How to Make Procreate Canvas Less Pixelated
StyleFrame Team7 min read
The most common cause of a pixelated Procreate canvas is not enough pixels, so create a larger canvas, ideally 3000 × 3000 px or more for line art, and set the Transform tool's interpolation to Bilinear or Bicubic. DPI is only print metadata, so raising it on a fixed pixel canvas changes nothing. Draw at the final size, avoid scaling layers up, use clean inking brushes, and export PNG or TIFF instead of JPEG. Procreate is raster software, so you will always see pixels if you zoom far enough, and the goal is to push that point past any size you'll actually deliver.
Why Procreate canvases look pixelated
Procreate stores every stroke as pixels on a fixed grid. Three things determine how sharp a line looks:
- Pixel dimensions of the canvas. This is the only number that matters on screen.
- How far the artwork is magnified. Zooming in, scaling a layer, or stretching an export to a larger frame all spread the same pixels over more screen area.
- How many times pixels have been resampled. Every resize, rotate, or warp recalculates pixel values and can soften edges.
A common example is a 1704 × 1900 px canvas at "300 DPI." An iPad Pro's screen is 2732 × 2048 px, so a canvas that size is already shown above 100% when it fills the screen. Zooming in to ink fine lines makes it worse. The DPI label did not help because it never added pixels.
Fix 1: Set canvas size in pixels, not DPI
DPI tells a printer how many pixels to place per inch. It does not create detail on a screen or in a video timeline. The pixel math is simple:
- 10 × 10 in at 300 DPI = 3000 × 3000 px
- 5 × 5 in at 300 DPI = 1500 × 1500 px
Both are "300 DPI," but one has four times the pixels. A canvas created in pixels keeps the same count when you change the DPI value. Only the implied print size changes.
Practical targets:
- Line art and inking: start around 3000 × 3000 px and go larger for fine detail. Some illustrators work at 600 DPI or higher for ink-style lines on print-sized canvases.
- Print work: build at the final physical size at 300 DPI, for example A3 or A2 for posters.
- Motion and video work: make the canvas at least your delivery resolution, and larger if you will push in, pan, or scale in the comp (more on that below).
If you plan to scan traditional ink, scan at a much higher resolution than you think you need. You can downsample later, but you can't recover detail you never captured.
Fix 2: Plan for the layer-count tradeoff
Larger canvases reduce the number of layers Procreate allows, and the limit varies by iPad model and app version. Artists regularly report getting only 7 to 11 layers at A3-class sizes, while others report getting more depending on their iPad.
Ways to work within the limit:
- Merge finished groups of layers once you are happy with them.
- Keep rough construction on one or two layers, then ink on a clean layer.
- Duplicate the file before heavy merging so you keep a layered master.
A somewhat smaller canvas with more layers can be a better call than the largest canvas your device supports. Pick a size based on the maximum magnification the work will see.
Fix 3: Stop degrading lines with transforms
Every time you scale, rotate, or warp a layer, Procreate resamples its pixels. Scaling up cannot add real detail. It can only stretch what exists. Do it repeatedly and fine lines soften.
What to do:
- Change the interpolation setting. Select the Transform tool and, in the bottom toolbar, change Interpolation from Nearest Neighbor to Bilinear or Bicubic. Nearest Neighbor tends to produce jagged edges on resized lines, while the other two smooth them.
- Transform the rough, not the final. Keep drafts and layout on a separate layer. Adjust size and position freely there, lower its opacity, then ink on a new layer and avoid transforming that layer afterward.
- Don't scale up. If a drawing is too small for its final use, redraw or retrace the lines at the correct size. Some artists resize a draft and retrace over it for exactly this reason.
- Imported images follow the same rules. A sticker or graphic dropped into a canvas will look pixelated if its native resolution is lower than the size you scale it to.
Fix 4: Use brushes that produce clean edges
Some brushes are built to look textured, and grain or rough edges can read as pixelation. For crisp outlines, stick with inking brushes such as Studio Pen or Technical Pen. Monoline-style brushes are also good for checking whether your canvas size is the problem: if a clean brush looks stepped at your working zoom, the canvas is too small.
Also check that you are not confusing intentional softness with a resolution problem. Low-opacity strokes, scanning artifacts, and textured brushes all affect the look of a line, so test with a hard, opaque brush before changing canvas settings.
Fix 5: Export with the right format
Even a well-built canvas can look worse after export.
- Use PNG or TIFF for line art. JPEG compression blurs fine details and creates artifacts around thin lines.
- Export at native size. Don't resize in a social app or a document tool that re-compresses the file.
- Use PSD when you need layers. This is handy if you plan to separate line art, color, and shadows for compositing.
- Check the preview at 100%. Judge sharpness at 1:1, not in a downsized thumbnail.
Fix 6: Set up Procreate art for motion and compositing
Motion work adds a second place for pixelation to appear: the comp. A Procreate illustration might look fine on the iPad and soften in After Effects or Premiere Pro because of how it is scaled there.
Build to the move, not just the frame. If a 1920 × 1080 comp includes a 150% push-in, the artwork needs enough pixels to still be at or above 100% scale at the end of the move. In practice, that means painting at 2× or more your delivery resolution for any shot with camera moves.
Keep layer scale at or below 100%. In After Effects, check the Scale value on imported layers. Scaling a raster layer above 100% makes it softer. If you need to enlarge an asset, do it deliberately and compare the result against redrawing it.
Separate elements for parallax. Export characters, backgrounds, and foreground pieces as separate PNGs or PSD layers. This lets you scale and move each piece individually without enlarging the whole illustration.
Mind premultiplication and edges. Fringing around thin lines on transparent PNGs can look like pixelation. Check how your compositing software interprets the alpha channel and your matte handling if you see halos.
Be careful with Nuke and 3D tools. If you bring Procreate art into Nuke, Cinema 4D, or Blender as textures or cards, check texture filtering and mipmapping, and make sure the source resolution matches the camera's closest approach to the surface. A texture that looks fine from far away can break up when the camera gets close.
Quick checklist
- Create the canvas in pixels. Use at least 3000 × 3000 px for line art and more for large prints or camera moves.
- Ignore DPI as a quality control. Use it only to set print size.
- Set Transform interpolation to Bilinear or Bicubic.
- Don't scale final line art. Redraw or retrace if you must change size.
- Use Studio Pen, Technical Pen, or another clean inking brush.
- Export PNG, TIFF, or PSD, never JPEG, for line work.
- In After Effects or Premiere Pro, keep imported layers at or below 100% scale at the end of every move.
- Check the result at 100%, not in a thumbnail.
If you only change one thing, make it the canvas size. More pixels at the start gives every later step, from transforms to export to compositing, more room before the edges break down.