How to Make Plaid Pattern in Procreate
StyleFrame Team7 min read
To make a plaid pattern in Procreate, create a square canvas, turn on the 2D Grid drawing guide with Drawing Assist, and draw evenly spaced horizontal stripes in two or three colors with a monoline brush. Duplicate the layer, rotate it 90 degrees, and set the top layer's blend mode to Multiply so the overlaps create the woven plaid tones. Then merge the layers, duplicate the result four times, and shrink the copies into the canvas corners to check that the repeat is seamless. For production work, export the tile as a PNG and repeat it in your compositing or 3D software.
What You Need Before You Start
You don't need much:
- Procreate on iPad, ideally with an Apple Pencil
- A square canvas. 3000 × 3000 px is a common choice, but go larger if the plaid will fill a 4K frame or sit close to camera on a 3D model
- A monoline brush with no texture and no pressure-based width variation. Procreate's native Monoline brush works if you enlarge it
- A palette of two to four related colors
The brush matters more than it seems. A textured or variable-width brush makes stripes look different at the top and bottom edges of the tile, and that mismatch shows up as visible seams once the pattern repeats.
Step 1: Set Up the Canvas and Drawing Guide
- Create a new square canvas.
- Open Actions (wrench) → Canvas and switch on Drawing Guide.
- Tap Edit Drawing Guide and set the grid size. Around 150 px on a 3000 px canvas gives you 20 even divisions, which is easy to work with.
- Make sure the guide is the 2D Grid.
The grid gives you a visual rhythm for spacing stripes. You can plaid without it, but it speeds up consistent spacing.
Step 2: Draw the First Set of Stripes
Create a new layer and pick your lightest stripe color. Using the monoline brush, draw straight lines across the canvas.
For perfectly straight lines you have two options:
- QuickLine: draw a line and hold at the end so Procreate snaps it straight. It's quick but not always perfectly horizontal.
- Drawing Assist: tap the layer, choose Drawing Assist, and your strokes lock to the grid. This is more reliable. You can turn the guide itself off afterward and the layer keeps its assist behavior.
Alternate between two tones of the same hue, such as a light pink and a mid pink. Spacing doesn't need to be uniform. Varied spacing is what makes a plaid look designed instead of mechanical. What does need to be uniform is straightness and edge-to-edge coverage.
Keep Stripes Off the Tile Edges
Here's the part many tutorials gloss over. When you later tile this canvas, the left edge sits against the right edge. If a stripe touches the edge on one side but not the other, it will appear cut off or doubled. Two ways to handle it:
- Keep all stripes fully inside the canvas with margin on both sides, or
- If a stripe straddles an edge, make sure the other side has an exactly matching half-width stripe in the same color.
Full-width horizontal lines wrap fine vertically because they run edge to edge. It's the stripe position relative to the top and bottom edges that needs attention.
Step 3: Duplicate, Rotate, and Multiply
This is the step that turns stripes into plaid.
- Swipe left on your stripe layer and tap Duplicate.
- With the duplicate selected, use Transform and rotate it 90 degrees.
- Change the duplicate's blend mode from Normal to Multiply.
Where the horizontal and vertical stripes cross, the colors multiply into darker blended tones. That's the woven look of a real plaid or tartan, produced without painting each intersection by hand.
A Note on Backgrounds
Multiply works best on a light background. On a dark background, Multiply barely shifts the color, so lean on layer opacity instead. Lower the opacity of each stripe layer and the overlaps will still read as darker or lighter.
You can also add a third and fourth layer with thinner accent lines, such as a narrow white or navy pinstripe, using the same duplicate-and-rotate approach. Erase finer lines on one layer if they crowd the main bands.
Step 4: Merge and Test the Repeat
Merge the two stripe layers into one. Before you do, consider hiding or duplicating the originals so you can come back and edit if something looks off.
To test for seams:
- Duplicate the merged layer until you have four copies.
- For each copy, open Transform, turn on Snapping and Magnetics, and shrink it to half size (for a 3000 px canvas, 1500 × 1500 px).
- Place one copy in each corner: top-left, top-right, bottom-left, bottom-right.
You now see the tile repeated 2 × 2. Look for hairlines, doubled stripes, or color shifts where copies meet. If the seams look clean, the repeat is good. You can then copy-all, paste, and shrink again to simulate even smaller scale and see how the plaid reads from a distance.
If you spot a seam, hide the four copies, fix the original at the offending edge, and re-run the test.
Variations Worth Trying
- Gingham: Use just one stripe color at reduced opacity in both directions. The crossing creates three tones: light, medium, and dark. The same Multiply logic applies.
- Tartan/twill look: Add a second set of narrower stripes in a contrasting color and offset them from the main bands. Real tartan follows a specific thread count (a "sett"), but for illustration work, approximating it visually is fine.
- Diagonal plaid: Rotate the finished merged tile 45 degrees in a larger canvas. Note that this breaks the seamless repeat unless you re-crop carefully, so build the diagonal in a canvas sized so the rotated pattern still tiles, or rebuild the tile using diagonal-aware spacing.
- Texture overlay: Place a fabric or paper texture above the plaid in Multiply or Overlay to soften the digital crispness. Apply it after you've verified the seams, and make sure the texture is itself seamless.
Common Mistakes
- Using a textured brush. Texture rarely wraps cleanly at the edges.
- Drawing freehand. Even small angle errors compound once the pattern repeats.
- Skipping the seam test. Plaid has strong horizontal and vertical lines, so any misalignment is obvious.
- Wrong canvas size for the output. Plaid on a 3D character's jacket needs far more resolution than plaid on a flat background card.
- Flattening too early. Keep your stripe layers separate until you're sure about colors, since recoloring a flattened plaid is painful.
Taking the Plaid Into a Motion Pipeline
Procreate is a good place to design the pattern, but the tile usually ends up elsewhere. A few practical handoffs:
Export. Share the canvas as PNG for lossless color. Export a version without the seam-test layout, meaning the single full tile, not the 2 × 2 grid.
Compositing and 3D tools. Most compositing and 3D applications can repeat an image tile, either through a tiling effect or through texture and UV scale controls. Check your tool's documentation for the exact settings. Avoid mirrored repeats, since they will change the plaid, and use a higher-resolution tile if the camera gets near the surface.
Quick Checklist
- Square canvas, large enough for the final use
- Textureless monoline brush
- 2D Grid and Drawing Assist for straight lines
- Stripes kept away from edges, or matched on both sides
- Duplicate, rotate 90°, Multiply
- 2 × 2 seam test before export
- PNG export of the single tile
- A tiling or UV-repeat setting in your animation or 3D software
Once the tile is clean, the plaid is a reusable asset. Keep the layered Procreate file, since changing a color palette later takes seconds when the stripe layers are still separate.