How to Make Gradient Text in Procreate
StyleFrame Team8 min read
The fastest way to make gradient text in Procreate is to type your text, add a new layer above it, set that layer as a clipping mask, and fill it with a gradient. You can paint the gradient with a large Soft Airbrush or blend bands of color with Gaussian Blur. Because the clipped layer only shows inside the letterforms, you can redo the gradient without touching the type. If you plan to animate the result, export it as a transparent PNG or layered PSD and bring it into After Effects.
What Procreate Can and Can't Do for Gradient Text
Procreate has no one-tap gradient fill for type. Gradients come from painting, blurring, or remapping color on a layer. That's fine for lettering, posters, and style frames. It's less suited to type that must stay live and editable for a motion project, which is covered later.
Prepare these before you start:
- Canvas size: Procreate is raster, so a small canvas gives you soft, blurry type. Start at the final delivery size or larger. For video, match your project's resolution; for a standalone title graphic, a tighter custom canvas works.
- Color profile: Your Procreate canvas and your After Effects project may use different color profiles, so expect possible color shifts on import. Check the swatches against your comp early.
- Text: Open Actions (the wrench icon), choose Add, then Add Text. Type your words, pick a font, and tap Done. Heavy, wide letterforms show gradients far better than thin scripts.
Method 1: Clipping Mask With a Soft Brush (Best All-Rounder)
This approach keeps the text as a live layer, so you can still edit the wording or font afterward.
- Add your text and position it.
- Open the Layers panel and tap + to create a new layer. It should sit directly above the text layer.
- Tap the new layer and choose Clipping Mask. A small arrow appears, showing it's clipped to the text.
- Pick your first color and fill the whole clipped layer, either by dragging the color swatch onto it or by using a large brush.
- Pick the second color. Choose Soft Airbrush from the Airbrushing set and make it very large.
- Start with the stylus off the canvas, then sweep across the text in one slow, steady stroke. Repeat, layering more colors if you like.
- If the blend looks uneven, use a low-opacity Smudge tool or a light Gaussian Blur on the clipped layer.
The key habit is painting on the clipped layer, not on the text. If you hate the result, clear the layer and try again while the text stays untouched.
Method 2: Blurred Color Bands for Precise Control
Soft brushes are quick but hard to repeat exactly. Bands plus Gaussian Blur give you smooth, controllable transitions, and it's a good way to get a clean linear gradient.
- Create the clipped layer as above.
- Fill it with horizontal or vertical bands of color, one per stop in your gradient. Selection tool with Color Fill makes straight edges easy to draw.
- Open Adjustments > Gaussian Blur, choose Layer, and slide your pen across the screen until the bands melt together.
- Nudge the layer with the Transform tool to reposition the gradient across the letters.
Make the color bands extend well beyond the text edges. A blur fades toward the layer's boundary, and if the colors stop at the edge of your word, the outer letters may look washed out or transparent. Extending the fills past the text avoids this.
For a radial gradient, use circles instead of bands: a large outer circle, a smaller one inside it, and a final one in the center. Then blur.
Method 3: Rasterize and Alpha Lock
If you prefer painting directly onto the letters, convert the text to pixels first.
- Tap the text layer and choose Rasterize. After this, you can't edit the font or wording, so duplicate the layer first as a backup.
- Swipe two fingers right across the layer to turn on Alpha Lock. Painting is now limited to the existing letter shapes.
- Paint or blur colors across the letters, using the soft brush from Method 1.
Alpha Lock is fast and familiar, but it's destructive. You can't regenerate a gradient on its own layer, and you can't revise the type later. A clipping mask is safer for client work with revisions. Use Alpha Lock when you're committed to the lettering and want to paint highlights or shadows directly onto it.
Method 4: Gradient Map for Multi-Stop Color
If your version of Procreate includes a Gradient Map adjustment, it recolors a layer based on its brightness. It doesn't create a gradient across your text, but it's useful for stylized, multi-stop color.
- On a clipped layer, paint a simple black-to-white transition across the text using the soft brush.
- Open Adjustments > Gradient Map and choose a preset or build your own color stops.
- Tweak the stops until the dark, mid, and light tones map to the colors you want.
This lets you design a gradient in grayscale and swap palettes later, which is handy when a client asks for "the same, but warmer." Feature availability depends on your Procreate version, so check your Adjustments menu.
Adding Depth After the Gradient
A flat gradient reads as generic. A few quick additions help:
- Highlight layer: Add another clipped layer, set it to Add or Overlay, and paint a soft light along the top edges.
- Shadow layer: Duplicate the text, fill it dark, and offset it below the original with a small Gaussian Blur.
- Grain: Add a noise or grain layer on top. Beyond looking good, it hides banding, which is a common problem with smooth gradients in 8-bit files.
Common Problems and Fixes
Banding. Smooth, low-contrast gradients can show visible steps. Add a thin layer of grain in Procreate, or add noise after import in After Effects, and work in 16 bits per channel there.
Soft or faded edges. This usually means the gradient layer was blurred with its colors stopping inside the text bounds. Redo the fill so the colors extend past the letters.
Gradient disappears. Make sure the gradient layer is actually clipped to the text layer, directly above it, and not hidden by a layer in between.
Blurry text on export. The canvas was too small. Rebuild it at final resolution; scaling up afterward won't restore sharp edges.
Exporting Gradient Text for After Effects
If the text is headed for a video project, how you export matters as much as how you paint.
- Transparent PNG: Hide the background color layer, then use Actions > Share > PNG. This is the easiest option for a single title card.
- PSD: Export as PSD to keep layers (text, gradient, highlights, shadow). In After Effects, import as Composition – Retain Layer Sizes to animate parts separately.
- Color check: Drop the file on a neutral gray in your comp and compare against your Procreate screen. Adjust gamut or profile if needed.
Remember that anything imported from Procreate is a flat raster. Scaling it up in a comp will soften it, so build at the largest size you'll need.
When to Build the Gradient in After Effects Instead
Procreate suits hand-painted, illustrative lettering. If the type needs to be live, resolution-independent, or animated by properties, After Effects is the better place to build it:
- Apply Gradient Ramp to a text layer and use Alpha or a track matte to limit it to the letters.
- Add a Gradient Overlay layer style to a text or shape layer for quick, editable gradients.
- Animate the ramp's start and end points, or the gradient colors, for shifting color over time.
A practical split: paint textured, brushy gradients in Procreate for hero lettering, and build clean, parametric gradients in After Effects for titles and lower thirds that will go through revisions.
Where Styleframe Fits in a Gradient-Text Workflow
You don't need an AI tool to make gradient text, and Procreate or After Effects will handle that on their own. Styleframe is useful when you want to carry that lettering into moving, stylized footage without losing control of the look.
Styleframe is an AI video and motion tool designed for artistic control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes, and iteration is non-destructive, so earlier versions aren't overwritten. Some practical uses:
- Restyle and Ink-and-Paint: Use your gradient lettering or a painted frame as a style reference, then apply that look to video clips through reference-driven style transfer.
- Frames-to-Video: Set keyframes, for example a plain title frame and a gradient-lit version of it, and generate the motion between them.
- Remove Background: Isolate a lettering element or subject from a generated frame for compositing.
That means you keep grading, tracking, and final comp where they are, and treat Styleframe as one stage for generating or restyling motion from the references you provide.
Quick Recap
- Create the text at final resolution.
- Add a clipped layer above it, and paint or blur a gradient there.
- Use Alpha Lock only when you're sure the type is final.
- Add highlights, shadows, and grain for depth and to prevent banding.
- Export as a transparent PNG or layered PSD, then check color in your comp.
- Move to After Effects for live, animatable gradients, or to Styleframe if you need to extend the look into stylized motion.