How to Make Pigs Procreate
StyleFrame Team8 min read
To make a pig in Procreate, start with an egg-shaped body, add a rounded snout, four curved legs, ears, and a curly tail, then refine the sketch on a new layer and color each part on its own layer. Keep the pieces separate so the pig can be animated later. Export the file as a layered PSD and import it into After Effects, where each part becomes its own layer you can rig and keyframe.
What "How to Make Pigs Procreate" Usually Means
The phrase is most often a search for pigs drawn in Procreate, the iPad illustration app. If you meant livestock breeding, this isn't that guide. A veterinarian or agricultural extension office is the right source for that.
For motion designers, a Procreate pig is usually a character asset: a hero illustration, a storyboard frame, or a puppet to animate. This guide covers building one that survives the trip into a motion pipeline.
Set Up the Canvas for Animation
Decisions you make before the first stroke affect everything downstream.
- Canvas size and DPI: A square canvas around 10 x 10 inches at 300 DPI is a comfortable starting point for a detailed illustration. Procreate limits the layer count based on canvas size, so a bigger canvas means fewer layers. If you run out, lower the DPI.
- Color profile: Stick with RGB. Pick the profile that matches your After Effects project so colors don't shift on import.
- Resolution for delivery: If the pig will be scaled up or pushed in on, draw at a size that holds up at your final frame size. Rebuilding an asset at higher resolution later is painful.
- Palette: Build or download a limited palette first. A pastel set keeps the pig consistent across scenes and makes later color adjustments easier.
Think about layer budget early. A character meant for animation needs more layers than a flat illustration, and about 15 is a realistic target for a simple pig.
Build the Pig From Simple Shapes
Draw loosely first, then commit.
Rough sketch
- Pick a plain pencil brush and a light color, such as pale blue. Light construction lines are easy to separate from your final linework.
- Draw an egg shape for the body, with the narrow end toward the front.
- Attach a short, rounded rectangle to the narrow end for the snout. Soften the corner where it meets the body.
- Add two legs on the near side, curving slightly. The hind leg should connect to the back of the body.
- Add two legs on the far side, curving in the opposite direction. This gives the pose depth.
- Add a triangular or leaf-shaped ear and a curly tail.
Refine on a new layer
Create a new layer above the sketch and trace over it with a darker color, correcting wobbly edges as you go. Procreate's undo arrow and two-finger canvas rotation help here. Rotate the canvas so each stroke follows the natural motion of your wrist.
When the linework is done, hide or delete the sketch layer.
Separate the Parts on Their Own Layers
This is the step that makes a pig animatable. A flat illustration can only be moved as one piece, while a layered one can be rigged.
Put these on separate layers at minimum:
- Body
- Near legs (one layer each if you want walking motion)
- Far legs, ideally on their own layer so you can tuck them behind the body
- Head and snout
- Near ear and far ear
- Tail
- Eyes (so you can blink)
- Mouth, if you plan to animate expressions
Where one part overlaps another, such as a leg sitting over the belly, extend the hidden portion of the bottom shape. If you only paint what's visible, rotating a leg in After Effects reveals a gap. Overpaint the hidden edges so there's content to reveal.
Name your layers in Procreate. Layers called "Layer 14" become a mess in a PSD import.
Add Color, Texture, and Mud
Flat color is fine for motion graphics, but a textured pig reads as crafted.
- Base colors: Fill each part with a peachy pink, using a slightly deeper, more saturated pink for the near-side ear to separate it from the body.
- Details: On a new layer, draw the snout nostrils and eyes in dark brown, not pure black. The softer contrast looks warmer.
- Clipping masks: Put shading and texture layers above the base shapes and set them as clipping masks. The texture then stays inside the shape's edges no matter how you paint.
- Mud and dirt: With a pastel or grainy brush in dark brown, use light pressure for a dusting on the underside of the belly. Press harder where you want denser texture, and add a second brown for variety. Darken the far legs a bit to push them back.
- Background elements: Keep clouds, ground, and props on their own layers. A Gaussian blur on a cloud layer makes it wispy and keeps attention on the pig.
Clipping masks do a lot of work for animators. Because texture is attached to its base layer, you can move or rotate a part in After Effects and the shading travels with it.
Get the Pig Into a Motion Pipeline
Export
Export a layered PSD from Procreate. You can also export individual layers as transparent PNGs if your rig is built elsewhere. Check that no important layers are hidden and that layer names are clean.
After Effects
Import the PSD as a composition so each Procreate layer becomes an After Effects layer with its position intact. From there:
- Parent the legs, ears, and tail to the body with the pick whip.
- Set anchor points at the joints, such as the hip for a leg or the base of the tail, before you animate rotation.
- Use the Puppet Pin tool for soft deformation in the snout, ears, and tail.
- Add a simple bounce, a squash-and-stretch on the body, and a delayed tail follow-through.
Other tools
- Premiere Pro: Drop in finished renders or the PSD as a still, but animate elsewhere.
- Blender and Cinema 4D: Load layers as image planes for a layered 2.5D scene with parallax. Offset the planes in depth and move the camera for a papercraft look.
- Nuke: Bring in PNG sequences with alpha for compositing, grading, and matching a pig to live-action plates.
Where Styleframe Fits in a Pig Workflow
Procreate gives you a precise, hand-drawn asset. Styleframe is an AI video and motion tool built for professional artistic control, and it handles the stretch between a finished illustration and finished footage. Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you steer the result rather than rolling dice on a prompt.
Practical uses for a Procreate pig:
- Frames-to-Video: Draw the pig in two poses, such as standing and mid-hop. Use them as keyframes and generate the motion between them. You keep authorship of the poses, and the tool works out the in-between.
- Restyle and Ink-and-Paint: These are reference-driven style transfer. Use your pastel pig as the style reference and apply that look to other footage or frames, so a 3D render or a live plate picks up your illustration's texture.
- 2D-to-3D and Turntable: Convert the flat pig into a 3D-style form and generate a turntable view. This is useful for checking how the design reads from other angles before you commit to modeling.
- Remove Background: Isolate the pig from a painted backdrop or a generated frame, so you can drop it on a new scene.
- 4K Upscale: Bring finished frames to production-ready 4K delivery resolution.
Styleframe exports image sequences, so output slots into the same After Effects or Nuke comps you already use. Your compositing, color, and finishing stay where they are. It adds no replacement for the Procreate step: the pig's design is still yours, and Styleframe extends it into motion.
As with any generative tool, results depend on the quality of your references and keyframes, so expect to iterate. Clean, well-separated source art and clear keyframes give the best starting point.
Common Mistakes to Avoid
- Painting everything on one layer. You can't rig what you can't separate.
- Skipping hidden overlap. Rotating a limb exposes the gaps you didn't paint.
- Working too small. Low-resolution art softens as soon as you scale or push the camera in.
- Using pure black for details. It flattens the pastel look. Dark brown reads softer.
- Leaving layers unnamed. A 15-layer PSD with default names slows every handoff.
- Over-texturing before the shapes work. Check the silhouette first. If the pig reads as a pig in solid color, the texture will only help.
Quick Checklist
- Set canvas size, DPI, and RGB profile for your delivery target.
- Sketch in light color, then refine on a new layer.
- Split body parts across named layers with extended overlaps.
- Use clipping masks for shading and mud.
- Export a layered PSD and import it as an After Effects comp.
- Rig with parenting and Puppet Pins, or extend the asset with keyframe-driven tools like Frames-to-Video.
- Render image sequences for compositing in After Effects or Nuke.
A well-built pig drawing is only a few shapes and some careful layer discipline. Done in the right order, the same file serves as an illustration, a rig, and a reference for AI-assisted motion.