How to Make Glossy Jelly Brush in Procreate
StyleFrame Team7 min read
To make a glossy jelly brush in Procreate, duplicate a soft round brush, then tune it in Brush Studio for smooth pressure taper, high opacity, and soft edges. Pair it with a small set of companions: a lineart brush, an opaque fill brush, a soft airbrush, and a hard highlight brush. Most of the "jelly" look comes from layered technique: saturated color, a lighter inner glow, and crisp specular highlights. The brush supplies the clean, controllable strokes.
What Makes Art Look Like Jelly
Commercial packs like the Viyaura Glossy Jelly set (six brushes plus a sparkle brush) and the 30-brush Jelly set on Procreate Folio are really toolkits, not one magic brush. Their parts break down like this:
- Lineart: smooth, tapered, slightly soft strokes
- Opaque fill: flat color with no visible texture
- Soft coloring and airbrush: dewy gradients
- Fine detail: small, precise marks
- Blender: smooth transitions
- Sparkle: a stamp-style finishing touch
Building your own gives you a set you can tweak, and you avoid the personal-use-only terms attached to some purchased packs, such as the Viyaura set.
Visually, jelly reads as glossy because of four cues:
- Saturated, slightly translucent-looking color
- Soft gradients that get lighter toward a rim or core
- Hard, small specular highlights, usually a dot plus a curved streak
- Colored lineart, a darker version of the fill rather than pure black
Set Up the Canvas
Create a canvas large enough to scale later. For anything headed to video, 4000 × 2250 px is a sensible start. Choose a color profile deliberately: Display P3 is fine for tablet viewing, but if your After Effects project is Rec. 709 or sRGB, convert to sRGB to avoid saturation surprises. Work on separate layers from the start, since you'll want them intact for animation.
Build the Brushes in Brush Studio
Open the Brushes panel, create a new brush set, and duplicate a stock brush for each tool below. Duplicating keeps the original untouched. The values here are starting points, so adjust them to your stylus and canvas size.
1. The Lineart Brush
Duplicate a monoline-style or technical pen brush.
- Stroke Path: Lower spacing, add a little StreamLine for smoother curves.
- Taper: Add both pressure and touch taper so strokes end in a soft point.
- Apple Pencil: Make size respond to pressure, but keep opacity near constant so lines stay solid.
- Shape: Use a round source with no grain, so the line is clean.
A slightly soft edge gives the "squishy" outline instead of a sharp vector look.
2. The Flat Color Brush
This brush should lay down fully opaque, texture-free color.
- Grain: Remove it.
- Apple Pencil: Disable opacity response so pressure only affects size.
- Properties: Set maximum opacity to 100% and keep the minimum size fairly large for quick fills.
- Rendering: Use a glaze mode so overlapping strokes don't build up unevenly.
Plenty of artists skip this brush and use ColorDrop with Alpha Lock. Either approach is fine, but a dedicated brush is faster for tight spots.
3. The Soft Coloring Brush
This brush does the dewy rendering.
- Shape: Use a soft, round source.
- Stroke Path: Use tight spacing so strokes blend into each other instead of looking like beads.
- Apple Pencil: Make opacity and flow pressure-sensitive so you can build color gradually.
- Rendering and Wet Mix: Try a small amount of dilution or attack for creamy mixing, but test it, because heavy wet mix can muddy saturated colors.
Use it on a clipped layer over your base color to build soft shading and inner glow.
4. The Airbrush
Duplicate a stock airbrush and adjust its softness and flow. You want a broad, smooth falloff for blush tones, rim light, and ambient glow. Keep flow low so you can layer slowly instead of blasting color in one pass.
5. The Fine Highlight Brush
This is the most important brush for the glossy effect. It should be:
- A small, hard-edged round
- Fully opaque
- Pressure-sensitive in size, for tapered streaks
Use it for the white dot highlights and curved streaks that sell the "wet" surface.
6. The Blending Brush
Duplicate a Smudge-tool brush and use a soft round shape with moderate strength. Keep it low-texture so it softens transitions without leaving grain. If it drags too much color, reduce its pressure response.
7. The Sparkle Stamp
Draw a small four-point star in pure black on a white square canvas, copy it, then import it as the Shape source in a new brush, inverting if needed. Raise spacing, add some scatter and rotation jitter, and turn off opacity pressure for consistent stamps. Finish with a name and a preview image in "About this brush."
Save everything in one brush set so you can export it or move it between devices.
Paint a Jelly Object Step by Step
Test your brushes on something simple like a gummy bear, a blob character, or a droplet.
- Flat base. Fill the shape on its own layer with your main color. Pick a mid-value, saturated hue. Jelly can't look glossy if the color is dull.
- Lineart. On a layer below or above the base, draw outlines in a darker, more saturated version of the fill. Avoid pure black unless you want a harder, sticker-like look.
- Shadow layer. Clip a new layer to the base. Use the soft coloring brush to paint shadow toward the bottom edge, shifting the hue slightly instead of just darkening. A multiply layer can work, but test it, because it can look flat or dirty on saturated colors.
- Inner glow. On another clipped layer, use the airbrush to add a lighter, warmer tone near the edge opposite the shadow, plus a faint glow in the core. This mimics light passing through a translucent material.
- Specular highlights. On a top layer, use the fine highlight brush to add a bright dot and a curved streak following the form. Vary their size. A tiny secondary highlight on the shadow side suggests bounce light.
- Cleanup and sparkle. Blend rough transitions, then add a few sparkle stamps sparingly.
Keep every step on its own layer. That layered structure matters later if the art will be animated.
Common Problems and Fixes
- Strokes look wobbly: Increase StreamLine or lower brush size, and check that your canvas is high-res.
- Colors look muddy: Reduce wet mix, avoid blending across different hues, and paint with saturated colors instead of dragging darker ones over lighter ones.
- Highlights look pasted on: Make them follow the contour of the shape and vary their size and opacity.
- Brush feels laggy: Lower the maximum brush size, reduce the shape source resolution, or simplify the stroke path.
- Edges look jagged: Check your Shape source import. Low-resolution shapes produce rough dabs.
Taking Jelly Art Into Motion
If you work in motion, the useful part is what happens after Procreate. Export as a layered PSD, or as PNGs with transparency, and import into After Effects with layers preserved. A layered jelly illustration lets you:
- Animate the base shape with Puppet pins or shape deformations for squash and stretch
- Move specular highlights separately, so they slide across the surface as the object moves
- Add a slow wobble to the highlight layers with Turbulent Displace or Wiggle
- Keep sparkles on their own layer for twinkling and scale pulses
Procreate's Animation Assist is also an option for short frame-by-frame loops, but for production work, After Effects gives you more control over timing and compositing.
Where Styleframe Fits
Painting a jelly look by hand works for a single hero asset, but extending that look across a sequence is where it gets expensive. AI video tools such as Styleframe may help extend a hand-painted style across a sequence, but check the tool's own documentation for what it currently supports. Treat any such tool as a way to extend your hand-painted style, not a replacement for it, and review results frame by frame, because style transfer can drift on complex shapes.
Quick Checklist
- Duplicate stock brushes instead of editing originals
- Build at least lineart, flat fill, soft color, airbrush, highlight, and blender brushes
- Use colored lineart and saturated shadows
- Keep highlights crisp and contour-following
- Separate base, shadow, glow, highlight, and sparkle layers
- Export layered files for animation in After Effects
A well-made jelly brush set is a few tuned tools and a consistent layering habit. Once your brushes feel right, the glossy look comes quickly, and the layered files give you everything you need to bring it into motion.