How to Make Glitter Brush Procreate
StyleFrame Team7 min read
To make a glitter brush in Procreate, create a new brush in the Brush Library and pick a speckled Shape Source such as Splash or Short Hair. Pair it with a grain like Bonobo or Blank, then raise Scatter, Jitter, and Maximum Size so every dab lands at a different size and position. Set the Rendering mode to Intense Blending with the Add blend mode so the specks brighten against darker colors. The values below are starting points, and you will tune them to the look you need.
What You Need Before You Start
- An iPad with Procreate (the steps below follow the Brush Studio layout from Procreate 5.x)
- An Apple Pencil, if you want pressure-sensitive size variation (not required)
- A dark or mid-gray test canvas, since glitter reads differently on white than on a toned background
The canvas size doesn't matter for building the brush. It does matter when you paint final art, so see the export section below.
Step 1: Create a New Brush
- Open the Brush Library and, optionally, create a new brush set (scroll to the top of the library and tap +). Name it "Glitter" so your experiments stay together.
- Tap the + in the upper right of the library to create a new brush inside that set.
- Open the new brush to enter Brush Studio.
Working in a dedicated set matters because you'll likely build several variants, such as fine dust, chunky flakes, and bokeh. Duplicating a working brush is faster than rebuilding it.
Step 2: Choose the Shape Source
The shape defines each individual speck. Tap Shape, then the edit button next to Shape Source, and open the Source Library.
- Splash gives irregular, spattered flecks, a good fit for lettering and bold glitter fills.
- Short Hair produces small, thin slivers that read as fine metallic flakes.
Experiment here. Any speckled or grainy shape from the library can work, and a small star or diamond shape imported from your own artwork will give you a "sparkle" variant.
Set Scatter and Rotation
Still in the Shape menu, raise Scatter so dabs spread away from the stroke line. Published tutorials use very different values. One goes as high as 125% for a wide, sprayed look, while another stays near 15% for a tighter texture. Start around 40% and adjust by eye.
Add some Rotation as well. Real glitter flakes catch light at random angles, and rotation jitter is what sells that. A value near 20% is a reasonable starting point.
Step 3: Set the Grain Source
Grain adds the fine texture inside each dab.
- Open the Grain menu and tap the grain square to open the Grain Editor.
- Choose Bonobo from the Source Library for a gritty, sandy feel, or Blank if you want clean specks with no internal texture.
- If you use Bonobo, set the grain Blend Mode to Linear Burn, raise Scale to roughly 33%, and lower Zoom to about 87%.
A blank grain gives crisp, sharp specks, while a textured grain gives a softer, more granular look. Which one is better depends on whether your target is metallic foil or sugary craft glitter.
Step 4: Tune the Stroke Path
Open Stroke Path (called Stroke in some versions).
- Spacing: This controls how far apart dabs fall. Tight spacing around 10% makes dense, continuous glitter. Wider spacing around 30% leaves visible gaps and a sparser sparkle.
- Jitter: A small value near 4% keeps lettering readable. A larger value near 20% scatters flakes more aggressively and suits textures and fills.
- StreamLine: If you plan to letter with the brush, push StreamLine up to smooth your strokes.
Dense and sparse versions of the same brush are both useful, so save one of each.
Step 5: Set Size Limits and Pressure
Open Properties (or General in some versions).
- Raise Maximum Size to somewhere between 350% and 400%. This lets individual flakes vary widely in scale. Don't go so high that the largest flakes turn blurry.
- Raise Minimum Size slightly, around 10%, so the smallest specks don't vanish.
- In the Apple Pencil menu, decide how pressure behaves. Setting opacity response to none keeps glitter uniformly bright. Raising the size response (around 80%) lets pressure change flake size, which is nice for expressive strokes.
Step 6: Make It Sparkle With Rendering and Blend Modes
This step separates flat speckles from something that looks like light catching metal.
- Open Rendering and set the mode to Intense Blending.
- Set the Blend Mode to Add.
Add makes overlapping flakes brighten rather than just cover each other, so dense areas bloom with light. It works best over a darker base. On white, the effect nearly disappears, so test on a gray or colored canvas.
Optional: Add Color Variation
For multicolor glitter, open Color Dynamics and add small amounts of hue, saturation, and brightness jitter per stroke or per dab. A little goes a long way. Heavy hue jitter looks like confetti rather than glitter.
Tap Done and name the brush. You now have a working glitter brush.
Step 7: Test and Refine
Paint on a mid-gray layer, then on a dark one. Check these things:
- Does it hold at scale? Zoom in to 200% and see whether flakes look crisp.
- Does it work on text? Letter a word with it.
- Does it look different in a clipped fill? Paint on a layer clipped to a shape or letter. This is how most artists apply glitter to type or icons.
- Is the density right? Adjust Spacing first, then Scatter.
A reliable texture workflow is to fill a canvas with a medium gray, paint dark glitter first, add lighter glitter on a separate layer, and then set that layer to a blend mode like Add or Screen. Keeping each pass on its own layer means you can recolor or rebalance later.
Common Problems and Fixes
Flakes look blurry. Maximum Size is too high, or you're painting on a small canvas and scaling up. Lower the max or paint at the final resolution.
Glitter looks flat. Check that Rendering is set to Intense Blending with Add. Also confirm your canvas isn't white.
Strokes look like uniform noise. Increase Rotation and Scatter, and add a wider gap between minimum and maximum size.
Lettering gets messy. Lower Jitter and Scatter, and raise StreamLine.
Color looks muddy. Paint the glitter in a light, saturated color on its own layer, and use alpha lock or a clipping mask for recoloring rather than repainting.
Taking Procreate Glitter Into a Motion Pipeline
Most glitter brush tutorials end at a static piece of lettering. If you work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, the useful question is what happens next.
Export for compositing
- Paint at the final delivery resolution, or larger, so you aren't scaling flakes up later.
- Hide the background and export a transparent PNG, or export a layered PSD so glitter, base color, and highlights stay on separate layers.
- Keep the bright "Add" glitter pass on its own layer. In After Effects, set that layer's blend mode to Add or Screen and it will behave much like it did in Procreate.
Animate the sparkle in After Effects
Static glitter art becomes more convincing with a little movement:
- Apply a
wiggle(8, 60)expression to the opacity of the glitter layer so flakes appear to twinkle. - Duplicate the glitter layer, offset it a few pixels, and animate the two out of phase so highlights shift as if the light were moving.
- Add Glow on the bright layer, then a subtle Turbulent Displace or Fractal Noise-driven matte to make sparkles wink on and off across the surface.
For a more physically believable result, such as glitter on a 3D object, you will usually move to Cinema 4D or Blender with a proper material. Procreate-painted glitter is better suited to 2D titles, stylized graphics, and texture maps.
Quick Reference: Starting Values
Treat these as starting points rather than fixed recipes. Different iPads, canvas sizes, and brush set defaults will shift how the same numbers look, so adjust Spacing and Scatter first and keep notes on the variants you like.