How to Make Good Procreate Brushes
StyleFrame Team8 min read
A good Procreate brush starts with a clean, high-contrast square source image, and it gets its character from a handful of settings: shape, grain, spacing, and pressure response. Build it at a large size in pure black and white, import it as a Shape or Grain source, and duplicate an existing brush before you change anything. Then test it in Brush Studio's drawing pad until it behaves the same way at small, medium, and large sizes.
What Makes a Brush "Good"
A good brush is predictable and distinctive. It reacts to pressure and speed in a way you can anticipate. It keeps its texture when you scale it. It also looks like your work rather than a default preset.
For motion and VFX artists, those qualities matter more than they do for a casual sketcher. Hand-drawn frames, texture plates, and style references often get stretched, graded, or fed into other tools. A brush that falls apart at 4K, tiles visibly, or turns muddy when you adjust levels will cost you time downstream.
Judge a brush by four things:
- Silhouette: does the edge of each mark read the way you intended?
- Texture: does the grain feel like part of the stroke, or like a filter sitting on top?
- Response: does pressure, tilt, and speed change the mark in a useful way?
- Consistency: does it hold up when you resize it or paint across a large canvas?
Start From a Safe Foundation
You can build a brush from scratch or modify an existing one. Both are valid, but a few habits save headaches.
Make your own brush set first. Tap the plus at the top of the brush library to create a new set, and name it something you will recognize. Keeping custom brushes out of the built-in packs makes them easier to back up, export, and share.
Duplicate before you edit. Swipe left on any brush and choose Duplicate. Editing the copy means you can always return to the original. Rename the copy in the About This Brush tab so you do not end up with five brushes all called "Copy."
Decide what the brush is for. A texture brush, a stamp, a scatter brush, and an ink liner each have different needs. A stamp lives or dies on its shape. A texture brush lives or dies on its grain. A liner depends on stroke stabilization and taper. Naming the purpose first keeps you from tweaking every setting at once.
Build a Strong Shape Source
The Shape is the stamp that Procreate drags along your stroke path. It defines the silhouette: edge quality, weight, and how the mark starts and ends.
Use the built-in library to learn. Import from the Source library, pick a rough shape such as a blotch, and see how it changes your stroke. This is the quickest way to learn what the Shape slot actually does.
Draw or scan your own for a distinctive result. Irregular ink blobs, sponge stamps, and scanned splatters all make excellent shapes. The less uniform the source, the more organic the stroke.
Follow these rules when you prepare the source:
- Work square. A non-square canvas distorts the brush.
- Work large. A 10 x 10 inch canvas at 300 dpi is a sensible starting point. Small sources turn soft and blurry when the brush is scaled up.
- Use pure black and white if you want a fully opaque mark. Grays and colors produce semi-transparent results, which is useful when you want it and frustrating when you don't.
- Remember how Procreate reads values. White is opaque and black is transparent. If your brush looks inverted, tap the source with two fingers to invert it.
Build a Strong Grain Source
The Grain is the texture that appears inside the shape. As you paint, you are effectively dragging a combination of the two along the path.
Your own scans make the best grain. Paint ink or watercolor washes on cold-press paper, photograph tree bark, sand, plaster, or concrete, and crop everything to a 1:1 ratio. Real surfaces carry irregularities that procedural textures struggle to imitate, and nobody else will have the same ones.
Two practical tips:
- Enable auto-repeat on the grain if you do not want to see tile edges when you paint broad strokes. For a truly seamless texture, prepare the image so its edges blend, and use the clone tool to hide any seams.
- Check grain behavior at scale. A texture that looks right at one size can behave very differently when enlarged. If you need the brush to work across a wide size range, test it at both extremes.
Choose your file format carefully. A PNG with a transparent background and black artwork imports as an empty square, because the engine reads black as transparent. Either draw the design in white, put black artwork on a solid white background, or save the source as a JPG. This is a common reason a new brush appears blank.
Tune the Stroke Behavior
With shape and grain in place, the stroke settings turn a stamp into a brush.
Spacing
Spacing controls the gap between stamps. Raise it and you see distinct, repeated marks, which is the basis of a stamp or chain brush. Lower it and the stamps merge into a continuous line. Most liners and paint brushes sit at low spacing, while decorative brushes sit higher.
Jitter and scatter
Jitter randomizes the placement of each stamp. A little adds organic irregularity to a texture brush. A lot creates scattered elements, which is how foliage, confetti, and debris brushes work. If you draw the same small shape over and over, a scatter brush replaces that work.
Falloff and taper
Falloff makes a stroke fade as though it is running out of paint. Taper shapes the start and end of a line. Both add the sense that a human hand made the mark, which is what separates a convincing ink brush from a mechanical one.
Stabilization
StreamLine smooths wobble in your line and is especially helpful for precise linework. Many brushes ship with some built in. Raise it for clean outlines, and lower it for loose, expressive sketching where you want the hand to show.
Size limits
If the slider does not reach the size you need, open the brush's Properties and widen the minimum and maximum. This is useful when you want a texture to read at poster scale or need a hairline liner.
Medium-specific settings
For watercolor-style brushes, tune dilution, flow, opacity, and bleed. For ink brushes, focus on taper, pressure curves, and stabilization. Match the settings to the physical medium you are imitating, and keep a real sample next to your screen when you can.
Test Like You Will Actually Use It
Brush Studio includes a drawing pad so you can test without leaving the editor. Use it deliberately:
- Paint short and long strokes, fast and slow.
- Vary pressure from feather-light to heavy.
- Try the extremes of the size slider.
- Paint in a dark color and a light color, since some textures only work in one.
- Check the brush on a real canvas, not just the pad, with overlapping strokes and layering.
Change one setting at a time. If you adjust five things at once, you won't know which one caused the improvement or the problem. Once the brush behaves, save it and keep a note of what worked. Brush-making gets faster when you reuse a known-good template rather than starting from nothing.
Fix the Usual Problems
- Brush paints nothing or a blank square: check the source format and value. A black design on a transparent PNG will read as empty.
- Brush looks blurry: the source was too small. Rebuild it larger.
- Edges look distorted: the source was not square.
- Strokes look like a chain of dots: spacing is too high.
- Texture shows visible tiles: turn on auto-repeat or make the grain seamless.
- Brush is semi-transparent when it should be solid: the source contains grays, so push it to pure black and white.
- Stamp rotates unexpectedly: in the brush's General settings, switch on Orient to iPad Screen.
Taking Custom Brushes Into a Motion Pipeline
For motion designers, animators, and VFX artists, a Procreate brush is often one step in a longer chain. You might paint a style frame, a texture plate, or a character pose, then need it to move or to feed a composite.
It pays to build your brushes with that handoff in mind. Make textures at high resolution, keep edges clean, and use consistent grain across a set. A style reference only transfers well if the look it shows is coherent.
Quick Checklist
Before you call a brush finished, confirm that it:
- Lives in its own named brush set.
- Was built from a square, large, high-contrast source.
- Uses the right format, with white as opaque and black as transparent.
- Has spacing, jitter, and taper tuned to its purpose.
- Holds up across its full size range.
- Has been tested on a real canvas with layered strokes.
- Is saved with a clear name and, ideally, backed up.
Good brushes come from repeated small experiments. Start with one shape, one grain, and a clear purpose, and build a set that reflects how you actually work.