch actions
In the General section, look for any option that limits touch actions. Turning it on should cut down on accidental finger taps and multi-finger gestures when your hand rests on the iPad. The exact label may vary.
Step 3: Check the per-tool Touch toggles
Several tabs in Gesture controls have separate switches for Apple Pencil and Touch. These include:
- Smudge and Erase, which can be triggered by touch or by the Pencil.
- Assisted Drawing, which constrains strokes to a drawing guide.
For a strict pen-only setup, leave the Apple Pencil switch on where you want it and turn Touch off. Check each tab rather than assuming a global setting covers everything.
Step 4: Test how your setup handles your palm
Rest your hand on the screen, draw a few strokes with each brush, and look for stray marks. If you see them, revisit the touch toggles above.
Step 5: Set a useful double-tap
If you have a 2nd generation Apple Pencil, the double-tap shortcut can replace a lot of finger gestures. By default in iOS Settings it switches between the current tool and the eraser. You can change this in the Apple Pencil section of iOS Settings. Options include switching to the last used tool, showing the color palette, or turning it off.
You can also assign a double-tap action inside Procreate's Gesture Controls. Available options include:
- Toggle Drawing Assist
- Invoke Eyedropper
- Trigger QuickShape
- Invoke QuickMenu
- Toggle Full Screen
- Clear Layer
- Invoke Copy Paste menu
For a pen-first workflow, the eyedropper or QuickMenu on double-tap is a common choice. Avoid Clear Layer unless you like living dangerously.
Tune pressure so the Pencil feels right
A pen-only setup feels wrong if the Pencil's response is off. The Apple Pencil has a wide dynamic range, which means you may need to press quite hard to reach full pressure or opacity. If you draw lightly, the default curve can feel muted.
Open Actions > Prefs > Edit Pressure Curve and adjust the curve to match your touch. Raising or lowering the curve changes how much force is needed to reach full pressure. Each brush also has its own response settings in Brush Studio under the Apple Pencil tab, where size, opacity, and other properties can be tied to pressure and tilt. Some default brushes don't respond to pressure at all, so test with a few before blaming your hardware.
If Procreate only draws straight lines
This is a common "my pen only does X" complaint, and the fix is often Drawing Assist. Work through these in order.
Turn off Drawing Assist on the layer
- Open the Layers panel.
- Look for a layer labeled Assisted.
- Tap the layer thumbnail to open Layer Options.
- Tap Drawing Assist to toggle it off.
Drawing Assist can stay attached to a layer even after you've hidden the drawing guide, so strokes keep snapping to the guide's constraints.
Check Assisted Drawing in Gesture Controls
Go to Actions > Prefs > Gesture controls > Assisted Drawing. If Apple Pencil is toggled on there, turn it off, and turn Touch off too if it's on. These settings have no visible effect until you activate a drawing guide. Once you do, they can force your strokes to follow that guide, even after you turn the guide off in the Actions menu.
Check the canvas drawing guide
Open Actions > Canvas. If Drawing Guide is on, switch it off. You can also tap Edit Drawing Guide and turn off Assisted Drawing there.
Reset gesture controls
If the toggles are all correct and the behavior persists:
- Open a canvas.
- Tap Actions > Prefs.
- Tap Gesture controls > General > Reset to defaults.
- Confirm the reset.
This clears accidental changes, but it also removes any custom shortcuts, so note them first.
Reset pressure and smoothing
Global pressure and smoothing settings apply regardless of individual brush settings. If they are too aggressive, strokes feel locked or overly stabilized, almost like a straight-line tool.
- Tap Actions > Prefs.
- Tap Pressure and Smoothing.
- Tap Reset all at the bottom.
- Confirm.
If a brush still feels strangely rigid, check its own stabilization settings in Brush Studio. Maxed-out stabilization can mimic the straight-line effect.
If the Pencil won't draw at all
If the Pencil can select menus and tools but leaves no marks on the canvas, run through these checks.
- Check the Devices tab. In the Actions menu, make sure nothing unexpected is selected there. "None" is the expected setting.
- Check Advanced Gesture Controls. Make sure both Apple Pencil and Touch are set to the Selected Tool for painting, rather than reassigned to something else.
- Look for accidental eraser mode. A stray double-tap can switch the Pencil to the eraser. On a white canvas, you won't see any marks, which looks exactly like a dead Pencil. Watch the size slider for a change that signals the switch.
- Tighten the tip. A nib that has loosened slightly can cause erratic or missing strokes. Remove it, clear any dust, and screw it back on firmly.
- Re-pair the Pencil. Go to iPad Settings > Bluetooth, forget the Pencil, restart the iPad, and pair it again.
- Test pressure and tilt. A pressure or tilt fault can show up only in Procreate because it uses those inputs more heavily than most apps. As a test, drag the two end nodes of the pressure curve so the line runs flat across the top of the graph. If the Pencil then draws, you are likely dealing with a pressure sensing problem, and the Pencil may need to be tested by Apple or replaced under warranty.
- Check the brush's Apple Pencil settings. In Brush Studio, an Apple Pencil tab with unusual slope or tilt settings can suppress a brush's output.
Where a pen-only Procreate setup fits in a motion pipeline
Most motion designers and animators don't live in Procreate. It's where you sketch boards, paint style references, draw character poses, or ink key drawings before moving into After Effects, Blender, or Nuke. A clean pen-only setup matters because that stage is about decisive, accurate marks, and accidental gestures or locked strokes waste time.
Quick checklist
For a pen-only canvas:
- Prefs > Gesture controls: disable touch actions.
- Turn Touch off in the Smudge, Erase, and Assisted Drawing tabs.
- Set the Pencil double-tap to something you actually use.
- Adjust the pressure curve to your hand.
- Test palm rejection with real brush strokes.
For straight-line problems:
- Toggle off Drawing Assist on the layer marked Assisted.
- Turn off Apple Pencil and Touch in Assisted Drawing.
- Turn off the canvas Drawing Guide.
- Reset gesture controls, then pressure and smoothing.
For a Pencil that won't draw:
- Check for accidental eraser mode.
- Check Devices and Advanced Gesture Controls.
- Tighten the nib and re-pair the Pencil.
- Use the flat pressure curve test to isolate a pressure fault.
Work through the section that matches your symptom, change one setting at a time, and you'll find the cause quickly. After that, your Pencil can do what it's meant to do: make marks you control.