How to Make Lineart Thicker in Procreate
StyleFrame Team8 min read
Procreate paints in pixels rather than vector paths, so you can't select a line and increase its stroke weight after drawing it. The most reliable workaround is to duplicate the lineart layer, nudge each copy a pixel or two in different directions, and merge them, which fattens every line at once. For larger changes, blur the layer and tighten it with Curves, or redraw over the lines on a new layer with a bigger brush.
Why You Can't Just Change Line Weight in Procreate
Procreate is a raster app. Once a stroke is on the canvas, it is a set of colored pixels, not a path with an adjustable width, so there's no stroke-weight slider to go back to. A Procreate team member has said that changing brush type or line weight after a stroke is applied won't be coming to the app, and community members point to its raster nature as the reason it's unlikely.
That changes how you should think about the problem. You aren't "editing the line". You're growing a pixel shape, either by stacking offset copies, by blurring and re-thresholding, or by drawing again. Each method has tradeoffs in edge quality and control.
Before you start, put your lineart on its own layer. Every method below assumes the lines are isolated from color, shading, and background. If they aren't, select the lines, copy them to a new layer, and work from there. Keep the original layer hidden as a backup so you can toggle between versions and compare.
Method 1: Duplicate and Merge the Lineart Layer
This is the simplest approach and works well for modest thickening.
- Duplicate your lineart layer 10 to 20 times (swipe left on the layer, tap Duplicate).
- Select the duplicates, pinch them together to merge them, and leave the original untouched.
- Toggle the merged layer's visibility to compare it against the original.
Stacking the same pixels on top of each other builds up opacity at the anti-aliased edges. Soft, semi-transparent fringe pixels become more opaque, so the line looks heavier. The effect is real but limited. If you want more, duplicate the merged layer several times and merge those again.
Tradeoffs:
- It won't dramatically change line weight.
- Depending on the brush, edges can turn crunchy or pixelated.
- It only works cleanly if the lineart is isolated.
Use it when you need a subtle boost and the lines are already reasonably clean.
Method 2: Duplicate, Offset, and Merge
This method gives you more control and a bigger change. Instead of stacking identical copies, you shift each copy slightly so the lines spread outward.
- Duplicate the lineart layer.
- With the Transform tool active, nudge the duplicate one or two pixels in one direction. Tapping nudges in small increments.
- Repeat with more duplicates: one up, one down, one left, one right.
- Merge the copies together with the original.
Each offset adds width in that direction, so copies shifted up, down, left, and right add weight to both the horizontal and vertical parts of the line. Add diagonal copies if you want rounder results on curves.
Tips:
- Use smaller nudges across more copies for smoother results. Big jumps create stair-stepping on diagonals.
- Work at your final canvas resolution. A 1-pixel shift on a large canvas looks very different from one on a small canvas.
- Keep the original layer separate until you've confirmed the result.
Method 3: Blur the Layer, Then Tighten It With Curves
This approach is more of a "grow and re-harden" technique. It's useful when you want smoother, more uniform results than offset copies give you.
- Duplicate your lineart layer so you have a safe original.
- Open Adjustments and choose Gaussian Blur, then apply it to the layer with a small amount. The lines spread outward and soften.
- Open Curves and adjust the alpha or luminosity response so semi-transparent pixels become more opaque. In practice, you steepen the curve so faint edges snap toward solid.
- Merge and compare.
The blur expands the footprint of each line, and Curves rebuilds a crisp edge from it. More blur plus a more aggressive curve produces thicker lines.
Tradeoffs:
- Fine detail can fill in. Hatching and tight crosshatching may clog up.
- You'll need to experiment, since the right blur and curve depend on your brush and resolution.
- Results are destructive on that layer, so always work on a duplicate.
This is the method to try when Methods 1 and 2 leave edges looking rough.
Method 4: Push the Pixels With Liquify
Liquify offers an Expand mode that pushes pixels outward from the brush point. Painting over lineart with a small Expand brush can bulk up specific areas.
This is a manual, local fix, not a global one, so it suits touching up a few weak spots rather than thickening a full illustration. It can also distort shapes if you push too far, so use low pressure and a small brush, and keep a backup layer.
Method 5: Redraw on a New Layer With a Bigger Brush
When you need a clean, intentional line weight, tracing is often the best answer, even though it feels like the slow option.
- Lower the opacity of the original lineart layer.
- Create a new layer above it.
- Trace with a larger brush size, using StreamLine to smooth your strokes.
- Hide or delete the original when you're done.
Because you're drawing at the target weight, you get proper pressure variation and clean edges. This also lets you vary the weight deliberately, with heavier outlines on silhouettes and lighter interior lines, something the global methods can't do.
Getting the Weight Right Next Time
Fixing thin lines is slower than preventing them. A few habits help:
- Set your canvas size up front. A larger canvas gives you more pixels to work with, so line weight and quality hold up when you scale or export.
- Check the brush's size and pressure settings. In Brush Studio, review the minimum size and pressure response so strokes don't taper too thin at light pressure.
- Keep lineart on its own layer from the start. Every thickening method gets easier and cleaner.
- Save a version at final export size. Test line weight at the size it will actually be viewed, not just zoomed in on your iPad.
Thickening Lineart After Export: A Better Route for Motion Work
If your lineart is headed into a motion or compositing pipeline, you may be better off exporting the thin version and thickening it downstream, where the tools are built for it. A transparent PNG of the lineart gives you a clean alpha channel to manipulate.
In After Effects, effects like Simple Choker (negative values grow the matte) or Minimax (maximum operation on the alpha channel) expand lines in a controllable, animatable way. Because these are effects, you can keyframe or adjust the thickness at any time, which Procreate can't do. In Nuke, dilate and erode filter nodes do the same job on alpha, and you can drive them procedurally. Blender's compositor offers a comparable Dilate/Erode node.
This route is non-destructive, and it keeps line weight consistent across a whole sequence of frames, something that's painful to do by hand on each frame in Procreate. The cost is that morphological expansion grows shapes uniformly, so it won't give you the pressure-style variation of a hand-drawn line.
Where Styleframe Fits for Animated Lineart
If you're working with lineart across many frames rather than a single illustration, line weight consistency becomes the real challenge. Styleframe is an AI video and motion tool built for artistic control.
It's not a replacement for fixing an individual Procreate drawing. It's more useful when you have a style you've drawn in Procreate and want to carry it across motion. If you bring the results into After Effects or Nuke as image sequences, you can still apply Simple Choker or Dilate-style adjustments to fine-tune weight.
Quick Reference: Which Method Should You Use?
Frequently Asked Questions
Can I change line thickness in Procreate after drawing?
Not directly. Procreate is raster-based, so strokes are pixels rather than editable paths. You need to grow the pixels using duplication, blurring, or redrawing.
Will thickening lines make them blurry?
It can. Offset-and-merge and blur-based methods can soften or roughen edges, particularly at low canvas resolution. Working on a larger canvas and tightening with Curves helps.
Is there a vector option?
Procreate has no vector line tools. If you need adjustable stroke width, export your lineart and trace or work in a vector app, or thicken it in After Effects or Nuke as an alpha operation.
What's the best method for an animation pipeline?
Export the lineart with transparency and thicken it in your compositor, where the adjustment is non-destructive and consistent across frames.