How to Make Procreate Lettering Brushes
StyleFrame Team8 min read
A Procreate lettering brush is built in Brush Studio: tap the brush icon, press the plus sign, pick a shape source (the nib footprint) and a grain source (texture, or blank for a solid line), then tune stabilization, taper, and Apple Pencil pressure until strokes swell and thin the way you want. For a brush-pen feel, use an oval or teardrop-like shape, a blank grain, moderate StreamLine, and pressure mapped to stroke size. For motion work, export the finished lettering with transparent backgrounds and separate layers, then animate or composite it in your motion software.
How Procreate Brushes Work
Every Procreate brush combines two ingredients. The shape is the stamp the brush repeats along your stroke, so it defines the character of the line. The grain is the texture that shows through that stamp. Most lettering brushes use a blank grain, because you want a clean, solid stroke you can texture later in compositing.
On top of those sit the behavior settings: how the stroke is smoothed, how its ends taper, and how Apple Pencil pressure changes size and opacity. Once you see a brush as a stamp plus behavior, building one stops being trial and error. You decide what the nib looks like, then what it does under pressure.
Build a Basic Lettering Brush Step by Step
This walkthrough makes a flexible brush-pen style brush, the most common starting point for expressive script.
1. Create and name the brush
Open the Brush Library, tap the plus icon in the top right, and Brush Studio opens with a blank brush. The new brush lands in whichever set you had selected, so open a custom set first if you want it organized from the start. Tap "Untitled Brush" and give it a name you'll recognize later, like "Brush Pen Soft."
2. Choose shape and grain
Tap the shape source and pick a stamp from the built-in library. An oval gives the classic brush-pen footprint, while circles suit monoline lettering. For the grain source, choose the blank option so the stroke stays solid, without texture.
3. Set stabilization
Open the Stabilization category and raise StreamLine. Higher values smooth wobble out of your strokes, which matters a lot for long script curves. But very high values make the line lag behind a fast hand and can drop parts of quick strokes. If you letter at speed, a range around 65–85% is usually safer than maxing it out. Keep Stabilization at a moderate level for now and revisit it once you test.
4. Add taper
The Taper category controls how pointed your stroke ends are. Leave everything at zero for round, blunt ends. For pointed entries and exits, adjust both pressure taper and touch taper, and drag the taper nodes along the preview stroke to control how quickly the line narrows. Pointed taper reads as "brush pen." Blunt ends read as "marker."
5. Map pressure to size
This is what makes thick downstrokes and hairline upstrokes possible. In the Apple Pencil settings, set size to respond to pressure. Then set a minimum size well below the maximum so there's real range between a light touch and a hard press. If the brush feels too sensitive or too stiff, adjust the pressure response curve rather than the size limits.
6. Test with real lettering
Don't judge a brush by a scribble. Write a few words, then compare upstrokes, downstrokes, loops, and connections. Look for kinks at stroke starts, strokes that stay too thick, and ends that cut off abruptly. Then tweak one setting at a time.
Create a Custom Shape for a Broad-Edge or Textured Brush
The built-in stamps cover monoline and brush pen styles. For broad-edge calligraphy, chisel-style lettering, or something with character, draw the shape yourself.
- Make a new square canvas. Brush shapes are square, so a square canvas keeps your drawing from distorting.
- Fill the background with black. In shape sources, black is empty and white is the stamp.
- Draw your nib shape in white. For a flat-edge brush, that's a thin angled rectangle. For a pointed brush, a teardrop or elongated oval.
- Select all, copy, then in Brush Studio tap the shape source and choose the option to import your drawing.
Because a flat nib is angled, it produces thick and thin strokes through direction rather than pressure. That's how broad-edge scripts work on paper. For this type of brush, you'll rely less on pressure sensitivity and more on the stamp's built-in angle.
Custom shapes are also where you get distinctive effects: halftone dots, woodcut-style cuts, chalk, braided or outlined strokes. Many shared lettering sets come from this approach, with creators drawing an unusual stamp and tuning spacing and jitter until it reads as lettering rather than a decorative border.
Match the Brush to the Lettering Style
"Calligraphy" is an umbrella term, and one brush will not do everything. A practical starter library has three tools:
- Monoline brush. Circle shape, no pressure variation, medium StreamLine. Good for clean titles, signage, and lettering you'll vectorize or animate as a stroke.
- Brush pen. Oval or teardrop shape, strong pressure-to-size response, tapered ends. Good for expressive modern script.
- Broad-edge brush. Angled flat stamp, little pressure dependence. Good for blackletter, italic, and similar structured hands.
Build them as separate brushes rather than one compromise. If a brush is nearly right, duplicate it before editing so you keep the original.
Save, Organize, and Share Your Brushes
Keep lettering brushes in a dedicated set so they aren't buried in the default library. Procreate brushes can be shared as files and moved between devices with AirDrop or the Files app. This is useful when you want a consistent brush kit across a team, or when you've built a brush for a specific project and need to hand it off. When distributing your own brushes, check any licensing terms on brushes you adapted, since some creators allow commercial use of artwork but not resale of the brush file itself.
Getting Procreate Lettering Into a Motion Pipeline
Lettering is only half the job if the deliverable moves. A few practices make the handoff to After Effects, Premiere Pro, or Nuke much smoother:
- Draw on separate layers. Put each word, or even each letter, on its own layer so you can stagger animation timing later. Export layers separately or as a layered file so they stay intact in your compositing app.
- Work large. Create the canvas at the final delivery resolution or higher. Raster lettering that's scaled up in comp softens quickly.
- Use transparent backgrounds. Hide the background layer and export with transparency so edges composite cleanly.
- Keep a clean version. Save one version without texture or color effects. Add grain, glow, and paper texture in comp, where you can adjust them non-destructively.
- Consider frame-by-frame. Redrawing lettering frame by frame, such as a boiling line or a write-on, can be exported as an image sequence and imported into your timeline.
For true write-on effects with smooth vector control, many artists trace Procreate lettering into paths and animate Trim Paths in After Effects. If you want the loose, imperfect hand-drawn feel intact, the raster approach with frame-by-frame redraws often looks better.
Where Styleframe Fits After the Brush Work
Once you have lettering you like, the next question is how to carry that look across moving footage or other frames. Styleframe is an AI video and motion tool built for artistic control rather than one-click output, and it's useful in a few specific places in a lettering workflow:
- Restyle and Ink-and-Paint. These reference-driven style transfer tools let you use your lettering frames, or illustrations that include your hand-drawn type, as the visual reference so footage picks up your line quality instead of a generic look.
- Frames-to-Video. Set keyframes, such as a rough lettering pose at the start and a finished layout at the end, and Styleframe generates the motion between them. Reference images and clips drive the result, so you aren't gambling on a prompt.
- Remove Background. Isolate lettering or a subject from a plate so it can sit cleanly in a composite.
- 2D-to-3D and Turntable. Turn a flat illustrated element into a 3D-style asset and rotate it, useful for hero lettering that needs depth.
- 4K Upscale. Bring generated or lower-resolution frames up to production-ready 4K before they go into your timeline.
Iteration is non-destructive, so you can try several style references against the same keyframes without losing earlier versions. Output exports as image sequences, which drop straight into After Effects or Nuke. Your compositing workflow stays where it is. Styleframe adds a controlled generation step in front of it.
Common Mistakes When Making Lettering Brushes
- Too much StreamLine. Heavy smoothing feels elegant in slow strokes and breaks down in fast ones.
- Narrow pressure range. If minimum and maximum size are close, the brush feels like a marker no matter how hard you press.
- Using texture too early. Grain makes strokes harder to edit and clean up. Add texture in a separate layer or in comp.
- Testing only with scribbles. Write real words and real connections.
- Editing the original. Duplicate before experimenting.
- Skipping the export check. Import one test word into After Effects early, before you commit to a whole project's worth of lettering, so you can catch resolution or edge problems.
Quick Checklist
- Open Brush Studio and name the brush.
- Pick an oval or circle shape, or paste a custom stamp from a square canvas.
- Set a blank grain for a clean stroke.
- Dial StreamLine to match your lettering speed.
- Add taper for pointed ends.
- Map Apple Pencil pressure to size with a real min/max gap.
- Test on actual words, adjust one setting at a time, and save variants.
- Export layered files with transparency for your motion pipeline.
Build three solid brushes before you build thirty. A reliable monoline, brush pen, and broad-edge tool will cover most lettering you need to hand off to motion.