How to Make Procreate Brushes Bigger
StyleFrame Team9 min read
In Procreate, open the brush in the Brush Library to enter Brush Studio, go to Properties, and drag the Maximum Size slider to the right. The brush's size slider in the sidebar is a percentage of that ceiling, so raising it makes 100% bigger. If the slider seems to have no effect, check the Spacing value on the Stroke Path tab, because on some brushes and Procreate versions a very low spacing limits how large the brush can go. Duplicate the brush before you change anything so an app update doesn't overwrite your edit.
Raise the maximum size in Brush Studio
This is often the fix for "my brush is too small" problems.
- Open the Brush Library and find the brush you want to enlarge.
- Swipe left on it and tap Duplicate. The copy appears with a number next to its name.
- Tap the duplicate to open Brush Studio.
- Open the Properties tab.
- Under Brush Behavior, drag the Maximum Size slider to the right.
- Tap Done and test a stroke on your canvas.
Make the change gradually. If you push the slider to its limit, the brush may be unwieldy at the low end, because the sidebar slider is now spread across a much wider range. You'll find it harder to hit small sizes precisely. Raise the ceiling just far enough to cover what you need, then fine-tune.
If your Procreate version lays out the Properties tab differently, look for the size-related sliders in that tab. The Maximum Size control is the second slider down.
Why your brush still feels small on a large canvas
Sometimes the brush isn't capped at all. It just looks small relative to your canvas.
A brush size is expressed in pixels, and the sidebar percentage maps to that pixel range. The same 100% stroke covers a much larger share of a 1000 px square canvas than it does of a 3000 px or 4000 px canvas. If you move from a small test document to a large working document, the same brush will feel noticeably smaller. Textured brushes show another side of this: on a bigger canvas, grain and speckle become less visible at identical percentages, so the stroke looks thinner and cleaner than it did in your test.
This matters for anyone building backgrounds or textures at video resolutions. A 3840×2160 canvas, or a larger one you plan to scale down, will make default brushes feel undersized. The brush isn't broken. It was tuned for a smaller working area.
If that describes your situation, there are two options:
- Raise Maximum Size on a duplicate, as above, and use that duplicate for large-canvas work.
- Work at a smaller canvas size if the final output doesn't require the resolution, and scale up later with a proper upscaling step.
Check spacing if the size limit won't budge
Procreate's stock brushes don't all share the same ceiling. In the airbrush set, for example, a hard blend brush can reach a bigger maximum than a hard airbrush at default settings, and the difference traces back to the Stroke Path tab. In many versions of Procreate, a higher Spacing value allowed a larger maximum size. A brush with spacing at a very low value could be stuck at a smaller ceiling, even when its Maximum Size slider looked fully extended.
Here is how to check:
- In your duplicated brush, open the Stroke Path tab.
- Find Spacing and raise it modestly. Community advice has pointed to values around 8–12% as enough to unlock larger sizes on some brushes, though results vary by brush.
- Return to Properties and see whether Maximum Size can now go higher.
- Draw a test stroke. If the stroke looks beaded or stamped, lower the spacing a little until it's smooth again.
There's a caveat: more recent versions of Procreate appear to treat spacing and maximum size as independent controls. If the Maximum Size slider on Properties already does what you need, leave spacing alone. Change it only when the size ceiling seems stuck, and always test the result, since spacing also changes how a stroke looks. High spacing on a soft brush can make a continuous stroke look like a trail of dots.
Duplicate first, always
Stock brush edits aren't safe. When Procreate updates, edits to built-in brushes can be reset to their defaults, so a customized stock brush may quietly revert. A duplicated brush is separate from the original and persists through updates.
A few habits help:
- Duplicate before every edit, even small ones.
- Rename the duplicate, such as "Hard Airbrush XL", so you can find it in a crowded library.
- Keep custom brushes in their own set.
- Export brushes or sets you rely on so you have a backup if you ever need to reinstall the app.
For anyone working to deadlines, a backed-up brush set removes one source of surprises when you move between iPads or start a new project.
Adjust grain and other settings for textured brushes
If you enlarge a textured brush, the stroke gets bigger but the texture may not scale with it. That can leave a wide, bland stroke with tiny grain, which looks different from the brush you picked.
Open the brush's Grain settings in Brush Studio and adjust the grain scale to match the larger stroke. It's worth testing at both small and large sizes, since grain behavior depends on whether it moves with the stroke or stays fixed to the canvas. Check a few strokes at the new maximum size and compare them with the original brush. The goal is to make the enlarged version feel like the same tool, only bigger.
Other settings that can change how a larger brush feels:
- Size dynamics (Apple Pencil pressure and speed response) can make a big brush hard to control if the range is wide. Reduce the range if strokes swing between thin and huge.
- Opacity and flow matter more at scale, because large strokes overlap more and build up faster.
- Shape settings such as scatter and rotation can look chaotic at very large sizes. Dial them back if the stroke starts to look noisy.
When a bigger brush isn't the right tool
Sometimes the better answer is to avoid a huge brush entirely.
- Large soft gradients: Fill a selection with color and apply a Gaussian blur from the Adjustments menu. It's often smoother than a large airbrush stroke and easier to correct.
- Flat backgrounds: Use a color fill rather than painting the area in strokes.
- Big textured areas: Paint at a moderate brush size and let the texture of a layer, rather than the brush, carry the feel. Texture layers can be scaled with the Transform tool.
- Broad shapes: Use selection tools to define the area, then fill.
These approaches also keep your layers cleaner. Large stroke-built areas are hard to revise, while a selection fill or blurred layer is easy to adjust.
Taking big Procreate canvases into a motion pipeline
Many motion designers and animators use Procreate to paint style frames, backgrounds, textures, and key poses, then bring that work into After Effects, Cinema 4D, Blender, or Nuke. That's where the large-canvas problem becomes practical. If your background needs to survive a camera move or a 4K delivery, you'll be working with big canvases, and big brushes to match.
A couple of workflow notes:
- Set your canvas size to the delivery needs up front. Changing it later forces rework.
- Keep painted elements on separate layers and export them in a format your compositing app handles well, so you can move, blur, and relight them in After Effects or Nuke.
- Name your duplicated brushes consistently across projects, so the whole team can reproduce a look.
If you want to extend a painted frame into motion, is built for that step with artistic control rather than a one-click black box. You can use your Procreate paintings as keyframes in Frames-to-Video, so the generation follows frames you drew rather than inventing its own. You can also use a painted frame as a style reference in Restyle or Ink-and-Paint, which transfer a look onto video or footage. Other tools in the set include 2D-to-3D, Turntable, Remove Background, and 4K Upscale. Every generation is driven by reference images, clips, and keyframes, iteration is non-destructive, and output is production-ready 4K.
Styleframe exports image sequences, so the results drop into an existing After Effects or Nuke comp, and an After Effects plugin is on the way. The painting stays in Procreate, the compositing stays in your usual tools, and Styleframe handles the motion in between.
Quick troubleshooting checklist
If your Procreate brush is still too small, run through these in order:
- Duplicate the brush so edits are safe.
- Raise Maximum Size in Properties.
- Check canvas size. A large canvas makes every brush look smaller.
- Raise Spacing slightly on the Stroke Path tab if the ceiling won't move, then test for beading.
- Adjust grain scale if the texture looks too fine at the new size.
- Review size dynamics if strokes are hard to control.
- Consider a fill, selection, or blur instead of one giant stroke.
FAQ
Why does my brush reach 100% but still look small? The percentage is relative to the brush's maximum size, and the maximum is in pixels. On a large canvas, even the full size covers a small part of the area. Raise the maximum on a duplicate.
Does changing spacing make the brush bigger? On some brushes and older versions, a higher spacing value allowed a larger maximum size. In newer versions the two settings appear to work independently, so try the Maximum Size slider first.
Will my edited brush survive a Procreate update? Edits to stock brushes may be reset. Duplicates are kept, so duplicate before editing and back up brushes you depend on.
Is there a limit to how big a brush can go? Each brush has its own ceiling, which is why some stock brushes can go much larger than others at default settings. Adjusting Maximum Size, and spacing where needed, raises it for that brush.