How to Make Neon Brush in Procreate
StyleFrame Team8 min read
To make a neon brush in Procreate, duplicate a smooth monoline brush, then tune it in Brush Studio into a clean, constant-width tube stroke. Pair it with a soft glow brush (or a duplicated, blurred layer) set to Add or Screen over a dark background. The glow comes more reliably from the layer stack than from one brush alone. A reliable neon look needs a core brush, a glow pass, and a few blend-mode decisions.
What Makes a Neon Look Read as Neon
Before touching Brush Studio, it helps to know what you're imitating. A neon tube has four visual parts:
- A hot core. The center is near-white, because the light is overexposed.
- A saturated tube color. Just outside the core, the hue is clear and strong.
- A wide, soft halo. Light spills onto the surrounding surface and into the air.
- A dark environment. Without contrast, there is nothing for the glow to push against.
Each part maps to a layer or brush in Procreate. The core is a thin white stroke, the tube is a wider colored stroke, and the halo is a blurred or soft-brushed layer in a light-adding blend mode. If you want to draw first and build the effect afterward, this structure lets you do that.
Step 1: Set Up the Canvas
Start with a dark canvas. Pure black works, but a deep navy, purple, or desaturated teal usually looks richer and gives the halo a color to interact with.
Use a high resolution if the art will leave Procreate. Layer count depends on canvas size, so check how many layers your canvas allows before you start. If the neon will be composited later, work at the delivery resolution or higher so you can scale down instead of up.
If you want a photographic backdrop such as brick or wood, import it and add a dark fill layer above it. Set that layer to Multiply or Linear Burn and lower the opacity until the surface is dim but still visible.
Step 2: Build the Core Tube Brush in Brush Studio
Start from an existing brush rather than a blank one. Swipe left on a smooth, even monoline-style brush and choose Duplicate. Editing a copy keeps the original intact. Then open the duplicate and adjust these tabs:
Stroke Path
- Lower Spacing so the stamps merge into a continuous line with no beading.
- Raise Streamline to smooth hand wobble. Neon tubing is bent by machine and heat, so wavering lines break the illusion.
- Keep Jitter at zero.
Stabilization
- Add some Stabilization if you're drawing long curves or script lettering. It lags the stroke slightly but produces cleaner arcs.
Taper
- Set both pressure and touch taper to zero or close to it. Real tubes have a constant diameter, so the line should start and end bluntly.
Apple Pencil
- Reduce or remove pressure-based size and opacity response. You want consistent width and full opacity, so a shaky press shouldn't change the tube.
Shape and Grain
- Use a plain round or square shape with no grain. Texture in the core makes the tube look sketchy rather than glassy.
Properties
- Set the maximum and minimum brush sizes to a range that suits your canvas. A tight range keeps the brush predictable.
Rename it "Neon Core" in the About tab so you can find it later. Draw a quick test curve and check that it looks uniform from start to end.
Step 3: Make a Companion Glow Brush
The second brush handles the halo by hand, which is useful when you want to place glow only where it belongs.
Duplicate a soft airbrush and edit it:
- Lower Flow or opacity response so each pass builds gradually.
- Remove or soften pressure-based size changes so the glow stays broad.
- Keep Grain off, or use a subtle fine grain if you want a slightly atmospheric haze.
Name it "Neon Glow." On a separate layer set to Add, a few slow passes in a saturated version of your tube color produce a halo that follows your strokes loosely. This is faster than blurring for small accents like a single sign edge or a bulb, though blur still gives more even results across long paths.
Step 4: Stack the Layers
Brushes are only half the technique. This layer recipe does the real work:
- Tube color layer. Draw the shape with Neon Core in your chosen hue, such as hot pink, cyan, or amber.
- Core highlight layer. Above it, draw a thinner stroke in white or a very pale tint of the tube color. A width of roughly a third of the tube is a good starting point. Slight imperfection is fine because blur will hide it.
- Inner glow layer. Duplicate the tube color layer, apply a Gaussian Blur from the Adjustments menu at a low value, and set the blend mode to Add or Screen.
- Outer glow layer. Duplicate the tube color layer again, apply a much larger Gaussian Blur, and set it to Add or Screen. Lower the opacity until the halo is visible but not muddy.
- Optional Bloom. Procreate's Bloom adjustment can add a final lift to the brightest areas. Use it sparingly, because heavy settings wash out color and flatten the contrast.
The right blur amounts depend on line thickness and canvas size, so judge by eye. If the halo looks like a gray smudge instead of colored light, the blur layer is probably in Normal mode or the hue is too desaturated. Switch to Add or Screen and increase saturation.
Duplicate layers before applying blur so you always keep an editable original. That also lets you redraw or recolor the neon later without rebuilding the glow stack.
Step 5: Add Realism Details
A few small touches separate convincing neon from a generic glow:
- Break the lines where tubes would cross. Real neon is rarely a single overlapping stroke. Add small gaps and short connector stubs at the ends.
- Add tube mounts or shadows. A dark, soft shadow under bends or at crossover points suggests depth. Paint it on a Multiply layer.
- Reflect on nearby surfaces. A faint colored wash on the wall or floor, painted on an Add layer, makes the light feel physical.
- Vary the halo. A slightly uneven halo looks more natural than a perfectly uniform bloom.
- Use one accent of color contrast. A cyan tube next to a magenta one produces overlapping glow that mixes on the background, which is where Add mode shines.
Step 6: Test and Save the Set
Drag your two brushes into a new brush set so they're grouped. Test them on a blank dark canvas with straight lines, tight curves, and a short word, and fix any problems:
- If strokes look beaded, lower Spacing.
- If curves look jagged, raise Streamline.
- If the glow looks flat, check that the blend mode is Add or Screen rather than Normal.
- If the colors blow out to white, lower the glow layer opacity or reduce Bloom.
You can export the set through the brush set menu to reuse it across devices or share it with a team. Free third-party neon packs exist, including community-made cyberpunk sets on Procreate's Folio, and some of them are limited to personal use, so check the license before using one in client work. Building your own avoids that question and gives you a brush tuned to your style.
Taking Procreate Neon Into a Motion Pipeline
For motion designers, a neon drawing is often a starting point rather than a finished piece. Procreate gives you a quick, expressive way to draw the shapes, and the rest happens elsewhere.
Export cleanly. Hide the background and export the layers you need as transparent PNGs, or export a layered PSD. Keep the core, tube, and glow on separate layers if you want to control them in compositing.
Rebuild the glow in After Effects. The drawn halo is fixed once exported. In After Effects you can place the tube layer, add Glow or a stack of blurred duplicates set to Add, and animate intensity for flicker, buzz, or a sign powering on. This approach keeps the halo adjustable and avoids re-exporting from Procreate for every note.
Animate in your motion tool of choice. You can animate the drawn strokes frame by frame, or trace them to vectors for reveal-style animation.
Use Styleframe for stylistic extension. If you want the neon look to carry across footage or a sequence rather than a single illustration, can help as a reference-driven step. You can use your finished Procreate neon frame as a reference, so the look is guided by your own artwork instead of a text prompt.
None of this replaces the hand-built brush work. Procreate is where you control line quality and design, and Styleframe is a way to extend that look into motion when drawing every frame isn't practical.
Common Mistakes to Avoid
- Working on a light background. Add and Screen modes need darkness to read.
- Using one blur for everything. Neon needs a tight inner glow and a wide outer glow, and a single blur flattens the effect.
- Leaving taper and pressure on. Variable width makes the tube look like ink, not glass.
- Overusing Bloom. It can obscure the line quality you spent time building.
- Skipping layer organization. Name your layers (core, tube, inner glow, outer glow) so revisions are quick.
Quick Reference
Once the two brushes and the layer recipe are saved, a neon sign takes minutes to build. The effect depends less on any single brush setting than on the stack: a clean core, a saturated tube, and light-adding glow over a dark ground.