How to Make Hair in Procreate
StyleFrame Team8 min read
To make hair in Procreate, block in the hair silhouette on its own layer, fill it with a dark base color, then build up mid-tones and highlights on separate layers using strand-shaped brushes that follow the direction of hair growth. Blend the starting and ending points of your strokes with a soft brush, then add thin flyaway strands and a few sharp highlights on top. Working from dark to light, in layers, is what gives hair its depth and keeps it editable.
Before You Paint: Understand How Hair Behaves
Hair painted as a pile of random lines looks flat. Hair painted as grouped masses with a clear direction looks real. Spend two minutes on structure before you open a brush.
- Find the origin. Hair grows from a part, a crown, or a hairline. Every stroke should flow away from that point. Mark it lightly on a sketch layer.
- Think in clumps, not strands. Group hair into chunks, like ribbons or banana shapes, that overlap each other. More clumps mean more detail; fewer mean a more stylized look.
- Know your hair type. Straight hair lies flat to the scalp with long, glossy highlights. Wavy hair follows an S-curve. Curly hair forms spirals with volume. Coily hair has tight, dense curls where overall silhouette and texture matter more than individual strands.
- Use a reference. A photo or a frame from a film you admire will tell you where the light breaks across the hair mass faster than guessing.
If you're drawing a character, sketch the whole head first, including the bald skull. Hair sits on top of the skull with thickness, and skipping this step is why many painted heads end up with hair that's too small or too flat.
Step 1: Set Up Your Canvas and Layers
Create a canvas at the resolution you'll actually need. If the artwork will end up in a video timeline, work at or above your final frame size so you won't need to upscale later. Then build a simple layer stack:
- Sketch layer on top, set to Multiply or lowered to around 30% opacity.
- Highlights layer(s) above the shadows.
- Shadow/mid-tone layer clipped to the base.
- Base color layer for the hair silhouette.
- Flyaways layer at the very bottom or top, depending on whether the strands sit behind or in front of the hair mass.
Name the layers. It feels fussy for a single illustration, but it saves a lot of time if you later export the layered file for compositing.
Step 2: Block in the Silhouette and Base Color
Draw the overall hair shape with simple lines. Skip detail for now. Make it a closed shape so you can fill it quickly, either by dragging a color into the outline (ColorDrop) or by painting inside a selection.
Fill with a dark base color, not the midtone. Hair is almost always darkest near the roots and in the shadowed recesses between clumps. Starting dark means you won't need to add heavy shadows later; you'll just paint light on top of it.
Clean up the edges at this stage. Use the eraser or a selection to define the outer silhouette, but leave it slightly imperfect. A perfectly smooth outline looks like a sticker.
Step 3: Add Mid-Tones With Strand-Shaped Brushes
Pick a color slightly lighter than the base and a brush that produces tapered, hair-like strokes. Procreate's default brushes can do this: the 6B Pencil for sketching, and the Round Brush or Brush Pen for coloring and rendering. Custom hair brush packs make it faster, but they aren't required.
Make your strokes in the direction of hair growth, using a quick flick that tapers at both ends. Pencil pressure helps. Use larger brush sizes for thick clumps first, then smaller sizes as you go.
A few practical tips:
- Vary the length and spacing of strokes. Evenly spaced parallel lines look like a comb.
- Overlap clumps so that one passes in front of another. This is what creates the sense of volume.
- If the color feels too dark or too saturated, turn on Alpha Lock for that layer and sweep over it with a soft airbrush in a lighter color. This shifts the whole layer's color without touching the shapes.
Step 4: Build Form With Light and Shadow
Hair is a 3D form made of planes. Where the form turns toward the light, it's brighter; where it curves away, it's darker. Without this, even detailed strands read as flat.
A reliable approach:
- Make a new layer above the base, set it to Multiply, and clip it to the base layer.
- Choose a color from the base family and paint shadows where the hair turns away from the light or sits under another clump (beneath the part, behind the ear, in the gaps between locks).
- Add a new layer for highlights. Pick a lighter shade of the base color and place it where light hits the most: the top of the head, the crest of a wave, the outer curve of a curl.
Decide early whether your hair is glossy or soft. Glossy hair often has defined highlight bands with hard edges. Soft or matte hair has broader, diffused highlights. Using hard edges only in a few places keeps the eye from jumping around.
Step 5: Blend the Transitions
Once your strokes are placed, soften the junctions without destroying the strand structure.
- Use a soft blending brush.
- Blend the start and end points of strokes, not the middle. This lets strands melt into the surrounding color while still reading as individual strands.
- Avoid blurring the entire hair mass. A fully blended head of hair looks airbrushed and loses its texture.
If you want sharper control, use Selection to isolate a clump, then blend within it so you don't contaminate neighboring areas.
Step 6: Add Fine Strands and Flyaways
This is the step that turns "decent" into "convincing."
- Switch to a thin, pressure-sensitive brush and a light shade of the hair color.
- Add thin strands over the top of the hair mass, following the flow, to break up the edges of the clumps.
- On a separate layer, add flyaways and baby hairs along the hairline and silhouette. Use short, curved strokes. A few well-placed ones are better than a halo of them.
- Add a handful of the brightest highlights last, sparingly. Pure white or near-white strands in two or three spots are enough.
Keep flyaways on their own layer so you can lower their opacity or remove them if they get busy.
Step 7: Check Values and Color
Squint at your canvas or temporarily desaturate it. The hair should still read as a form with a clear light side and dark side. If it looks like a flat gray mass, you need more contrast between the shadow and highlight layers.
Then adjust color. Hair is rarely a single hue. Brown hair often picks up warm orange in highlights and cooler, desaturated tones in shadow. Adjust the saturation of the highlight layer, or paint a glow along the edges on its own layer.
Common Mistakes to Avoid
- Blunt, triangular ends. Strands taper. Even in stylized work, vary the ending shapes.
- Perfectly parallel lines. Add slight overlap, crossing, and variation in thickness.
- Starting with the midtone. Skipping the dark base makes hair look pale and shallow.
- Over-blending. Keep some visible strand texture.
- Ignoring the skull. Hair should have volume and sit off the head, not painted flat on it.
Taking Procreate Hair Into a Motion Pipeline
If you're a motion designer or animator, you're probably not just making a static illustration. If you export your layers as separate elements, you can bring the hair into After Effects, Photoshop, or Nuke. A few habits make that smoother:
- Keep hair, face, and background on separate layers so you can move or parallax them.
- Paint a bit beyond the final silhouette where hair will overlap other elements.
- Save flyaways as their own layer for secondary animation, such as a subtle wiggle driven by an expression or puppet pin.
- Work at final delivery resolution to avoid softness after scaling.
Many artists use Procreate to design the hair look and then animate elsewhere.
Where Styleframe Fits
Once your hair design exists as painted frames, can help carry that look into motion without giving up control. It's an AI video and motion tool built around reference images, video clips, and keyframes rather than one-click generation. With Frames-to-Video, you can set keyframes, such as two or more Procreate paintings of the same character with different head positions, and generate the movement between them. Restyle and Ink-and-Paint use a reference to transfer a painted or inked look onto footage or other frames, which is useful if you want a live-action or 3D render to carry the brushwork of your Procreate hair. Remove Background can isolate a character from a painted plate, and 4K Upscale prepares the result for delivery.
Iteration is non-destructive, so you can try different keyframes or references without overwriting earlier versions. Output exports as image sequences, which drop straight into After Effects or Nuke for compositing, and an After Effects plugin is on the way. You keep your existing pipeline and use Styleframe for the stage where a still design needs to move.
A Quick Workflow Recap
- Study a reference and identify the part, flow direction, and hair type.
- Sketch the head and the overall hair shape.
- Fill the silhouette with a dark base color.
- Add mid-tone strands that follow the flow.
- Paint shadow and highlight layers to define form.
- Blend start and end points of strokes.
- Add fine strands, flyaways, and a few sharp highlights.
- Check values, adjust color, and keep layers organized for export.
Hair rewards patience and layering. Each pass, from base to midtone to highlight to flyaway, adds a bit of believability, and a clean layer structure means your painting can survive the trip from Procreate into a full motion workflow.