How to Make Hollow Brush Procreate
StyleFrame Team8 min read
To make a hollow brush in Procreate, build two brushes that differ only in size, combine them into one dual brush, and set the smaller brush to subtract from the larger one. The larger brush draws the stroke, the smaller one cuts a hole through its center, and what remains is an outline. Alternatively, you can get a similar result by setting the secondary brush's blend mode to Difference and lowering its maximum size.
What a hollow brush is
A hollow brush, often called an outline brush, is a dual brush. Procreate lets you stack two brushes inside one brush in Brush Studio. Each has its own shape, size behavior, and settings, and a combine or blend mode defines how they interact. In a hollow brush, the second brush erases or inverts the middle of the first, so you draw a solid-looking gesture and get an outlined stroke.
This is useful for motion work more often than you might expect: outlined lettering for title cards, bubble-style type, hand-drawn callouts, sticker-like shapes, and stylized frames you plan to animate or trace in After Effects. Procreate is a raster painting tool, so the strokes you make are pixels, not vectors. Plan resolution accordingly.
Method 1: Build a hollow brush with Subtract
This approach gives you the cleanest control, because the two brushes are identical except for size.
Step 1: Create the base brush
- Open the Brush Library and tap the plus symbol to create a new brush. Brush Studio opens.
- Open the Apple Pencil settings and set the opacity pressure response to none. If you skip this, stroke ends can fade and the outline will look uneven.
- Open Properties, then Brush Behavior, and set Maximum Size to 150%.
- Open Stabilization and raise Streamline to its maximum. A smooth stroke matters here, because any wobble in the outer shape shows up directly in the outline.
- Tap Done.
Step 2: Duplicate it and shrink the copy
- Swipe left on the new brush in the library and choose Duplicate.
- Open the duplicate in Brush Studio, go to Properties, and set Maximum Size to 50%.
- Tap Done.
You now have two brushes that differ only in maximum size. The 150% brush is the outer shape. The 50% brush is the hole.
Step 3: Combine them
- Tap the larger brush to select it, then swipe right on the smaller brush so both are selected.
- Tap Combine in the library header.
- Open the combined brush in Brush Studio. You will see both brushes listed in the editor.
- Select the primary (larger) brush, tap the combine mode indicator, and choose Subtract.
The smaller brush is now cut out of the larger one, leaving a hollow center. Test it on a blank canvas. If the outline is too thick or thin, change the ratio between the two maximum sizes. A wider gap between 150% and 50% gives a heavier outline. A narrower gap gives a hairline.
Method 2: Use Difference blend on the secondary brush
If you want to follow a more traditional dual brush workflow, this variant works too.
- Duplicate a standard Procreate brush so you have the original plus two copies.
- Select the two copies and tap Combine.
- Open the combined brush in Brush Studio. The top brush is the primary and the one below it is the secondary.
- Leave the primary alone. Edit only the secondary so the two stay matched.
- Tap the secondary brush, then tap it again to reveal its blend modes. Change Normal to Difference.
- At this point, your strokes may seem to vanish. That is expected, because the two identical brushes cancel each other out.
- With the secondary brush still selected, open Properties, then Brush Behavior, and lower Maximum Size. As you reduce it, the primary brush starts to show as an outline.
In this method, a smaller maximum size on the secondary produces a thicker visible outline. That is the reverse of the intuition from Method 1, so adjust in small steps and test each time.
Tuning the look
Once the basic hollow stroke works, a few settings change its character.
- Outline weight: Control it with the ratio between the two brushes' sizes. Because both scale with brush size, the outline thickens as you draw larger, which keeps proportions consistent.
- Smoothness: Keep Streamline high for clean lettering. Drop it if you want a looser, more hand-drawn feel.
- Pressure response: Removing pressure-driven opacity gives a uniform stroke. Leaving size pressure on gives a calligraphic, varying outline.
- Texture: Swap the shape source on the primary brush for a textured or rough shape. Some community outline brushes ship in textured, bubbly, and normal (untextured) variants for this reason. Be aware that some blend-based outline brushes can create pixelated edges, so test at your final canvas size.
- Fill color: Some community brushes use the primary and secondary colors, where the secondary becomes the middle fill. You can pick that color, or remove it later for a transparent interior.
Fixing common problems
Overlapping strokes show internal lines. Every time you lift the pencil and restart, the new stroke's outline crosses the old one. Either draw each shape in one continuous stroke or erase the overlapping segments afterward. A cleaner habit is to put each new shape on its own layer, so the strokes don't interact.
The brush looks inverted or the interior color is wrong. This usually comes from blend mode behavior. If the middle color comes out darker or lighter than expected, check which brush is primary and which is secondary, and check whether the middle color was set to something that sits behind or in front of previous strokes. Some users report that downloaded brushes behave differently after Procreate updates, so rebuilding the brush from scratch is often faster than debugging someone else's.
The stroke disappears entirely. With the Difference method, this is normal until you lower the secondary brush's maximum size. With Subtract, check that the two sizes actually differ.
Ragged or pixelated edges. Raise canvas resolution, smooth the shape source, or turn Streamline up. Pixelation is a known tradeoff with some blend-based outline setups.
No hold needed. Some brushes require you to keep the pencil down to maintain the shape. A well-built dual brush avoids this, because the shape is defined by the two brushes rather than a hold-to-snap behavior.
Bringing hollow brush artwork into a motion pipeline
If you are making outlined type or hand-drawn shapes for animation, treat Procreate as an asset source rather than a finished step.
- Work on a transparent background. Hide the paper color before export so the outlines carry alpha.
- Separate elements by layer. One layer per word, shape, or character piece makes it much easier to animate individual parts in After Effects.
- Export PNG or layered PSD. PSD preserves layers. PNG is better for flat, single-element assets.
- Paint larger than you need. A raster outline can't scale up cleanly. If a title will push in during the animation, draw at the largest size it will reach.
- Convert to shapes when you need clean scaling. For logos or outlines that must stay crisp, trace in a vector tool using its image trace feature, then animate the vector paths.
Once in your animation software, you can animate trim-style reveals using masks, add edge-distortion effects for boil, or drive a write-on with a matte layer. Hollow strokes also work well as mattes for glows and light effects.
Where Styleframe fits
A hollow brush gives you a single illustrated look, drawn by hand, one asset at a time. Once you want that look across moving footage or a sequence of frames, hand-drawing every frame stops being practical. This is where Styleframe, an AI video and motion tool built for artistic control, can sit alongside your Procreate work.
You can use your own hollow-brush artwork as a style reference, so the look comes from your drawing rather than a generic preset.
Styleframe doesn't replace the hand-drawn brush work. It extends a look you defined yourself, which is the point if you care about authorship and consistency.
Quick checklist
- Create a base brush, remove pencil opacity pressure, set Maximum Size to 150%, and raise Streamline.
- Duplicate it and set the copy's Maximum Size to 50%.
- Combine the two and set the combine mode to Subtract (or use Difference on the secondary and reduce its maximum size).
- Test on a blank canvas and adjust the size gap for outline weight.
- Draw each shape on its own layer to avoid overlap lines.
- Export with a transparent background for After Effects, and paint at the largest size you'll need.
Once you understand that a hollow brush is only two matched brushes with one cutting into the other, you can build variations quickly: thin technical outlines, chunky sticker strokes, or rough textured edges. Save each as its own brush in a dedicated set so your lettering and illustration styles stay consistent across projects.