How to Make Keychains with Procreate
StyleFrame Team8 min read
To make a keychain in Procreate, create a large canvas (around 2,000 × 3,000 px) in a CMYK color profile, draw your design with a clear outer outline, and put a marker on a separate layer where the hole goes. For a double-sided charm, duplicate the file, flip it horizontally, and redraw the back inside the same outline. Then export a flattened file and upload it to a keychain manufacturer such as Vograce, approve the digital proof, and order.
What You Need Before You Start
Procreate only produces the artwork. The physical keychain comes from a manufacturer, so the real job is preparing a file they can print and cut without surprises.
- Procreate on an iPad (or any canvas workflow that supports CMYK).
- A manufacturer with a keychain template or upload form. Vograce is the one used in several Procreate tutorials, but the same prep applies to other print-on-demand and bulk suppliers.
- A decision on material: acrylic, epoxy-domed acrylic, or PVC. This affects how you design the edges and whether the charm feels flat or domed.
- A target size. Most charms land between 1 and 3 inches, which dictates how much detail survives.
If you come from a motion or compositing background, think of this as delivering to a strict output spec. The manufacturer's requirements are your deliverable format, and the earlier you design to them, the fewer revisions you pay for.
Step 1: Sketch for Small Scale
Start with a rough on paper or in a throwaway Procreate layer. The constraint that matters most is scale. A design that reads well on a large iPad canvas can turn to mud at 2 inches.
- Keep text large and bold. Thin lettering disappears at charm size.
- Avoid scattered tiny floating elements. The cut line has to travel around every separate detail, so loose sparkles and stray hearts make the shape fussy and fragile.
- Favor a strong silhouette. A readable outline is the most important feature of an acrylic or PVC charm.
- Leave room for the hole. Plan a solid area (usually at the top) where the attachment point can sit without cutting into key artwork.
Step 2: Set Up the Procreate Canvas
Create a new canvas with these settings:
- Size: around 2,000 × 3,000 px is a comfortable working size. Larger is fine, but a keychain doesn't need poster resolution.
- Color profile: CMYK. Printers reproduce color with ink, which has a narrower gamut than a screen. Designing in CMYK from the start shows you how colors will actually look.
- Transparent background. You'll want a clean alpha around the shape when you export.
Procreate won't convert an existing RGB canvas to CMYK in one click. If you already painted in RGB, the workable route is to create a new CMYK canvas and copy your layers across. Expect some rework: glow layers, low-opacity effects, and neon colors often look flatter after the conversion. It's much easier to start in CMYK than to fix it afterward.
Handle Whites and Glows Carefully
Two quirks cause most "why does my proof look wrong" moments:
- Pure white doesn't exist as an ink color in CMYK. White areas may print as clear or transparent. If you want a visible white, shift it very slightly off-white.
- Soft glows and translucent sparkles often translate poorly. If a proof comes back wrong, split those effects onto their own layers and adjust them individually, or replace them with solid shapes.
Step 3: Draw and Color with Print in Mind
Work as you normally would, but keep the end product in view.
- Avoid highly saturated RGB-style colors. Neons and electric blues dull noticeably in print. Pick slightly deeper, more grounded tones.
- Use solid fills with clean line work. Charms print well with bold shapes and defined edges.
- Keep your structure simple unless you're making multiple designs. For a single design, many guides recommend keeping color and line art on one merged layer, since separate layers can print inconsistently. You'll need separate layers only for specific purposes, covered below.
Step 4: Build the Outline and the Hole Marker
Create a dedicated layer for the keychain's outer outline. This is effectively your cut path reference. Then add a separate layer with an X where you want the hole. Manufacturers use that marker to place the attachment point exactly. Keep it clearly distinct from your artwork so it doesn't get printed by accident, and so you can toggle it on or off for export.
Step 5: Make the Back Side (Double-Sided Charms)
Most acrylic charms are double-sided. You have two options.
Same design on both sides
The simplest route. Both sides share one design, and the outline automatically matches.
Different design on the back
- Duplicate your file.
- Flip the canvas horizontally. This shows how the back will look when the charm is turned over. If you leave a single design as-is on a double-sided charm, the back will appear mirrored.
- Keep the outer outline exactly the same as the front. The two shapes must align precisely.
- Redraw the interior freely, but don't change anything past the outer line unless you change the front too.
- Flip any text back so it reads correctly. A common mistake is leaving lettering mirrored.
A neat shortcut is to build a shared frame or border that stays constant, then change only what's inside. This keeps your edges perfectly matched.
To verify alignment, export each side with a transparent background and overlay them in a layer stack. If you work in After Effects or Photoshop, it's a familiar check: set one layer to a difference blend or lower opacity and look for edge drift.
Step 6: Export and Order
File format requirements vary by supplier. Vograce-style upload forms commonly accept JPEG, PNG, PDF, or AI. Before exporting:
- Hide anything that shouldn't print, such as guides, sketches, and notes.
- Keep the hole marker on its own layer as instructed by your manufacturer's template.
- Name files clearly. Some suppliers want quantity in the filename, so check their instructions.
Then:
- Choose the keychain type on the manufacturer's site (acrylic, epoxy, holographic, and so on).
- Select size, attachment/accessory style, and quantity.
- Upload your files.
- Review the digital proof carefully. This is your chance to catch translucent effects that didn't survive, edge misalignment, or a misplaced hole.
- Approve and place the order.
If you're ordering multiple designs, uploading several files of the same keychain type can count as one bulk order and reduce the price per piece. Check how your supplier handles that before you pay.
A Note on Test Orders
Some first-time makers find something to fix on their first batch: the back design looked wrong flipped, the final size felt smaller than expected, or colors shifted. If budget allows, order a small test run before committing to a large quantity.
Choosing a Material
Material opinions differ by supplier, so treat claims as starting points and judge from samples. If your charm has long, thin protrusions, a more flexible material may hold up better than rigid acrylic.
When your charms arrive, leave the protective film on if you're taking them to a convention or shipping them, and remove it only when you're done handling them.
Common Mistakes to Avoid
- Designing in RGB and converting at the end
- Leaving glow or translucent effects unseparated
- Forgetting that single-design double-sided charms mirror on the back
- Mismatched outlines between front and back
- Tiny text and fine floating details
- Skipping the hole-marker layer
- Not checking the proof closely
Where Styleframe Fits for Motion Artists
The print workflow above lives entirely in Procreate and your manufacturer's tools. But if you're a motion designer or video editor, you may also want to promote the charm: a product reveal, a social teaser, or a rotating shot for a shop page. That's where may help, as a companion to the physical process and not a replacement for it.
Styleframe is an AI video and motion tool. Check its current feature list to see which of its tools suit keychain promo work, such as isolating your flat charm art from its canvas, turning a flat design into a rotating view, or directing motion between keyframes. Treat anything it generates as a starting asset to composite and refine in your usual tools, and always check it against your real, manufactured product so promo visuals don't misrepresent the final charm.
Quick Pre-Order Checklist
- Canvas in CMYK, around 2,000 × 3,000 px
- Bold shapes, readable text, minimal floating details
- White elements slightly tinted
- Glows and translucent effects tested or simplified
- Hole marker on its own layer
- Back side flipped, text corrected, outline matched
- Files exported in a supported format and named per supplier rules
- Digital proof reviewed before approval
Follow that sequence and the Procreate side of keychain making is straightforward. Most problems come from color profile, mirrored backs, and fussy details, all of which you can solve before you upload anything.