How to Make Invitations on Procreate
StyleFrame Team7 min read
To make an invitation in Procreate, create a canvas at your final trim size plus bleed (a 5×7 in card at 300 DPI is a common choice) and build the background, frame, illustration, and text on separate layers. Set type with the Text tool using a clear hierarchy of names, date, and details, then export a PDF or PNG for print or digital sharing. If the invitation needs to move, such as a looping animated card or a video save-the-date, export your layers and finish it in After Effects.
Before You Start: Decide Where the Invitation Will Live
The destination decides your canvas settings, so settle it first.
- Printed card: You need physical dimensions, 300 DPI, bleed, and ideally a CMYK color profile.
- Digital invitation (text, email, social): Pixel dimensions matter more than inches. A 1080×1920 canvas suits Stories, and a 1080×1350 canvas suits feed posts.
- Animated or video invitation: Build at a video resolution such as 1920×1080 or 3840×2160 and plan your layers for animation from the start.
Changing size after the fact is possible, but it often means redoing the layout. Decide once, up front.
Step 1: Set Up the Canvas
- Tap + in the Procreate gallery, then the Custom Canvas icon.
- Enter your dimensions. For a 5×7 in card with 0.125 in bleed on each side, use 5.25 × 7.25 in.
- Set DPI to 300. Lower values look soft when printed.
- Choose a color profile. CMYK keeps printed color closer to what you see on screen, while RGB gives more vibrant results for digital-only use.
- Name the canvas and tap Create.
Keep in mind that Procreate limits the number of layers depending on your iPad model. Merge finished elements early and don't build the whole invitation as dozens of separate layers.
Step 2: Mark Bleed and Safe Areas
Printers trim cards slightly off, so a design that stops exactly at the edge can end up with white slivers. Build in two guides:
- Bleed: Extend backgrounds and any edge-touching color past the trim line by about 0.125 in.
- Safe area: Keep text and important illustration at least 0.25 in inside the trim line.
Create a new layer, draw a thin rectangle at the trim size, and add a second rectangle inset for the safe area. Label the layer "Guides" and hide it before export. You can also turn on Actions → Canvas → Drawing Guide and use Edit Drawing Guide to adjust grid size for centering.
Step 3: Choose a Palette and Background
Fill the background layer first. Pick two or three main colors and one accent, then save them as a palette in the Color panel so every element draws from the same set.
Some practical rules:
- Use the background layer for flat color only, and put textures on their own layer above it.
- Add paper grain or watercolor texture on a separate layer set to Multiply so you can lower its opacity later.
- If you're printing, avoid very saturated neons. They often shift in CMYK.
Step 4: Build the Frame and Illustration
Frames and motifs are what make an invitation feel designed rather than typed.
Frames and borders
- Use QuickShape by drawing a shape and holding at the end of the stroke. It snaps to a clean rectangle, ellipse, or polygon.
- Use Selection → Rectangle to cut and move sections of a frame, then use Snapping (in the Transform tool) so pieces align.
- Duplicate and flip a motif horizontally for symmetry. Mirror it with Transform → Flip Horizontal, or draw on a symmetry guide via Drawing Guide → Symmetry.
Illustration
- Sketch on a low-opacity layer, then ink on a new one.
- Keep each motif (florals, borders, icons) on its own layer or group. Reusing them is easier, and you'll thank yourself if the client asks for a color change.
- Use Alpha Lock to recolor a shape without redrawing it.
Dotted and decorative details
- Pick a non-textured brush, such as one from the inking set, and place dots at even intervals. Imperfect spacing reads as hand-drawn, but wildly uneven spacing looks like a mistake.
Step 5: Set the Type
Typography does more to make an invitation readable than any illustration. Plan a hierarchy before you type:
- Primary: The host or event name, in the largest, most expressive type.
- Secondary: Date and time.
- Tertiary: Venue, RSVP, dress code, and other practical details.
Pair a decorative script or display face for the primary line with a clean serif or sans for everything else. Two typefaces is usually enough, and three is the limit.
To add text, tap Actions → Add → Add Text, type, then use Edit Style to adjust font, size, kerning, tracking, and alignment. You can import your own fonts through Edit Style → Import Font or install them system-wide.
Tips for clean results:
- Increase tracking on small uppercase lines for a more refined feel.
- Keep line lengths short and centered text balanced.
- Test legibility by zooming out to about the size of the printed card. If you can't read the details at that scale, they're too small.
- Avoid placing thin script over busy textures.
Before you export, consider rasterizing text only after proofreading. Rasterized text can't be edited again, so duplicate your text layers and hide the originals as a backup.
Step 6: Proof the Design
Check these before you export:
- Spelling of names, dates, and addresses. Read them out loud.
- Contrast between text and background.
- Whether any text or key artwork crosses the safe-area line.
- That the hidden guide layers are actually hidden.
- Color on a different screen. If the colors look different on a phone and a laptop, expect more variation in print.
If you're sending to a printer, request a physical proof for larger runs.
Step 7: Export for Print or Screen
Tap Actions → Share and choose a format:
- PDF (Best quality): The usual choice for print shops, since it preserves resolution and works well for multipage sets.
- PNG: Best for digital invitations and anything that needs transparency.
- JPEG: Smaller files for messaging, but with compression artifacts.
- PSD: Keeps layers when you want to continue in Photoshop or another layered editor.
- Animated formats (GIF, PNG, MP4, HEVC): Available when you've used Animation Assist, useful for simple loops.
Name your files clearly, such as invite_front_5x7_bleed.pdf, and keep a layered .procreate master for revisions.
Turning a Procreate Invitation into Motion
Motion designers are often asked for an animated invitation: a reveal of the card, a looping border, a short video for social media. Procreate is a good source for the artwork, and the animation usually happens elsewhere.
A practical handoff workflow
- Structure for animation. Keep the frame, motifs, text blocks, and background on separate layers or groups, and name them clearly.
- Export layered. Export as PSD, which opens in After Effects with layers intact, or export key elements as transparent PNGs.
- Rebuild in After Effects. Import as a composition, then animate position, scale, opacity, and trim paths for line work. Keep text as live type in After Effects if you need to tweak copy later, rather than animating a rasterized Procreate version.
- Add depth and texture. Add subtle parallax, paper texture, grain, or light effects in the compositing stage.
- Render. Output at the target platform's aspect ratio. Vertical 9:16 and square 1:1 are the most common for social.
If you need a quick loop without leaving the iPad, Procreate's Animation Assist or Procreate Dreams can handle simple frame-by-frame or timeline animation. For anything that involves precise easing, layered compositing, or a client that will revise copy, After Effects is the more flexible place.
Common Mistakes to Avoid
- Working at screen resolution for print. Always start at 300 DPI.
- Forgetting bleed. Backgrounds that stop at the trim line risk white edges.
- Flattening too early. Keep layered masters until the client signs off.
- Too many fonts or effects. Restraint reads as elegance.
- Skipping the proof. A typo on a hundred printed cards is expensive.
- Not testing colors. CMYK conversion can dull bright blues and greens.
Quick Checklist
- Canvas matches the final trim size plus bleed, at 300 DPI for print
- Palette saved
- Frame, motifs, and text on separate layers
- Clear type hierarchy with a maximum of two or three typefaces
- Safe margins respected and guides hidden
- Proofread, then exported as PDF for print or PNG for digital
- Layered master saved, with PSD or transparent PNGs ready if animation is next
Follow these steps and you'll have a clean, print-ready invitation, plus a layered file you can hand off to motion work whenever a still card needs to move.