How to Make Neon Colors in Procreate
StyleFrame Team8 min read
To make neon colors in Procreate, work on a black canvas, draw a monoline stroke in a bright, saturated color, and add a thin near-white core on a layer above it. Then build the glow with a blurred duplicate (Gaussian Blur) or the Bloom effect, and set a copy of the colored layer to the Add blend mode at reduced opacity. The glow gets its intensity from the dark background, the hot core, and the layered falloff, not from any one filter.
What Makes a Color Read as Neon
Neon is mostly a contrast illusion. A color looks like emitted light when three things line up:
- High saturation. Pick colors near the edge of the color disk, such as hot magenta, electric cyan, acid green, and UV violet. Muted tones turn muddy as soon as glow layers stack on them.
- A bright core. Real gas tubes blow out to near-white at the center, where the color is most intense. Without that core, a stroke looks like a colored line with a soft shadow.
- A dark surround. Glow only reads against darkness. A black or deep navy background does half the work.
Keep this in mind for later: the glow should be a lighter, more saturated cousin of the base color, not a gray or desaturated halo.
Set Up the Canvas
- Create a new canvas at the size you'll need downstream. For video, use a 16:9 canvas at 3840×2160 if your iPad's memory allows, or 1920×1080 if you plan to scale later. Higher resolutions can limit how many layers you can keep, so plan your layer count.
- Fill the background with black or a very dark blue, such as #05060F. Pure black is the safest starting point, but a slight tint can help the final composite feel less flat.
- Create a new layer for your artwork and name it clearly. You'll end up with several glow layers, so naming saves time.
Draw the Tube
Neon signs use tubing of uniform width, so a monoline brush gives the most believable result. Procreate's Monoline brush works well, as does any brush with no pressure variation.
- Pick your base color from the outer area of the color wheel.
- Draw the shape or lettering in a single pass.
- Real neon tubes don't overlap, so break lines where they'd cross. If you want a more realistic sign, add a short gap and a small "mount" mark where the tube bends behind.
Keep the stroke width generous. The white core and glow both subtract from the visible color, so a thin line will wash out quickly.
Build the Hot Core
Create a layer above the color stroke and draw (or duplicate and shrink) the same path in near-white, about a third of the width of the colored tube. Lock it with Alpha Lock if you're duplicating, then fill with white or a very pale tint of your base color. A slightly tinted white, like pale pink over magenta, looks more physically plausible than pure #FFFFFF.
If you're working from a duplicate of the colored layer, you can also select the layer, open Adjustments > Hue, Saturation, Brightness, and push brightness up until it blows out to white. That keeps the core aligned to the original path.
Two Ways to Create the Glow
Method 1: Bloom
This is the faster option.
- Select the colored layer.
- Open Adjustments (magic wand) > Bloom.
- Drag across the screen to increase the effect, then experiment with the three controls at the bottom to get the look you want.
Bloom is useful for quick graphics and social posts. Its limitation is that the result is baked into the layer and gives you less independent control over the inner and outer glow.
Method 2: Layered Gaussian Blur
This is slower but gives you much more control over the look.
- Duplicate the colored layer two or three times.
- On the first duplicate, apply Adjustments > Gaussian Blur with a small amount for a tight inner glow.
- On the second, apply a larger blur for the wide outer halo.
- Set the blurred layers to the Add blend mode (tap the "N" on the layer). Add stacks light instead of covering it, which is what makes the glow feel emissive.
- Reduce opacity on each layer until the halo is visible but not overpowering. A common stack, from bottom to top, is: wide halo, tight glow, original color stroke, white core.
Because the right blur amount depends on your line width and resolution, judge by eye rather than copying numbers.
You can combine both methods. Apply Bloom lightly to the base layer, then add one wide blurred layer for ambient spill.
Add Light Spill and Shadows
To seat the neon in a scene:
- Color spill. Create a layer above the background, set it to Add or Screen, and paint a big soft brush stroke of the neon color on nearby surfaces like a wall or floor. Keep opacity low.
- Contact shadows. If the tubes are mounted, add small dark shadows under the bends and at the mounting points using Multiply.
- Atmosphere. Add faint haze around the brightest areas with a large airbrush at low opacity.
A brick wall or concrete texture, desaturated and darkened with a vignette, is a common background. Dropping the neon's color spill onto it sells the effect.
Color Choices That Work
- Pairs: magenta with cyan, orange with deep blue, and green with violet are classic complements that hold up against black.
- Use one dominant hue. Mixed neon colors fight each other; let one lead and use the second as an accent.
- Shift the glow hue slightly. Make the outer halo a little more saturated or hue-shifted than the core, for example orange-pink around a pink tube. This adds depth.
- Check on a calibrated display. Highly saturated colors can clip or look different when converted to a video color space. Preview in your final color space if possible.
Export for a Motion Pipeline
If the artwork is going into After Effects, Premiere Pro, or a 3D tool, how you export affects how much you can adjust later.
- Separate the glow from the art. Group your layers and export a version with the glow layers hidden. Then export the glow layers separately. In your compositing software, you can set the glow to Add or Screen over your footage and adjust opacity without redrawing anything.
- Transparent PNG. Hide the background color layer (and any solid backgrounds) before exporting to PNG so alpha is preserved. Note that glow built with Add mode on a transparent background doesn't always translate as expected, because Add depends on what's beneath it. Test it over your actual background, or bake the glow over black and use Screen or Add in your compositing software to drop the black out.
- Animated output. Procreate's Animation Assist lets you create frame-based loops, such as flickering or turning on in stages. For production, a PNG sequence is the safest choice.
- Do the final glow in comp. Procreate is great for the design. For final-pixel work, you'll often get cleaner and more controllable results by drawing the tubes in Procreate and building the glow with the blur, glow, and curves tools in your compositing software.
Animating the Neon: Where Styleframe Fits
Procreate gets you a strong still or a short frame-by-frame loop. Animating it in more complex ways, such as a sign powering on, a camera move around a neon object, or restyling a shot to carry the same look, is where a second tool helps.
Styleframe is an AI video and motion tool built around artistic control rather than one-click output. It can help extend a Procreate design into motion, and you keep control of the final glow, color grade, and blend modes in your compositing software. Treat it as a way to extend your Procreate design into motion, not a replacement for the compositing steps above.
Common Mistakes
- Glow on a gray or bright background. Add-mode glow disappears on light backgrounds. Keep the scene dark.
- No white core. The stroke looks flat and colored instead of lit.
- Too much blur at full opacity. The result is a smudge. Keep the halo low and let the tight glow and core define the shape.
- Desaturated base colors. Glow layers multiply the muddiness. Start saturated.
- Baking everything into one layer. You lose the ability to adjust glow intensity later. Keep layers separate until you're sure.
Quick Workflow Summary
- Black canvas, saturated color, monoline brush.
- Draw the tube, break lines where they'd overlap.
- Add a thin pale core on top.
- Create glow using Bloom, or layered Gaussian Blur duplicates set to Add.
- Add color spill and subtle shadows on the environment.
- Export glow and artwork separately for compositing, as PNG sequences if animated.
- Finish the glow, grade, and integration in After Effects or Nuke.
Once the stack of core, color, tight glow, and wide halo is built once, you can save it as a layer group and reuse it across projects, swapping colors and shapes as needed.