How to Make Letters on Procreate
StyleFrame Team8 min read
To make letters in Procreate, tap the wrench (Actions), choose Add, then Add Text, and type, or draw them by hand on a new layer with a stabilized brush. Typed text stays editable as vector until you rasterize it, so you can change font, spacing, and alignment freely. Hand-drawn letters are pixel-based, so work at a large canvas size.
Two Ways to Make Letters in Procreate
Procreate gives you two distinct routes, and most finished lettering pieces combine them:
- Typed letters use the Text tool and any installed or imported font. They are fast, consistent, and editable.
- Drawn letters use brushes on raster layers. They are slower, but they carry the irregularity and personality that fonts lack.
A third hybrid method, typing a base and tracing over it, sits between the two and is often the quickest way to get clean custom letterforms.
Method 1: Add Typed Text
This is the right choice for titles, labels, and any lettering where you want exact control over spacing and alignment.
- Tap Actions (wrench) > Add > Add Text. A bounding box containing the word "Text" appears, already highlighted.
- Type over it with the keyboard, or use Apple Pencil Scribble to write and have it converted into typed text.
- Double-tap the text to open the Text Entry Companion, where you can cut, copy, paste, and align.
- Tap the font name to open the Edit Style panel. Pick a font, then choose a style such as regular, bold, or italic if the font offers one.
- Adjust the Design controls: size, tracking, kerning, leading, and baseline.
A few practical notes:
- Style changes apply only to the highlighted characters, so you can mix fonts within a single word.
- Procreate's default font is Helvetica Neue. You can import your own TTC, TTF, or OTF files from the Edit Style panel.
- Drag the blue nodes on the sides of the bounding box to resize the container. This changes how the text wraps, not the size of the letters themselves.
- If your cursor is still blinking inside the text, deselect it first, or some options won't respond.
- Set opacity in the Layers panel rather than in the text settings. It is faster and applies the same way.
Kerning vs. tracking
Tracking changes the space between all letters at once. Kerning changes the space between a specific pair. For display lettering, set tracking first, then place your cursor between awkward pairs (an "A" and a "V," for example) and kern those individually.
Method 2: Hand-Letter on a Raster Layer
Hand lettering is less about handwriting than about treating each letter as a small illustration. You don't need beautiful penmanship, only a deliberate process.
Start with thumbnails
Write out your phrase on a sketch layer in a bright, visible color. Then try several layouts: different words on different lines, mixing a script word with block capitals, or fitting smaller words inside the curves of a larger one. Underline the words that matter most and let those drive the hierarchy. These sketches are meant to be rough and fast. You are deciding composition, not polishing.
Set up the canvas
Create a canvas larger than your final delivery size. Raster lettering can't scale up cleanly, and if the piece ends up in a 4K or higher comp, a small canvas will soften when you push it. Lower the opacity of your sketch, add a new layer above it, and draw the final letterforms on top.
Stabilize your brush
Procreate is sensitive enough to pick up every tremor in a curved stroke. Open the brush settings, go to Stabilization (StreamLine), and raise the amount. Somewhere around 60% is a sensible starting point. Push it too high and the line stops following your pen. A stabilized brush also won't track your natural handwriting closely, so if you want something that feels like normal writing, use a pencil-style brush with no stabilization.
Control stroke endings
If your strokes end in a little bump or point instead of a clean flat edge, pause for a beat before lifting the pencil, then lift straight up or back into the stroke instead of dragging away. The same applies at the start: a brief pause before you pull gives you a flatter beginning. If you want tapered, brush-pen-style ends, use gradual pressure instead.
Method 3: Type and Trace
Typing and tracing is the most reliable way to get clean, evenly proportioned custom letters, especially bubble, block, or monoline styles.
- Type your text with the Text tool in a font close to the style you want.
- Reduce the text layer's opacity and lock or leave it in place.
- Create a new layer above and trace over the letters with your brush, modifying shapes as you go.
- Hide the text layer and add details: swashes, highlights, shadows, texture.
For longer quotes this saves you from fighting spacing and alignment, so you can spend your time on the parts that give the piece character. Check your spelling before you trace. Fixing a typo after you have drawn forty letters is painful.
Keep Letters Clean and Aligned
- Drawing Guides: Turn them on under Actions > Canvas > Drawing Guide, and set the grid size to match your lettering scale. Use them to hold baselines and cap heights.
- Symmetry: Helpful for angled, curved, or mirrored layouts.
- QuickShape: Draw a line, hold until it snaps, and use a second finger on the screen to lock it to a perfect horizontal or vertical. This works well for the straight edges of block letters.
- Warp and transform: If a drawn word comes out wonky, use the Warp tool to straighten or reshape it instead of redrawing.
- Separate layers per word or letter: If the lettering is headed for animation, keep each word, or even each letter, on its own layer. Merge them later only if you have to.
Vector vs. Raster Text: When to Rasterize
Typed text in Procreate stays vector until you convert it. While it is vector you can retype, change font and spacing, add underline, outline, or capitalization effects, and scale without quality loss. You can also move it, transform it uniformly, adjust opacity, clip it, mask it, and group it.
To use other tools on it, such as selections, adjustments, painting, distortion, or merging, you need to rasterize it first. Once rasterized, it becomes a regular layer and you lose editable type. Duplicate the text layer before rasterizing, then hide the original, so you can always go back.
Export Lettering for After Effects and Other Tools
If the lettering is going into a motion piece, how you export matters more than how you made it.
- Resolution: Plan for the largest size you'll deliver. Raster lettering gets soft when scaled up in a comp.
- Vector text caveat: If you need type that stays truly editable and sharp, set it in After Effects or Illustrator rather than relying on Procreate's text for final delivery. Procreate is best for the hand-made, textured look.
Take Procreate Lettering Into Motion with Styleframe
Procreate gets you a strong static letterform. Animating it is a separate problem, and this is where can fit beside your existing tools. It is an AI video and motion tool built around artistic control rather than one-click output, and every generation is driven by your references: images, video clips, and keyframes.
A few practical uses for lettering made in Procreate:
- Frames-to-Video: Use keyframes, such as a first frame of rough sketch strokes and a last frame of the finished lettering, to generate the motion between them. You decide the start and end states instead of leaving the result to a prompt.
- Restyle and Ink-and-Paint: Use a reference image or clip to carry a specific look, like ink, paint, or a particular texture, onto your lettering or footage, so style stays consistent across shots.
- Remove Background: Isolate lettering or elements from a background before compositing.
- 2D-to-3D and Turntable: Turn a flat lettering piece into a 3D-style form and view it from multiple angles, useful for logo and title explorations.
- 4K Upscale: Bring generated output up to production-ready 4K.
Iteration is non-destructive, so you can try alternate keyframes or references without losing earlier versions. Output exports as image sequences, which means you can bring it into After Effects or Nuke and keep your compositing workflow intact. An After Effects plugin is on the way as well. Treat it as a way to explore motion and style from your lettering, then finish and composite the way you always do.
Common Problems and Quick Fixes
- Shaky curves: Raise brush stabilization, or draw the letter in shorter, confident strokes.
- Uneven letter spacing in hand lettering: Type-and-trace, or use guides and select-and-move individual letters on their own layers.
- Text won't change font or spacing: Make sure the cursor isn't active, and confirm the layer hasn't been rasterized.
- Fuzzy edges after export: Your canvas was too small. Redraw or rebuild at a higher resolution.
- Typed text looks generic: Mix a typed base with traced or redrawn details, or combine two fonts and customize the shared letters by hand.
Final Workflow Summary
- Sketch thumbnails to settle layout and hierarchy.
- Choose typed, hand-drawn, or type-and-trace based on how custom the result needs to be.
- Build on a large canvas, with each word or letter on its own layer.
- Use guides, stabilization, and clean stroke endings for consistent results.
- Export at the size your comp needs.
- Animate, restyle, or extend the lettering in your motion pipeline.
Procreate is quick to learn and gives you tactile, expressive letterforms. Once you treat letters as illustrations, you can move from simple typed text to fully custom lettering and carry it into After Effects.