How to Make Panels in Procreate
StyleFrame Team8 min read
Procreate has no built-in comic panel tool, so you make panels with its Drawing Guide, rectangle selections, and QuickShape. The most reliable method is to set a grid, fill rectangles for each panel, invert the selection onto a new layer to build a "frame" layer, and put your artwork on layers beneath it. For freehand panels, draw a line with a monoline brush, hold at the end of the stroke for QuickShape, and connect the edges.
What Procreate Does and Doesn't Give You for Panels
Procreate is a raster drawing app. Unlike Clip Studio Paint or MediBang, it has no vector panel objects, no panel-splitting tool, and no comic layout presets. Users have requested a panel feature on Procreate's feedback forum, and the team has marked it as under consideration, so for now every approach is a workaround built from existing tools.
That's less limiting than it sounds. A panel is a rectangle, or another shape, with a gutter around it, and Procreate's selection tools, guides, and clipping handle that well. The trade-off is that you do the layout math yourself, and anything you draw is pixels, so the canvas resolution you choose at the start matters.
Set Up the Canvas Before You Draw Anything
One user on Procreate's feedback forum complains that panel templates look pixelated once they're scaled to fit the canvas. Placing a low-resolution PNG border and stretching it softens the edges. Avoid this by building the panels natively on a canvas that's already at the right size.
- Choose the final size first. For print, a letter page is 8.5 × 11 in. For webcomics or vertical scroll formats, pick the pixel width your platform expects.
- Use 300 DPI for print. If the pages will only appear on screen, DPI matters less than pixel dimensions, but build at the largest size you'll need.
- Decide margins and gutters in advance. A 0.5 in outside margin with 0.25 in gutters is a workable starting point on a letter page.
- Add print guides if needed. If you plan to print, mark the trim and safe area on a separate layer. Some free community comic kits include print marks and a starter panel for this reason.
If you're making panels for a storyboard or animatic, match the canvas to your target aspect ratio instead, such as 16:9 or 2.39:1, so the frames drop into your edit without cropping.
Method 1: Grid-Based Panels with a Frame Layer
This method gives you even gutters and clean edges. It's also non-destructive, because the panels live on their own layer.
Step 1: Turn on a Drawing Guide
Open Actions > Canvas and enable Drawing Guide, then tap Edit Drawing Guide. Set the grid size to a unit you can reason about. On a letter page, 0.25 in works well: a 0.5 in margin is two grid squares and a 0.25 in gutter is one. Drawing Assist can also help keep your strokes consistent while you draw.
Step 2: Fill Your First Panel
Create a new layer and open the Selection tool. Choose Rectangle, drag out your first panel using the grid as a ruler, and fill it with a solid color. Black is easy to see while you work.
Step 3: Fill the Rest of the Page
Repeat for each panel on the same layer, using the grid to keep gutters consistent. If a panel is slightly off, reselect it and use the Transform arrow tool in Freeform mode, which lets you change width and height independently.
Step 4: Invert to Create the Frame
Tap the panel layer and choose Select. Then tap Invert in the selection toolbar. The gutters and margins are now selected rather than the panels.
Add a new layer and fill the selection with your page color. You now have a frame layer: an opaque page with panel-shaped holes. Hide or delete the original black-panel layer.
Step 5: Put Art Underneath
Draw on layers below the frame. Because the frame covers everything outside the panel holes, artwork can bleed across panel edges without showing in the gutters. If you need to recolor the page, change the frame fill. A white frame can make panels hard to see while sketching, so a light gray background layer helps during drawing.
Method 2: Freehand Panels with QuickShape
If you prefer inked borders or irregular layouts, draw the borders directly.
- Pick a single-width brush such as the Monoline brush from the Calligraphy set. Increase the size for thick borders.
- Draw a line and hold the pencil at the end of the stroke. QuickShape straightens it.
- While still holding, drag to rotate the line. Touch the screen with a second finger to snap to angle presets, which gives you true horizontals and verticals.
- Draw the remaining sides and make sure the corners connect. Erase any overshoot.
- For a perfect rectangle, draw a rough rectangle and hold to let QuickShape clean it up. You can then duplicate the layer to reuse that shape.
The weakness of this approach is sameness: a page of identical rectangles reads as flat. Use it as a starting point and then vary panel sizes and angles to control pacing. Larger panels slow the reader down, narrow ones speed things up, and angled borders add tension.
Keep Artwork Inside Each Panel
Procreate's clipping masks are the tool for containing art.
- Clipping mask: Put a filled panel shape on a base layer, then place your artwork layer above it and choose Clipping Mask. The art shows only where the base has pixels.
- Group per panel: Put each panel's layers in a group. This makes it easy to move, hide, or export a single panel.
The frame-layer method from earlier is faster for a full page, while clipping is better when a panel has its own shape or needs to be moved around.
Non-Rectangular and Overlapping Panels
For diagonal or irregular panels, use the Selection tool in Freehand or Polygon mode. Tap points to define the shape, close it, and fill. The same frame-layer invert trick works with any selection shape.
For overlapping or "broken-frame" effects, keep the frame layer for the standard panels and add a separate layer above it for elements that break out of the border, such as a character's arm crossing a gutter. Because the frame is its own layer, you can erase part of it or paint over it where needed.
Brushes, Templates, and Kits
You don't have to build everything from scratch. Community creators sell and share panel brushes, templates, and print-ready comic kits. Dynamic panel brushes let you drag out panels with a stroke, and free kits supply a 300 DPI letter-size document with print marks and a starter panel. These save time, but they're workarounds for the same missing feature, so check whether the template matches your canvas size before you commit to it.
It's still worth learning the manual methods. Panel design and flow affect how a page reads, and drawing your own panels gives you control over rhythm that a stock template doesn't.
Common Mistakes
- Scaling raster templates. Import-and-stretch causes soft edges. Build at final resolution.
- Uneven gutters. Without a grid, gutters drift. Use the Drawing Guide and keep one gutter width throughout.
- Merging too early. Keep the frame, art, and lettering on separate layers so you can revise the layout later.
- Forgetting bleed. For print, extend art past the trim line so a slightly off cut doesn't leave white edges.
- Putting lettering inside panel groups. Keep balloons and text on layers above the frame so they can cross panel borders.
Taking Procreate Panels into Motion
If you work in motion, panels often become the first stage of a longer pipeline: a motion comic, an animatic, a title sequence, or a storyboard. Procreate is handy for the layout, but the animation usually happens elsewhere.
A practical hand-off looks like this:
- Export layered. Export your artwork in a layered format with each panel's layers or groups intact. Name layers clearly before exporting.
- Import into your motion software. Bring the file into a program such as After Effects with layers retained, so each panel group becomes something you can animate with position, scale, and parallax.
- Plan camera moves. Treat each panel as a shot. A slow push into a panel and a pan across a wide one go a long way without any redrawing.
- Use Premiere Pro for timing. Cut the panels together with temp audio to check pacing before polishing in After Effects.
Where you want more than a camera move on flat art, you could explore a tool such as .
You keep your compositing workflow and use Procreate for what it does well: drawing.
Quick Summary
- Procreate has no native panel tool, so use the Drawing Guide, rectangle selections, and QuickShape.
- Set your final canvas size and DPI before drawing panels to avoid pixelation.
- For clean pages, fill panels, invert the selection, and fill the gutters on a new layer to make a frame layer.
- For inked or irregular panels, use QuickShape with a monoline brush and vary panel sizes for pacing.
- Use clipping masks and groups to keep art contained, and keep lettering above the frame.
- Export layered files when panels are headed into motion software, and consider a tool like Styleframe if you want to explore motion from your key frames.