How to Make Halftone Brush Procreate
StyleFrame Team8 min read
To make a halftone brush in Procreate, create a seamless, square dot pattern, import it as the grain source in Brush Studio, and set the grain to Texturized so the dots stay fixed to the canvas as you paint. Then type an exact grain scale percentage, because the slider shows whole numbers while the underlying value can be a fraction, which can misalign the dots. For pressure-sensitive shading, build the pattern from tonally graduated dots so harder strokes reveal darker tones instead of enlarging the dots.
Pick the Right Halftone Method First
Procreate offers two ways to get halftone, and they solve different problems.
The Halftone adjustment (Adjustments → Halftone) converts a whole layer or image into dots. You drag across the screen to set the screen size as a percentage, then choose Full Color, Screen Print, or Newspaper. Full Color keeps the original colors behind the dots, similar to magazine printing. Screen Print shows white through the background. Newspaper produces a greyscale halftone. It is fast, but it is a digital effect applied to pixels you have already painted. Procreate's own documentation notes that if your goal is physical screen printing, the printer should generate the halftone in the physical process rather than relying on this effect.
A halftone brush gives you dots as you paint. You shade by hand, build tone gradually, and control where the pattern appears. If you want that hands-on feel, or you want halftone only in certain areas, a custom brush is the better route.
What You Need Before Building the Brush
- A square dot pattern, black on white, that tiles cleanly. A 2048 × 2048 px canvas is a sensible size if your device supports it.
- Procreate's Brush Studio (double-tap any brush, or tap + in the Brush Library to create a new one).
- Optionally, a way to generate the dots outside Procreate. After Effects' Color Halftone effect or any vector/raster tool with a dot-screen filter works well, and you can airdrop or save the result to your iPad.
You can also generate the pattern inside Procreate. Fill a layer with a gradient, apply Adjustments → Halftone in Newspaper mode, and flatten the result. Check that the edges repeat before using it as a grain.
Step 1: Create the Dot Pattern
The quality of the brush depends almost entirely on this file, so spend your time here.
- Choose a dot grid. A classic halftone uses dots on a 45° grid. A square 0° grid reads more graphic and modern. Decide this now, since rotating later can introduce artifacts.
- Pick a single tone or a graduated one. A uniform dot size gives you flat, comic-style texture. Dots with varied tonal values (some solid black, some grey) give you the pressure-based behavior described in Step 4.
- Keep it grayscale. Procreate reads grain by luminance, so black areas deposit paint and white areas hold it back.
- Make it tile. If the dots at the left edge don't continue into the right edge, you will see seams in your strokes. Count your dots so a whole number fits across the canvas.
- Keep it high contrast for crisp dots. Soft, blurry edges produce muddy results once the scale shrinks.
Step 2: Build the Brush in Brush Studio
- Open the Brush Library and tap + to create a new brush.
- Go to the Grain tab. Under Grain Source, tap Edit, then import your pattern (from Photos, Files, or a copied layer).
- Set the grain behavior to Texturized. This locks the pattern to the canvas, so overlapping strokes reveal the same dot grid rather than stacking offset dots. That is what makes the result look like a real screen.
- Under the Shape tab, use a simple solid shape. A hard round or square is fine. Because the grain does the work, a complicated shape just adds noise.
- In Stroke Path, lower the spacing so strokes are continuous rather than stamped.
- In Apple Pencil, decide how pressure behaves. For flat halftone fills, reduce or remove pressure effects on size. For tonal build-up, link pressure to opacity (see Step 4).
- Name the brush and test it on a scrap layer.
Step 3: Scale the Dots Precisely
This is where most homemade halftone brushes go wrong. If you drag the Grain Scale slider, Procreate shows whole numbers while the underlying value can be a fraction. The result can be slightly different dot sizes, and the dots then fail to line up when strokes overlap.
The fix is simple:
- Open the brush and go to the Grain tab.
- Tap the percentage number above the Scale slider.
- Type the value you want.
Record your values. If you build a set of halftone brushes (fine, medium, coarse), use deliberate numbers such as 50%, 100%, and 200% so the sizes relate to each other and mix cleanly across layers.
Also keep your canvas resolution consistent. Dots that look right at 300 DPI on one canvas will read very differently on a smaller or larger one, so test on the canvas size you actually deliver.
Step 4: Make the Brush Respond to Pressure
A standard grain brush gets bigger or denser as you press, which makes dots swell and break the screen. A community-developed workaround avoids this by using tonally graduated dots in the grain. With opacity linked to pressure, the dot size stays constant while darker tones begin to register as you press harder, creating the illusion that dots are growing.
To try this:
- In your pattern file, vary the dot values so some are light grey and others near-black.
- In Brush Studio's Apple Pencil settings, map pressure to opacity rather than size.
- Keep brush size constant, or map tilt to size if you want a separate control for width.
- Test with light, medium, and hard strokes. If everything jumps from nothing to full black, widen the tonal range of your dots or soften the pressure curve.
Some brush makers extend this further with line-based halftones: pressure controls density and opacity, tilt controls size, and rotating the grain switches between horizontal and vertical lines. Changing grain size then adjusts line frequency. The same pattern-first approach applies. Swap dots for lines in your source file.
One caution from community discussion: at least one user reported that a downloaded brush built this way did not work in their version of Procreate. Test any brush after updates.
Isolate Halftone to Specific Areas
You do not always need a brush. A practical approach combines the built-in effect with layer controls:
- Put the area you want to treat on its own layer.
- Turn on Alpha Lock so changes only affect existing pixels.
- Fill or shade the area with flat color or a gradient.
- Apply Adjustments → Halftone to that layer only.
- Repeat on other layers with different screen sizes.
This answers a common assumption that halftone has to cover the whole image. With separate layers, you can have a coarse dot on a background, a fine dot on a face, and clean flat color elsewhere.
Fix Common Problems
- Dots look uneven or smeared. Check that grain behavior is Texturized, not Moving, and that spacing is low.
- Overlapping strokes create odd patterns. The grain scale likely differs between brushes. Retype the percentage.
- Moiré when exporting or scaling. Dot patterns interfere with the pixel grid of whatever displays them. Export at the final delivery resolution and avoid resizing the artwork afterward.
- Edges look soft. Your source pattern is probably too low-res or blurred. Rebuild it at a higher resolution with crisp contrast.
- The pattern seams. The tile is not seamless. Fix the dot count across the canvas.
Bringing Procreate Halftone Into a Motion Pipeline
For motion designers, a halftone brush is usually the start of a pipeline rather than the end. A few practical habits help:
- Export layers separately as PNG with transparency, with halftone shading, line work, and flat color on distinct layers, so you can animate or offset them independently in After Effects.
- Keep dot size consistent across frames. If you rescale a halftone layer in After Effects, the dots scale with it and look wrong against other elements. Build the artwork at its final size, or regenerate the screen with the Color Halftone effect for live elements.
- Decide where the halftone lives. Painted halftone suits hand-drawn stills and textures. Procedural halftone in After Effects, Nuke, or Blender suits footage and 3D renders, where the pattern must stay stable as the image moves.
Where Styleframe Fits
Styleframe is not a brush tool, and it does not replace the steps above. It becomes useful once you have a halftone look you like and want to carry it through motion. You can use a halftone-treated frame as a reference image so the style carries over to other footage or generated frames. Your compositing workflow stays where it is. Whether a stylized sequence holds the dot pattern exactly as you painted it will depend on your reference and settings, so check the result in your comp.
Quick Checklist
- Choose the Halftone adjustment for whole-layer effects and a custom brush for hand-built shading.
- Build a seamless, high-contrast, grayscale dot pattern.
- Import it as grain and set it to Texturized.
- Type the grain scale percentage instead of dragging.
- Use tonally graduated dots and pressure-to-opacity for pressure-sensitive behavior.
- Isolate effects with layers and Alpha Lock.
- Export at final resolution and test in your compositing app.
Halftone brushes reward patience at the pattern stage. Once your dot file and scale values are right, the brush behaves predictably, and the result carries cleanly into whatever motion or compositing work comes next.