How to Make Fur Brush in Procreate
StyleFrame Team8 min read
To make a fur brush in Procreate, draw a short fur texture in white on a transparent canvas, copy it, and paste it into a new brush as the Shape Source. Then tune Stroke Path spacing, jitter, and pressure dynamics so the brush behaves like a clump of hair instead of a repeating stamp. Build a dark base first, paint in the direction the fur grows, and layer lighter clumps with gaps between them.
What you need before you start
You need an iPad with Procreate, and an Apple Pencil is recommended. Pressure and tilt matter a lot for fur, because tapered strokes are what make it read as hair. Decide what kind of fur you want before you draw anything: short and sleek, long and wavy, fluffy, or coarse. The texture you draw becomes the brush's shape, so this choice shapes everything downstream.
If you're making fur for a motion project, such as a character plate, a texture for a 3D model, or a frame-by-frame animation, work at your final pixel dimensions. Create the canvas at the resolution your comp will use, not at a screen-sized default.
Step-by-step: build a custom fur brush
1. Set up a clean canvas
Open a new canvas and open the Layers panel. Turn off the Background color so you can see what you're drawing in white. Select a bright white in the Colors panel.
2. Draw the fur texture
Pick any textured brush, such as chalk, dry media, or a fine ink brush, and draw a small cluster of hair strokes in the center of the canvas. This drawing is the raw material for the brush, so draw the character you want:
- Straight vs. curly: long, parallel flicks for sleek coats; curved overlapping marks for curly ones.
- Fine vs. thick: thin, tapered lines for realistic fur; chunkier marks for stylized or cartoon work.
- Dense vs. sparse: tight clusters give volume; loose strokes give a wispy edge.
Size doesn't matter much here, since you can resize the finished brush freely. Keep the drawing inside the canvas with some margin so nothing gets clipped. Then use Actions > Copy Canvas.
3. Create a new brush
Open the Brush Library and tap the + in the top-right corner. In the Shape section, tap Edit under Shape Source. In the Shape Editor, choose Import > Paste, then tap Done. Your drawing replaces the default circle.
4. Choose stamp or stroke behavior
This is the most important decision in the whole process. Under Stroke Path, the Spacing slider controls how the shape repeats along a line:
- Maximum spacing turns the brush into a stamp. Each tap places one copy of your fur cluster, which suits edges, tufts, and ruffs.
- Low spacing makes the cluster repeat densely along a stroke, which gives continuous flowing hair, but it can look mechanical if you don't add variation.
Start with a fairly wide spacing and tighten it until strokes feel continuous without turning into a solid band.
5. Add variation so it doesn't look stamped
Repeating shapes are the giveaway of a bad fur brush. Use these controls to break up the pattern:
- Jitter in Stroke Path scatters stamps slightly off the line.
- Scatter and Rotation in the Shape section vary angle and position. Use Rotation sparingly, because fur has a direction, and fully random rotation will fight your flow lines.
- Apple Pencil settings let you tie size and opacity to pressure, so light touches produce thin, faint wisps and firm ones produce thick clumps.
- Taper helps strokes thin out at the ends, like individual hairs.
6. Test, name, and iterate
Open the Drawing Pad in the brush editor and scribble. Check how the brush looks at small and large sizes, and at a few angles. Rename it and keep it in its own set. Duplicate the brush before big changes so you can compare versions.
Paint fur that looks like fur
A good brush won't rescue a flat painting. The technique matters as much as the tool.
Block in a dark base. Fill the shape with the darkest color of the coat, then layer slightly lighter tones where highlights will fall. Use a soft brush for this stage, since it only establishes form.
Smudge along the growth direction. Pull a smudge tool in the same direction the fur grows. Don't worry about the mess; this stage builds a believable underlying form that the hair detail sits on.
Work in clumps, not single hairs. Painting every strand is slow and tends to look wiry. Think in locks of fur, then add a few individual flyaways at the end.
Leave gaps. Space between strokes lets the darker layers underneath show through, which creates depth. A solid, fully covered surface looks like felt.
Vary length and curvature. Uniform strokes look combed. Change stroke length and bend slightly from clump to clump.
Build from dark to light. Add mid-tones, then highlights, using lower pressure and smaller sizes as you go. Overdoing the fur pass can make the result look unrealistic.
Soften the edges. Use the brush itself as an eraser, or a soft airbrush eraser, to taper the start of strokes and let them melt into the layers below. Keep some rough edges, because fur is not uniformly smooth.
Try the built-in brushes first
Before building anything custom, test what's already installed. Procreate's hair-style brushes, such as Short Hair, work well when blended with the smudge tool, and a technical pen at low opacity handles fine detail on a separate layer. The Short Hair brush looks fake if you lean on it too heavily, so use light pressure and build up gradually.
A custom brush earns its place when you need a specific fur type repeatedly, such as the same character's coat across dozens of frames, or a consistent look for a whole project.
Free brush sets worth studying
If you want to see how others structure fur brushes, download a free set and inspect it. Procreate's community library has a free fur set that can be used for animals and clothing. Another free pack from Bardot Brush includes 17 brushes covering five fur textures, with separate shaper, combed, feathered, short hair, fluff, and shadow brushes, and requires Procreate 5.2 or later. Open their settings and look at Spacing, Jitter, and Dynamics. Reverse-engineering a good set teaches you more than another tutorial will.
Check the license terms before using any downloaded brush in client work.
Getting Procreate fur into a motion pipeline
Fur painted in Procreate is raster artwork, so the handoff matters:
- Keep fur on its own layers with transparent backgrounds. Separate base, mid-tone, highlight, and flyaway layers give you more control in compositing.
- Export PNG or layered PSD. PNG preserves alpha. PSD keeps layers intact for After Effects, where you can animate or adjust each one independently.
- Work at the target resolution. Upscaling painted hair later softens fine strands.
- Plan for animation. For frame-by-frame work, duplicate your canvas for each frame and keep brush settings fixed so the texture stays consistent. For puppet-style animation in After Effects, paint fur in separate pieces such as tail, ear, and mane so you can rig and animate them.
- Use it as a texture. Fur painted in Procreate can serve as a color or alpha map in Cinema 4D or Blender, or as a hand-painted element in a Nuke comp.
Where Styleframe fits
Procreate gets you a hand-painted fur look, but animating it frame by frame is slow. Styleframe is an AI video and motion tool built for artist-directed control, and it can extend a painted fur asset instead of replacing your hand-drawn work. You drive generations with reference images, video clips, and keyframes, rather than a one-click prompt.
A few practical uses:
- Frames-to-Video: set your painted fur frames as keyframes and let Styleframe generate the motion between them, so the character's coat follows your design.
- Restyle and Ink-and-Paint: use your Procreate painting as a style reference and apply that look to footage or renders, so the fur texture carries across a shot.
- Remove Background: isolate painted or generated elements for compositing.
- 2D-to-3D and Turntable: turn a painted character into a 3D-style view or rotation for reference or look development.
- 4K Upscale: bring output to production-ready 4K.
Iteration is non-destructive, so you can try variations without losing earlier results. Output exports as image sequences, which drop straight into After Effects or Nuke, and an After Effects plugin is on the way. Your compositing workflow stays the same; Styleframe just adds another source of footage and textures to it.
Common problems and fixes
- Brush looks like a repeating stamp: raise Jitter, add slight Scatter, and reduce uniformity in the source drawing.
- Strokes look too thick or blobby: shrink the source drawing's marks, or lower the brush's maximum size.
- Fur has no direction: limit Rotation randomness and follow the growth direction with your strokes.
- Looks flat: add a darker base, leave gaps between clumps, and paint shadow layers underneath.
- Edges look cut out: erase the starts of strokes with a soft eraser and add a few stray hairs.
Final thoughts
A custom fur brush is quick to build, but the quality comes from the source drawing, the spacing and jitter settings, and how you layer the paint. Start with a dark base, work in clumps, and keep your layers separate when you export. That gives you the flexibility to animate, composite, or extend the artwork in whichever tools your pipeline already uses.