How to Make Grass in Procreate
StyleFrame Team8 min read
Making grass in Procreate comes down to three steps: block in a base of mid-to-dark greens, paint blades in layered clusters using a tapered brush or a custom grass brush, and add light and depth with highlights and shadows. Work from back to front on separate layers so the grass reads in depth and stays easy to edit. For a faster, more natural result, build a custom brush in Brush Studio with Color Jitter and scatter, so every stroke lays down varied blades instead of one repeated stamp.
What You Need Before You Start
You don't need a special brush pack to paint convincing grass, but a few settings are worth checking first.
- A canvas sized for the final use. If the grass will end up in an After Effects comp, match the comp's aspect ratio and make the canvas at least as large as your delivery resolution. Painting at 1920×1080 and scaling up later will soften the fine blade detail.
- A tapered brush. Procreate's built-in brush library includes brushes with pressure-sensitive taper. A stroke that thins at the tip gives you a natural blade shape.
- A limited palette. Pick five or six greens: a dark shadow green, two mid-tones, a light green, and a warm yellow-green for highlights. A few off-greens (a blue-leaning green and an olive) keep the field from looking monochrome.
- Streamline turned up slightly. In the brush settings, a little Streamline smooths the flick of each blade so curves look confident rather than shaky.
Step-by-Step: Paint Grass in Procreate
1. Block In the Base
Create a new layer and fill the grass area with your darkest mid-green. Don't worry about blades yet. The base establishes the shadowed ground that shows between the blades, and it stops the canvas from looking bare where your strokes are sparse.
Then add loose patches of the other greens on the same layer, using a big soft or textured brush. Place darker patches where the grass would be shaded (under trees, at the base of objects, in the foreground) and lighter patches where the sun lands. These patches set the lighting before any detail exists, which makes the later steps much easier.
2. Paint the Back Layer of Blades
Make a new layer above the base and select a tapered brush at a small size. Start at the horizon or the farthest part of the grass and paint short, slightly curved flicks upward from the ground. Keep these:
- Small, because distance compresses detail.
- Darker and cooler, because atmospheric perspective pushes far objects toward the background color.
- Dense, because distant grass reads as texture rather than individual blades.
Flick from the base of the blade outward in one confident motion. Slow, hesitant strokes produce wobbly, stiff-looking grass.
3. Add Midground Layers
Create another layer and increase the brush size a little. Use your mid-tone greens and paint longer blades that arc in varied directions. A few rules help:
- Group blades in clusters of three to seven, with one or two taller blades per cluster.
- Vary the angle. Real grass leans with wind and weight, so avoid perfectly vertical strokes.
- Let some blades cross each other. Overlaps create depth.
- Leave gaps. Solid coverage looks like a green carpet; gaps let the dark base show through and suggest volume.
You can pick colors directly from the canvas using the Color Picker (tap and hold) so new blades stay consistent with the patches below.
4. Paint Foreground Blades
The foreground layer gets your largest brush size, the highest contrast, and the most deliberate shapes. Paint fewer, larger blades with clear tapers and slight bends. Use your lightest green and the warm yellow-green on the sun-facing edges, and add a darker stroke along the shadow side of some blades.
Foreground blades are what the viewer actually inspects, so spend your time here. If a blade looks wrong, undo with a two-finger tap and repaint it. Fixing one stroke is faster than fixing it after it's merged.
5. Add Shadows and Highlights
Use Alpha Lock or a clipping mask on a new layer to add lighting without damaging the blades beneath.
- Shadows: Set a dark, saturated green or blue-green on a Multiply layer and paint in the base of clumps, under overlapping blades, and in the cast shadows of any objects on the grass.
- Highlights: Use a light yellow-green on an Add or Overlay layer for tips and edges facing the light source. Keep highlights sparse so they stay believable.
- Rim light: If your scene is backlit, paint thin bright edges along blade outlines and let the interior fall darker.
6. Blend and Finish
Add a soft, low-opacity airbrush haze near the horizon to push distant grass back. Add a few stray elements to break uniformity: clover leaves, tiny flowers, dry blades, seed heads. A small amount of Gaussian Blur on the farthest layer can imitate depth of field. Keep it subtle, or the grass will look smudged instead of out of focus.
Build a Custom Grass Brush
If you paint a lot of foliage, a custom brush saves hours. In Brush Studio, duplicate a basic tapered brush and adjust:
- Shape Source: Use a hand-drawn cluster of three to five blades as the stamp, rather than a single blade.
- Stroke Properties: Increase spacing so the stamps don't pile into a solid mass.
- Scatter: Introduce rotation and position scatter so each stamp points in a slightly different direction.
- Color Dynamics: Add Stamp Color Jitter, with small Hue, Saturation, and Brightness variations, so each stamp shifts subtly between greens.
- Apple Pencil dynamics: Map pressure to size and opacity for natural variation.
Use the custom brush for the back and midground layers, and still hand-paint the foreground. A stamp brush speeds up coverage, but repeated stamps become noticeable up close.
Realistic vs. Stylized Grass
The approach changes with the look you want:
- Realistic: Use many small blades, subtle color variation, correct atmospheric perspective, and soft light. Reference photos help, especially for how grass bends and overlaps.
- Stylized or cartoon: Use fewer, larger shapes with clean edges. Think in clumps rather than blades, limit your palette to three or four greens, and use flat shadows.
- Ink and flat color: Paint a flat green fill, then add line-drawn blades with a consistent pen, with minimal shading.
Decide the style before you pick brushes. Mixing a hyperreal texture brush with flat-shaded shapes is one of the most common reasons grass looks off.
Common Mistakes to Avoid
- Uniform blade direction. Everything leaning the same way looks combed.
- Single flat green. Without value and hue variation, grass reads as a texture fill.
- Evenly sized blades. Scale should change with distance.
- Detail everywhere. Detail in the foreground and simplification in the distance is what produces depth.
- Painting on one layer. You lose the ability to tweak lighting, shift clumps, or animate parts separately.
Taking Procreate Grass Into a Motion Workflow
If your grass is going into a motion piece, paint with animation in mind from the beginning.
Keep foreground, midground, and background grass on separate layers, then export as a layered PSD or as individual transparent PNGs. In After Effects, you can place each layer at a different Z position or scale for parallax, and add subtle movement with Turbulent Displace, the Puppet Pin tool, or a wiggle expression applied to a mesh warp. Slight, slow motion usually looks better than large sways.
Procreate also has Animation Assist for frame-by-frame work. A short loop of blades swaying in the wind is feasible, but it's labor-intensive, so many artists reserve it for hero elements and fake the rest with layer-based motion.
Where Styleframe Fits
Procreate gives you complete hand-painted control over a still. Styleframe, an AI video and motion tool built for artistic control, can help extend that still into motion without replacing your painting.
Your compositing workflow stays intact: Procreate for painting, an AI motion tool such as Styleframe for motion and style work, and your compositing software for the final composite.
Quick FAQ
What's the best brush for grass in Procreate? A tapered, pressure-sensitive brush from Procreate's brush library works well for hand-painted blades. For speed, build a custom cluster brush in Brush Studio.
How do I make grass look less flat? Use at least three layers (back, mid, front), vary value and hue, and keep your darkest darks and lightest lights in the foreground.
Can I animate grass made in Procreate? Yes. Use Animation Assist for frame-by-frame loops, or export layers and animate them in After Effects with displacement, puppet tools, or parallax.
Should I paint each blade by hand? Only in the foreground. Use texture or custom brushes for distant grass and hand-paint focal clumps for believability.
Treat grass as a lighting and layering problem rather than a drawing problem. Once base values, depth layers, and a few well-placed foreground blades are in place, the field reads convincingly, whether it stays a still or becomes part of a moving shot.