How to Make Image Black and White Illustrator
StyleFrame Team8 min read
To make an image black and white in Illustrator, select the artwork, then choose Edit > Edit Colors > Convert to Grayscale. This works on vector objects and on embedded raster images, so embed any linked image first from the Properties panel or Control panel. For more control over tonal range, use Recolor Artwork with Global Adjust, or run Image Trace with a black-and-white preset to get pure two-tone vector shapes.
Before you start: vector, embedded, or linked?
Illustrator treats artwork differently depending on how it was placed, and this determines which method works.
- Vector artwork (paths, shapes, gradients) responds to every color command in the Edit Colors menu.
- Embedded raster images respond to most Edit Colors commands, including Convert to Grayscale.
- Linked raster images do not change when you run color commands. Select the image and click Embed in the Properties panel first. If you need to keep the link, duplicate the file and work on the copy.
Since most Edit Colors commands rewrite the color values directly, they are destructive. Duplicate your layer or save a separate version before converting, especially if a client might ask for the color version back.
Method 1: Convert to Grayscale (fastest)
Use this when you want a quick, no-fuss desaturated version.
- Select the artwork. Press Cmd/Ctrl+A to select everything, or click the specific objects.
- Go to Edit > Edit Colors > Convert to Grayscale.
- Check the result. All fills, strokes, and embedded images are now gray values.
This gives you no sliders, so you are accepting Illustrator's default conversion. For logos, icons, and flat illustrations that is usually fine. For photographs, the result can look flat because there is no way to rebalance tones afterward.
Method 2: Recolor Artwork with Global Adjust
Recolor Artwork is the more flexible route, and it lets you push contrast and brightness while desaturating.
- Select the artwork.
- Choose Edit > Edit Colors > Recolor Artwork, or click the color wheel icon in the Control panel.
- Switch to the Edit view and open the Global Adjust option (the button beside the sliders).
- Drag Saturation to -100. The artwork becomes monochrome.
- Adjust Brightness and Luminosity to shape the tonal range, then click OK.
Because the dialog stays live until you confirm, you can judge the result on canvas before committing. This is the method to use when the converted image looks muddy and you need to rescue some separation between midtones.
Method 3: Adjust Color Balance
Edit > Edit Colors > Adjust Color Balance is a lighter-weight alternative. Check Preview and Convert, set the color mode to Grayscale, and move the black slider until the overall density looks right. It handles fills, strokes, and embedded images in a single pass, which makes it a good fit for multi-object selections where you want one global lightness shift.
Method 4: Map colors to specific grays
When you need deliberate control over which original color becomes which gray (for example, keeping a brand red darker than a brand yellow), build the mapping yourself.
- Open the Swatches panel menu and load a grayscale swatch group from the default libraries (the Print set includes grays).
- Select your artwork and open Recolor Artwork.
- In the Current Colors column, assign each original color to a gray swatch, or edit each color's K value directly using CMYK sliders.
- Confirm with OK.
This is slower, but it is the only method here that gives you a color-by-color tonal decision. It suits illustration and graphic work, where tonal hierarchy matters more than photographic fidelity.
Method 5: Image Trace for true black and white
"Black and white" sometimes means two tones with no grays at all. In that case, trace the image instead of desaturating it.
- Select the raster image.
- Open Window > Image Trace.
- Choose a preset such as Black and White Logo, Sketched Art, Line Art, or Silhouettes for hard-edged results. Use Shades of Gray if you want to keep a tonal range as vector shapes.
- Adjust the Threshold, Paths, and Noise settings, then click Expand to turn the trace into editable paths.
The output is resolution-independent vector art, which is useful for title cards, stencils, cutout-style animation, or shape layers you plan to bring into After Effects. Expect it to look graphic rather than photographic. Photos with soft gradients can break into banding or blotchy shapes unless you push the detail settings up.
Method 6: Change the document color mode
If the whole file should be grayscale, use File > Document Color Mode > Grayscale. This converts the document's colors and changes how new content is created. It is a more global approach than the Edit Colors commands and is best for files intended for single-ink print. Note that switching the document to grayscale means you lose the original color data when you save, so keep a separate color master.
Troubleshooting common issues
- Convert to Grayscale is grayed out or does nothing. The image is probably linked, not embedded. Embed it, or check that you actually have a selection.
- Some objects stay colored. Objects inside locked or hidden layers, clipping masks, or symbols are not always caught by Select All. Unlock layers, use Select > All in All Artboards, or edit symbols and masks individually.
- The result looks flat. Use Recolor Artwork and adjust brightness, or bring the image into Photoshop for Curves or Levels before returning it to Illustrator.
- Gradients and effects look different. Live effects and gradient meshes can shift when converted. Zoom in and check edges, drop shadows, and blends after converting.
- Print output looks unexpected. Confirm the document's color mode and check black values; a grayscale conversion from CMYK does not automatically produce a rich or pure K-only black.
Should you do it in Illustrator at all?
Illustrator is a fine place to desaturate a logo or flat illustration, but if the destination is video, it is often better to leave the artwork in color and do the black-and-white treatment downstream. Keeping the source in color means you can change your mind without rebuilding anything.
In After Effects, put a Black & White effect (Effect > Color Correction) on an adjustment layer, or use Hue/Saturation with Master Saturation at -100. Both are non-destructive, can be keyframed, and sit above every layer underneath. You can pair them with Curves or Levels to shape contrast, or use the Black & White effect's channel mixing to control how reds, yellows, and blues translate to gray. Premiere Pro has equivalent effects, and Nuke's Saturation and Grade nodes give you the same control in a node-based comp. In Blender's compositor, a Hue/Saturation/Value node accomplishes the same thing.
A practical split that works well:
- Use Illustrator's conversion when you need a permanent grayscale asset (a one-color logo, a print piece, a stencil).
- Use compositing-side effects when black and white is a look applied to a shot or sequence.
When you import Illustrator files into After Effects, keep them as layered AI files or convert layers to shapes so you can retain editability, then apply the grayscale treatment on top.
When black and white is a style, not a desaturation
Straight desaturation only removes color. If what you actually want is a black-and-white look (inked line work, high-contrast graphic noir, hand-drawn monochrome), a color-mode conversion will not get you there, because the underlying shapes and textures still look like the original.
This is where Styleframe (styleframe.ai) can sit beside Illustrator and After Effects. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. Its Restyle and Ink-and-Paint tools are reference-driven: you supply a reference image or clip that defines the monochrome style, and the generation follows it. Keyframes drive Frames-to-Video, so you decide where the look begins and ends. Iteration is non-destructive, meaning you can try different references without losing earlier passes.
A practical workflow might look like this:
- Prepare your key artwork or a frame from your footage in Illustrator or After Effects.
- Use Ink-and-Paint or Restyle with a black-and-white reference to produce a stylized monochrome version.
- If you need the subject isolated, run Remove Background; if the output needs to hold up on large displays, finish with 4K Upscale.
- Export an image sequence and bring it back into After Effects or Nuke for final grading, compositing, and delivery.
Because Styleframe exports image sequences, it slots into the same compositing pipeline you already use, and an After Effects plugin is on the way. You keep your grade, your masks, and your edit. The AI step is one controllable stage rather than a replacement for the pipeline. It also helps to remember what it is for: use plain desaturation for clean, predictable conversions, and use style transfer when the monochrome needs to look drawn, inked, or illustrated.
Quick reference
Final tips
Embed linked images before converting, keep a color master, and choose the method based on where the asset ends up. For print and static graphics, Illustrator's built-in tools are quick and reliable. For motion work, keep the color source intact and handle the black-and-white treatment in your compositing app, so every tonal decision stays adjustable until delivery.