How to Make Halftone in Procreate
StyleFrame Team8 min read
To make halftone in Procreate, open your layer and tap Adjustments → Halftone, then drag your finger right to increase the dot size and choose Full Color, Screen Print, or Newspaper. Tap the Adjustments icon again to commit. For more control over where dots land, use halftone brushes with a grain texture, or isolate the effect on its own layer with Alpha Lock. Both methods work, and the one you pick depends on whether you want a fast global effect or hand-placed shading.
Method 1: Use the built-in Halftone adjustment
This is the fastest route and needs no extra brushes or downloads.
- Select the layer you want to affect. The adjustment applies to a single layer, so put your artwork on its own layer first.
- Tap Adjustments and choose Halftone.
- Slide your finger right across the canvas to increase the halftone screen size, or left to reduce it. The bar at the top shows the screen size as a percentage. At 0%, nothing is applied.
- Pick a mode at the bottom of the screen (covered below).
- Commit. Tap the Adjustments icon again to apply and exit, or tap the canvas and choose Apply to commit and stay in Halftone.
The "screen" is the size and spacing of the dots. A larger percentage means bigger, more obvious dots. Smaller values read as a subtle print texture, while large values give you a bold pop-art look.
The three halftone modes
- Full Color produces a color halftone and keeps the original artwork's color behind the dots. It resembles magazine printing.
- Screen Print produces a color halftone with white showing through the background, which is closer to a screen-printed look.
- Newspaper produces a greyscale halftone, which suits black-and-white newsprint styling.
Pick the mode before you commit.
A caveat for print work
Procreate's halftone is a digital effect. If you plan to physically screen print your art, Procreate's own guidance is to let the printer generate the halftone through the physical process instead of baking it in. For motion and screen-based work this doesn't matter, but it's worth knowing if your artwork will also go to print.
Method 2: Isolate halftone to specific areas
The Halftone adjustment affects a whole layer, which leads some people to think they need a halftone brush set to shade only parts of an image. You can get a localized effect with layers instead.
A reliable workflow:
- Draw your line art on one layer.
- Block in flat color on a separate layer beneath it.
- Duplicate the color layer, or create a new layer for the area you want textured (a shadow, a cheek, a background shape).
- Turn on Alpha Lock for that layer so painting stays within the existing shape.
- Fill with a flat or gradient tone. Gradients matter here because halftone converts tonal values into dot size, so a smooth ramp gives you dots that shrink and grow.
- Apply Adjustments → Halftone to that layer only.
Because you apply Halftone to each layer separately, you can use big coarse dots on a background and finer dots on a character. Layering this way also lets you treat each element on its own, which matters when a director asks for "slightly smaller dots" late in the process.
For soft transitions between two colors before the halftone pass, Gaussian Blur on the layer works well. Blur first, then halftone, and the dot sizes will graduate along the blend.
Method 3: Use halftone brushes and grain
Halftone brushes use a dot-pattern grain, so you paint shading directly where you want it. You can buy commercial sets or build your own by loading a dot texture as the grain source in Brush Studio.
The benefit is hand-placed control: you decide exactly where the tone builds up, with no need to prep a gradient first. The tradeoff is that you have to manage grain scale yourself.
Fix misaligned dots by typing the grain scale
A known quirk in Procreate can ruin the look of brush-based halftones. If you resize the halftone with the Grain Scale slider, the displayed values are rounded whole numbers, while the actual values underneath are fractions. Strokes made at "the same" size can end up with slightly different dot sizes, and overlapping strokes won't line up into one clean pattern.
The fix is to enter the number manually:
- Double-tap the halftone brush in the Brush Library to open its settings.
- Open the Grain tab in Brush Studio.
- Tap the percentage number above the Scale slider.
- Type the exact percentage you want.
Use the same typed value every time you want strokes to align. If you're building a piece across multiple sessions, write that number down.
Pressure-sensitive halftone shading
A community trick makes a halftone brush respond to pressure. Rather than scaling the dots, build a grain with tonally graduated dots (each dot has a gradient from light to dark). Then set the brush so opacity increases with pressure. The dot size doesn't actually change, but as you press harder, the darker parts of each dot start to register, so the dots appear to grow. It's a hack, and results vary between brushes and Procreate versions, but it gives you expressive, inked-looking shading.
Settings that make halftone look right
- Work large. Choose a canvas with enough pixels for your final delivery. A 300 DPI canvas is a common starting point, but for video, pixel dimensions matter more than DPI. If you're delivering 4K, build or export at a size that avoids upscaling later.
- Keep dot size consistent across the piece. Mixed dot sizes read as an intentional style only if the variation is deliberate. Random variation looks like an error.
- Use limited palettes. Halftone looks most authentic with a few flat inks. Heavy gradients on top of halftones muddy the effect.
- Commit late. Keep an unflattened copy of the file. Once you apply the effect and merge layers, you can't change the dot size.
Taking halftone art into a motion pipeline
If you're building a halftone look for animation, how you export matters more than how you draw.
Export clean assets. Export layers or elements as PNGs with transparency so you can rebuild the composition in After Effects, Nuke, or any compositor. Hide the background layer before exporting.
Avoid resampling the dots. Halftone patterns are high-frequency, so scaling, rotating, or sub-pixel moving a baked halftone layer can create moiré or soften the dots. In After Effects, check your layer's quality and sampling settings, and consider keeping scale at 100% where you can. If you need to zoom or push in, it's often cleaner to export from Procreate at a larger size and scale down than to scale up.
Know when to generate halftone in the compositor. For animated footage, applying a halftone effect procedurally keeps the pattern consistent across frames and lets you tune it live. Baked halftone from Procreate is best for stills, key art, backgrounds, and style references.
Watch for temporal shimmer. A halftone grid that's locked to the screen while the subject moves can look like the image is moving behind a screen door. A grid that moves with the subject looks more like printed paper. Decide which feel you want before you animate.
Where Styleframe fits
Procreate is excellent for designing a halftone look on a single frame. Extending that look across moving footage is a different problem. This is where Styleframe, an AI video and motion tool, can sit beside your Procreate and After Effects workflow.
A practical approach:
- Use your Procreate frame as the style reference. Reference-driven style transfer lets you supply a style image, such as your halftone illustration, and a source video clip, and the generation follows your references rather than a text-only guess. Check results against your reference, since fine dot patterns are demanding for any generative tool, and plan to refine in compositing if you need an exact grid.
Troubleshooting common halftone problems
The effect looks too subtle. Drag further right on the Adjust Halftone bar. Remember that at 0% nothing is applied, and the effect depends on tonal range in the layer, so flat, mid-value fills won't show much variation.
Everything on the layer turned to dots. Halftone applies to the whole layer. Split the artwork into separate layers and apply it only where you want it.
Brush dots don't line up between strokes. Re-enter the grain scale by typing the percentage rather than using the slider.
Dots shimmer or alias in video. Avoid scaling the baked layer in your compositor, export at higher resolution, or generate the halftone procedurally in post.
The halftone is meant for physical printing. Skip the digital effect and let your printer produce the halftone as part of the physical process.
Quick workflow summary
- Sketch and ink on separate layers.
- Block flat colors, then add gradient tone layers where you want shading.
- Apply Adjustments → Halftone per layer, choosing Full Color, Screen Print, or Newspaper.
- Use halftone brushes with a typed grain scale if you want hand-placed shading.
- Export clean PNGs at your delivery resolution and rebuild in After Effects or Nuke.
- For animated versions, either generate halftone procedurally in post or use your Procreate frame as a style reference in a tool like Styleframe, then composite as usual.
Once you understand that halftone is just tonal values converted to dot size, you can design the look in Procreate and push it as far as your pipeline needs.