How to Make Monoline Brush Procreate
StyleFrame Team8 min read
To make a monoline brush in Procreate, tap the brush library, hit the + icon to open Brush Studio, and start from the default brush. Set spacing low (around 7-8%) and raise streamline, remove pressure sensitivity from size and opacity, set the minimum and maximum size to suit the line weight you want, then rename and save it. The result is a stroke that stays the same width however hard you press. Procreate also ships a default Monoline brush in the Calligraphy set, so you only need a custom one if you want different spacing, smoothing, or size behavior.
What a monoline brush does
A monoline brush draws a line of constant thickness from start to end. There is no pressure-driven swelling, no taper, and no texture. It is closer to a vector stroke than to a pen or ink brush, which is why it is popular for lettering, icon work, line illustration, and coloring-book art.
For motion designers, that consistency matters. Uniform strokes are easy to trace into shape paths, easy to match across frames, and predictable as reference material for other tools. If you are drawing styleframes, storyboards, or hand-drawn elements to animate later, a clean monoline brush saves cleanup time.
Check the default Monoline brush first
Before building anything, open the brush library and look in the Calligraphy set. The default Monoline brush normally sits there, and you can use it as-is. Adjust its size with the slider on the left side of the canvas, or open the brush settings to enter a precise value.
If you want to keep a particular thickness, swipe left on the brush and choose Duplicate, then rename the copy. Duplicating protects the original and gives you a custom variant without touching the default.
Build a monoline brush from scratch in Brush Studio
Building your own takes a few minutes and lets you control exactly how the line behaves.
1. Open Brush Studio
Open a canvas (the size does not matter for brush creation), tap the Brush tool to open the library, and tap the + icon. Brush Studio opens with a default brush already loaded. You will edit this rather than start from nothing.
2. Stroke Path: spacing and smoothing
In the Stroke Path panel, reduce Spacing to roughly 7-8%. Low spacing places the brush stamps close together, so the stroke reads as a continuous line instead of a chain of dots.
Next, raise Streamline. Values between 50% and 100% all work. Higher values smooth out hand wobble, but they also make the line lag behind your pencil and round off sharp corners. For flowing lettering, push it high. For geometric or technical drawing, stay lower so corners stay crisp.
3. Remove pressure response
This is the step that makes the brush truly monoline. In the Apple Pencil panel, turn off the pressure effects on opacity, and flatten any pressure response on size. If opacity changes with pressure, the line will look uneven and semi-transparent. You want solid, consistent ink.
Also check the Taper panel. If the brush has pressure or touch taper, strokes will thin at the ends. Set the taper to zero if you want blunt, even endings, or keep a small amount if you prefer softly finished strokes.
4. Properties: size limits
Open Properties. The Maximum Size slider controls how large the brush can get. Leave it high for a chunky line, or lower it if you mostly want fine lines. Set Minimum Size with the same logic: it defines how small the brush can go when you shrink it with the size slider.
Think about the line weight you will use most. A thin monoline for annotation and icon outlines wants a smaller range. A thick one for bold lettering wants a larger one.
5. Shape and grain
Keep Shape as a simple round source, with scatter and rotation randomization off. Keep Grain empty so no texture shows through the stroke. Any variation in shape or grain stops the line from reading as uniform.
6. Name and save
Open About this Brush, rename the brush (for example "Monoline 8px"), and tap Done. It appears in the library, ready to test. Draw a few straight lines, curves, and a short word at several sizes. If the edges look jagged or the line feels delayed, revisit spacing and streamline.
Make a monoline brush thinner or thicker
Once the brush exists, changing weight is simple:
- Drag the top slider on the left side of the canvas up for a thicker line and down for a thinner one.
- For precision, open the brush settings and type in a size value.
- Test the thickness in context, such as inside a letter or on the shape you are actually drawing, because a line that looks right in isolation can feel heavy once it is next to other strokes.
- When you land on a weight you like, duplicate the brush and name each copy by its size so you build a small set (fine, medium, bold).
A set of fixed-weight monoline brushes is handy when you are producing a consistent illustration system, because every asset shares the same line weight.
Fixing a missing or overwritten Monoline brush
Some users have reported that the default Monoline brush seems to disappear. Default brushes cannot be deleted or moved out of their home sets, so it is usually still there, just overwritten or out of view. Try these steps in order:
- Scroll the full Calligraphy set, including the bottom below Script. In some users' sets, Monoline sits near the end.
- Look for a brush that appears out of place or duplicates another brush. Swipe left on it and tap Reset. In reported cases, a different brush had overwritten Monoline, and resetting restored it.
- If that fails, duplicate the suspicious brush. In some reported cases both copies reverted to the lost original.
- Use the QuickMenu: long-press a slot, choose Select Brush, and navigate to the Calligraphy set to assign the brush directly.
If none of this works, you can always build the custom version described above. Note that a custom brush is not a default brush, so it can be deleted. Use Create Reset Point under About this Brush to protect your settings.
Bringing monoline artwork into a motion pipeline
A monoline drawing is a good starting point for animation, but Procreate is only one stage. A typical path looks like this:
- Export as a transparent PNG, a layered PSD, or a PNG sequence if you used Animation Assist.
- Import into After Effects. A layered PSD can come in as a composition with separate layers, which keeps your line work, color fills, and backgrounds editable.
- Trace to shape paths if you want a resolution-independent line. Uniform stroke width converts cleanly, and once you have shape paths, effects like Trim Paths let you animate a write-on.
- Keep line weight consistent across assets by reusing the same saved brush, so frames from different sessions match.
Draw at a high canvas resolution if the art will be scaled up in a video comp. Strokes drawn small and enlarged later will soften.
Where Styleframe fits with monoline art
Once you have monoline drawings, the next problem is often motion and style: how do you get a hand-drawn look to move, or carry a clean line style across new shots? Styleframe is an AI video and motion tool built for artistic control rather than one-click output. Everything is driven by your own reference images, video clips, and keyframes.
A few practical ways it can work with monoline art:
- Frames-to-Video: use drawn start and end frames from Procreate as keyframes and let the tool generate the motion between them, so the composition and line character come from your art.
- Ink-and-Paint and Restyle: use a monoline drawing as the style reference, then apply that look to other footage or frames. Results depend on your reference quality, so test on a short clip first.
- 2D-to-3D, Turntable, and Remove Background: turn a flat illustrated asset into a rotating or isolated element you can drop into a comp.
- 4K Upscale: bring generated output up to production-ready 4K.
Iteration is non-destructive, so you can try several references and settings without losing earlier versions. Output exports as image sequences, which slot straight into After Effects or Nuke. An After Effects plugin is on the way. Your compositing workflow stays intact, and Styleframe sits upstream as a generation and style step rather than replacing it.
Troubleshooting common monoline problems
- Line looks dotted or beaded: spacing is too high. Lower it.
- Line lags or rounds corners: streamline is too high. Reduce it.
- Line varies in opacity: Apple Pencil pressure is still affecting opacity. Turn it off.
- Ends look pointed: taper is active. Set it to zero.
- Edges look textured: a grain source is applied. Remove it.
- Strokes look different at different sizes: check the minimum and maximum size settings and re-test.
Summary
Making a monoline brush in Procreate comes down to four decisions: low spacing, a streamline level that suits your drawing style, no pressure response on opacity or size, and no taper, shape variation, or grain. Save it with a clear name, duplicate it for other weights, and protect it with a reset point. From there, export clean layered files or sequences into After Effects, and if you want to extend that line style into motion, treat your drawings as keyframes and references in a tool like Styleframe while keeping final compositing in your usual pipeline.