How to Make Line Weights in Procreate
StyleFrame Team9 min read
In Procreate, you set line weight with the brush size slider, then shape it with Apple Pencil pressure and the brush's Pressure and Size settings in Brush Studio. Procreate is a raster app, so a stroke's weight is fixed once it's drawn. To change it later, you either redraw the line or thicken the pixels by duplicating and merging layers, or by blurring and sharpening the line layer's alpha.
How Procreate Handles Line Weight
Procreate has no vector strokes, so no line has an editable "width" property. Each stroke is pixels on a layer, which has three practical consequences:
- Weight is set at draw time. Brush size, pressure, and the brush's settings determine the result.
- Scaling changes the line weight. Shrink a drawing and the lines get thinner and softer. Enlarge it and they get thicker and blurrier.
- There's no "select stroke, change width" command. Thickening a line afterward is a pixel-editing workaround, not a property edit.
Once you accept this, planning becomes the main skill. Decide your canvas size and your weight hierarchy before you start inking.
Set Line Weight While You Draw
Use the Size slider
The left-hand sidebar has two sliders. The upper one controls brush size and the lower one controls opacity. Drag the size slider up for heavier lines and down for finer ones. Tap the small square between the sliders to bring up the Modify button if you want precise control.
Pick sizes deliberately instead of eyeballing them. For a consistent look, choose two or three stock sizes, such as a heavy outline, a medium detail line, and a hairline, and return to them. Keeping a note of the slider positions helps if you're drawing frames across several sessions.
Let pressure do the work
With an Apple Pencil, harder pressure usually produces a thicker or darker stroke, depending on the brush. This gives you the natural swell and taper in a line without changing the slider. To tune it:
- Open Actions (wrench icon) → Prefs → Pressure and Smoothing.
- Adjust the pressure curve so light, medium, and heavy strokes map the way you want. A steeper curve exaggerates variation, while a flatter one gives more uniform lines.
If your lines look too uniform, the cause is often the brush's own settings rather than your hand. Move on to Brush Studio.
Tune the brush in Brush Studio
Tap a brush to open Brush Studio. The settings that matter most for line weight:
- Apple Pencil → Size (pressure and tilt): Controls how much pressure changes width. Increase it for expressive, calligraphic lines. Reduce it for technical, even lines.
- Properties → Maximum and Minimum Size: Sets the range the size slider can reach. A narrow range protects you from accidentally drawing outside your intended weights.
- Stroke Properties → Streamline: Smooths wobble in the line path, which is helpful for confident, clean curves.
- Taper: Controls how the start and end of a stroke thin out. Heavy tapers suit ink and brush looks, while minimal tapers suit uniform, graphic outlines.
- Stabilization (in the brush's Stroke Properties): Averages your motion for smoother lines at the cost of some responsiveness.
Duplicate a brush before editing it so you keep the original. Then name your variants, such as "Outline 12" or "Detail Fine."
Use QuickShape for uniform lines
Draw a line or shape and hold your Pencil at the end of the stroke. Procreate snaps it into a clean line, circle, or polygon. The snapped shape keeps the brush's size and settings, so it's a fast way to get consistent, geometric weights for things like panels, UI shapes, or graphic elements.
Build a Weight Hierarchy
Good line work depends less on the tool than on how you vary weight across the image. A simple system:
- Heaviest: The outer silhouette and objects in the foreground.
- Medium: Major interior contours, such as folds, overlaps, and where forms meet.
- Lightest: Surface detail, texture, and distant objects.
Heavier lines pull objects forward and lighter lines push them back. For animation frames, that hierarchy also keeps characters readable when they're small on screen.
Put each tier on its own layer: outline, interior, and detail. A separate layer for each lets you hide, recolor, or reshape weights without disturbing the rest, and it keeps compositing options open later.
Make Lines Thicker After You've Drawn Them
Procreate's own community staff have said stroke width can't be edited after the fact, so these are workarounds. All of them work best when the line art is alone on its own layer.
Method 1: Transform the layer
Select the line layer, use the Transform tool, and scale it. This works for a straight line you want to lengthen or widen, but scaling a whole drawing also scales the weight and softens the edges. It's a poor fit if the lines need to line up with other parts of the artwork.
Method 2: Duplicate and offset
- Duplicate the line art layer.
- Nudge the copy a pixel or two in one direction by tapping to move it.
- Repeat with more copies in other directions, then merge them.
Offsetting in several directions thickens the line fairly evenly. Offsetting in one direction gives you a drop-shadow-like thickening on one side. It's quick.
Method 3: Duplicate and merge repeatedly
Duplicate the line layer many times, merge the duplicates, and optionally repeat the process. Stacking semi-transparent edges makes the line's anti-aliased edge more opaque, which fattens the line slightly. Keep the original line layer hidden as a backup. The effect is modest, and depending on the brush, edges can look pixelated.
Method 4: Blur, then tighten with Curves
Another approach to try:
- Select the line art layer.
- Go to Adjustments → Gaussian Blur and apply a small amount to spread the line's edge.
- Open Adjustments → Curves and raise the low end of the alpha or luminosity response so the faint blurred edge becomes solid again.
Test on a duplicate layer first, because results depend on the line color, background, and how much you blur. Do it before adding color fills so you don't tangle the two.
Method 5: Just redraw
When a drawing has been scaled or heavily changed, redrawing the outlines on a new layer is often the cleanest option. Procreate's forum guidance for scaled-down maps was exactly this: scale the artwork, then redraw the outlines on top so they match the weight of the rest and become sharp again.
Avoid Weight Problems Before They Start
- Draw big, scale down. Start with a canvas larger than your delivery size. Downscaling is generally kinder than upscaling, though scaling can still soften line art. Make sure your final size still gives lines enough pixels to read clearly.
- Don't resize partway through. Changing weights by scaling pieces mid-project creates inconsistent lines. Redraw instead.
- Keep line art isolated. Separate layers are what make every thickening trick above possible.
- Check at final size. Zoom to 100% or view the export at its real resolution. Lines that look right zoomed in can vanish in a video frame.
Line Weight When the Art Is Going Into Motion
If your Procreate art is destined for After Effects, Premiere Pro, or Nuke, line weight needs a few extra decisions.
Export for compositing. Export layered or transparent PNGs, or a PSD, so line art stays separate from color. Alternatively, use Animation Assist for frame-by-frame work and export a PNG sequence. Lock your brush and size across frames so the line doesn't "boil" unintentionally.
Adjust weight in the comp. If you need slightly heavier lines after export, After Effects' Minimax effect (set to maximum or minimum on the alpha channel) can fatten or thin raster line art. Choker effects can do similar work on a matte. It's still raster editing, so large changes will soften or degrade edges. When you expect to change weight a lot, rebuild the line in a vector tool, or redraw it.
Be consistent across shots. If a character appears at different sizes, the same stroke will read as different weights. Plan to draw closer shots with proportionally heavier lines, or accept the variation as a style choice.
Where Styleframe Fits
Procreate is excellent for drawing keyframes with controlled line weight, but animating them frame by frame is a lot of work. is an AI video and motion tool built for artists who want to stay in control, and it can pick up where your Procreate drawings leave off.
- Frames-to-Video: Use your hand-inked Procreate frames as keyframes, and Styleframe generates motion between them. Because generation is driven by your references and keyframes, your drawn line style is the starting point, not something a prompt guesses at.
- Restyle and Ink-and-Paint: These reference-driven style transfer tools apply a look from a reference image or clip to footage. If you have a Procreate drawing with the line weight and linework you want, you can use it as the style reference and see how that look carries onto other material. Results depend on your references, so test on a short clip first.
- Remove Background, 2D-to-3D, Turntable, and 4K Upscale: These handle practical production steps, such as isolating a character, building a 3D view from a 2D design, rotating it, and delivering at 4K.
Iteration is non-destructive, so you can try different references or keyframes without overwriting earlier versions. Styleframe exports image sequences, so the output drops into your existing After Effects or Nuke comp, where you keep your normal compositing, color, and finishing workflow.
Line weight in AI-assisted output is still something to check and direct. Compare generated frames against your original drawings at full size, and bring in your reference at the weight you want rather than expecting a fix afterward.
Quick Reference
Final Thoughts
Procreate gives you good control over line weight at the moment of drawing, and very little after. Decide on your canvas size, brush settings, and weight hierarchy up front, keep line art on separate layers, and treat any later thickening as a workaround. If the art is headed into a motion pipeline, test it at final resolution early so you aren't forced to redraw at the end.