How to Make Procreate Layer Symmetrical
StyleFrame Team8 min read
In Procreate, go to Actions → Canvas, turn on Drawing Guide, tap Edit Drawing Guide, and choose Symmetry. Then open the Layers panel, tap the layer, and switch on Drawing Assist. Without that layer-level setting, strokes on the layer won't mirror even when the guide is visible. Symmetry only affects new strokes, so to make artwork you've already drawn symmetrical, duplicate the layer and flip the copy with the Transform tool.
Step 1: Turn On the Symmetry Guide
- Tap the wrench (Actions) and open the Canvas tab.
- Switch on Drawing Guide. A grid will appear.
- Tap Edit Drawing Guide.
- Along the bottom, choose Symmetry (the other options are 2D Grid, Isometric, and Perspective).
- Tap Done.
A vertical guideline appears down the middle of the canvas. Anything you draw on one side is reproduced on the other in real time.
In Procreate Pocket, the path is slightly different. Expand the top toolbar with the ellipsis, go to Actions → Canvas, and tap Symmetry. To adjust it, tap Edit Drawing Guides. The settings sit in a condensed panel at the bottom of the screen, and you drag the grey handle upward to expand them. You confirm with the blue tick instead of Done.
Step 2: Enable Drawing Assist on the Layer
This is the step that trips people up. The symmetry guide is a canvas-level overlay, but the mirroring only applies to layers that have Drawing Assist active. A new layer you add after setting up the guide may not mirror anything.
To fix it:
- Open the Layers panel.
- Tap the layer you want to draw on.
- Choose Drawing Assist from the menu.
The layer will now show "Assisted" beneath its name. Layers without that label won't reproduce your strokes. In Pocket, the equivalent is the Assisted Drawing toggle in the Drawing Guide settings. Paint, smudge, and erase strokes are only applied symmetrically when it's on.
The same setting also explains the opposite problem. If strokes are being mirrored when you think the guide is off, check whether Drawing Assist is still active on that layer.
Step 3: Pick the Right Symmetry Type
Procreate offers four modes. Open Edit Drawing Guide, tap the options under Symmetry, and choose one.
- Vertical: a line down the center. Left and right mirror each other. This is the default and the best fit for faces, characters, logos, and emblems.
- Horizontal: a line across the middle. Top and bottom mirror each other, which suits reflections and water.
- Quadrant: vertical and horizontal guides together. A stroke in one quadrant repeats in all four, which is useful for tiles, frames, and ornamental borders.
- Radial: the canvas splits into eight segments using horizontal, vertical, and diagonal lines. This works well for mandalas, snowflakes, and kaleidoscopic patterns.
Step 4: Choose Mirror or Rotational Behavior
New symmetry guides use Mirror symmetry. Strokes are reflected across the line, as if a mirror were standing on it.
Switching on the Rotational Symmetry toggle changes this. The stroke is reflected and rotated, so the copy is flipped both horizontally and vertically at once. Draw a curve in the top-left and the copy appears rotated into the bottom-right, not reflected into the top-right.
Mirror suits anything with a left-right identity, like a face. Rotational suits pinwheel-style motifs, spinning emblems, and loop-friendly patterns. Toggle it a few times with a scribble stroke to see the difference before committing to a drawing.
Step 5: Move and Rotate the Axis
By default the guide runs through the exact center, but you can reposition it.
- Drag the blue node to move the whole guide across the canvas.
- Drag the green node to rotate the guide lines. This gives you mirrored results at an angle.
- Tap either node, then Reset, to return the guide to its default position.
You can also change the guide's color, opacity, and thickness using the controls in the Drawing Guides screen. One small gotcha: if you drop the opacity to zero or pick white, the line effectively disappears. Symmetry is still active, but you can't see it, which looks like a bug. Keep a visible color selected while you work.
For motion work, an off-center axis is useful. If you plan to animate a character's head turn or build a pattern that will be offset in After Effects, you can place the axis exactly where you need it.
Making an Existing Layer Symmetrical
Symmetry guides only act on new strokes. They won't retroactively mirror what's already on a layer. If you already have art and want it symmetrical, use a manual approach:
- Decide which half is the keeper. Pick the side you like better.
- Remove the other half. Use the Selection tool to select the half to discard and clear it, or erase it.
- Duplicate the layer.
- Flip the copy. With the duplicate selected, open the Transform tool and choose Flip Horizontal (or Flip Vertical for a top-bottom mirror).
- Align the halves. Position the flipped half so it lands exactly on the axis, with no gap or overlap.
- Merge down. Combine the two layers if you want a single symmetrical layer.
Keep the original half and the flipped copy on separate layers until you're sure everything is correct. Merging is destructive, and seams along the axis are easier to fix while the halves are separate.
Another option is to redraw over the existing art on a new layer with symmetry and Drawing Assist enabled. This is slower, but it gives you a clean, native symmetrical drawing, and it works better if you want the hand-drawn variation to remain organic.
Troubleshooting: Why Isn't My Layer Mirroring?
Work through these checks in order:
- Is Drawing Guide on? Check Actions → Canvas.
- Is Symmetry the selected guide type? It's easy to be on 2D Grid by accident.
- Does the layer say "Assisted"? If not, tap the layer and enable Drawing Assist.
- Is the guide visible? If the color is white or opacity is zero, you may be drawing against an invisible guide.
- Are you drawing across the axis? Mirror mode reproduces strokes across the line, so a stroke that crosses the line will behave differently than you expect.
- Is the correct mode active? Check Mirror vs. Rotational, and vertical vs. horizontal.
- Are you using a tool that supports it? Paint, smudge, and erase strokes follow the guide.
Getting Symmetrical Procreate Work Into a Motion Pipeline
If you're a motion designer, Procreate symmetry is often a starting point and not the final product. Symmetrical characters, mandalas, and pattern elements typically get exported, then rigged, layered, and animated elsewhere.
A few habits make that handoff cleaner:
- Keep symmetrical elements on separate layers. Eyes, ornaments, and decorative rings are easier to animate independently if they weren't flattened.
- Name layers before export. Clear names save time later.
- Check the axis alignment. If you used an angled or offset guide, note where it sat so you can match the anchor point in your compositing tool.
- Work at a resolution that survives scaling. If the piece will be pushed in or reframed in a comp, start with a canvas big enough for it.
Once the art is in After Effects, symmetry becomes a compositing question. You can duplicate a layer, flip it with a negative scale, and parent both halves to a null. That lets you animate a mirrored rig from one set of keyframes.
Where Styleframe Fits After the Drawing Is Done
Procreate handles the drawing. Once you have a clean symmetrical frame, the next problem is often turning stills into motion without losing the design. is an AI video and motion tool built for artists who want control over the result, not a one-click black box.
You might bring a Procreate piece into Styleframe in a few ways:
- Frames-to-Video: use keyframes, such as a symmetrical start pose and an end pose, to drive a generated sequence between them.
- Restyle and Ink-and-Paint: apply a reference-driven style transfer so footage or renders pick up the look of your Procreate artwork.
- 2D-to-3D and Turntable: extend a flat symmetrical design into a rotating view for reviews or concept presentations.
- Remove Background: isolate the subject.
Every generation is guided by your reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without overwriting earlier versions. Styleframe doesn't replace Procreate's symmetry tools or your comp. It sits between them as a way to extend the drawing into motion.
Quick Reference
Final Thoughts
Making a Procreate layer symmetrical comes down to two separate switches: the canvas-level Symmetry guide and the layer-level Drawing Assist setting. Many "symmetry isn't working" problems come from the second one. For new drawing, set up the guide, check that the layer is assisted, and pick the mode that fits your design. For existing artwork, use duplicate-and-flip so you get precise alignment and keep control over the halves. From there, keep your layers organized so the work moves into After Effects or your next tool without rework.