How to Make Fire in Procreate
StyleFrame Team8 min read
To make fire in Procreate, paint flame colors from light yellow to deep orange and red on one layer over a dark background, then smooth them with Gaussian Blur and push the shapes upward with Liquify. Duplicate the layer, set it to Add or Screen, and blur it to create a glow. For a quicker start, use the built-in Flames brush from the Elements set and refine it with the same blur and glow steps.
This guide covers both methods, then shows how to turn a painted flame into a short loop and bring it into After Effects.
What You Need Before You Start
Fire is a light source, so it reads best on a dark background. Set up the file with that in mind:
- Canvas: Work larger than you think you need. A big canvas (the Bardot Brush tutorial uses 3800×2800 px) gives you room to crop, scale, and composite later without softness.
- Palette: Pick five or six colors that move from pale yellow through orange and red to a near-black. A warm, slightly desaturated palette looks more natural than pure saturated orange.
- Brushes: A soft round brush, a textured painterly brush, and Procreate's built-in Flames brush from the Elements set cover everything below.
- Layers: Keep the background, flame core, flame body, and glow on separate layers. You'll want to adjust them independently.
Method 1: Use the Built-In Flames Brush
This is the fastest route and works well for stylized or illustrative fire.
- Fill the background layer with a dark color. Near-black with a hint of blue or brown looks better than pure black.
- Create a new layer and select the Flames brush from the Elements set.
- Choose a mid-orange and drag short, upward strokes from the base of the fire. Vary pressure and length so the tongues aren't uniform.
- Switch to a lighter yellow and add a smaller second pass toward the center of the base. Fire is hottest and brightest near its core, so the lightest color belongs in the middle and low.
- Add a few red-orange strokes at the outer edges and tips.
The brush gives you convincing texture, but it can look pasted-on. Lean on shape variation, overlapping strokes, and the glow step below to integrate it.
Method 2: Paint a Flame With Color, Blur, and Liquify
This approach gives you a softer, more painterly flame and more control over shape. It's the better choice if you plan to animate or composite the result.
Build the color ramp
Put every flame color on a single layer so they can blend into each other. Start by laying down your lightest yellow, then add progressively darker yellows, oranges, and reds around it, moving outward and upward. Finish with your dark background color at the edges so the fire fades into the surrounding space. Keep the shapes rough. Blending will do most of the work.
Blend with Gaussian Blur
Open Adjustments, choose Gaussian Blur, and slide your Apple Pencil or finger across the canvas to set the amount. Blur until the color bands dissolve into a smooth gradient, but stop before the shape loses all structure. Roughly the middle of the slider range is a reasonable starting point (one tutorial blurs to around 44%), but the right value depends on your canvas size.
Pull the flame shape with Liquify
Go back to Adjustments and choose Liquify. Use a push-style mode at a moderate size, press down, and drag upward from the base of the flame. Let your hand drift slightly left and right as you pull so the tongues curve instead of rising in straight lines. Work in short passes, undoing anything that looks like smeared paint rather than rising flame. Smaller Liquify brush sizes give you thinner, sharper flame tips.
Sharpen the edges
Blurred fire can look like a smoky gradient. On a new layer, paint a few crisp, thin flame tongues with a hard-edged brush in your brightest orange and yellow. Overlay them on the blurred base so the fire has both soft heat and defined shapes.
Add Glow With Blend Modes
Glow is what makes a flame feel like it emits light.
- Duplicate your flame layer.
- Apply a strong Gaussian Blur to the duplicate.
- Set its blend mode to Add (or Screen for a gentler effect).
- Lower opacity until the glow lifts the surrounding area without washing out the flame.
For environment light, create a new layer under the flame, paint a large soft orange circle around the base, and set it to Add or Overlay at low opacity. This bounces warm light onto logs, rocks, or a character's face. Matching that light on nearby objects does more for realism than any extra detail in the flame itself.
Finish With Embers, Smoke, and Context
A flame by itself looks like an effect. A flame in context looks like a scene.
- Embers: Paint small orange and yellow dots drifting upward, varying size and spacing. Make the ones near the flame brighter and the farther ones smaller and dimmer.
- Smoke: Use a soft textured brush in a dark gray-brown at low opacity above the flame, then smudge it upward.
- Fuel and surroundings: Add logs, coals, or a candle wick so the fire has a source. Use a darker shade on the sides facing away from the flame, and warm rim highlights on the sides facing it.
Animate Fire in Procreate
Fire is a good candidate for frame-by-frame animation because it never repeats exactly. Procreate's animation tools let you build a short loop from layers:
- Turn on Procreate's animation tools.
- Paint or duplicate your flame onto separate frames, redrawing or nudging the tongues slightly each time. A small number of frames is enough for a stylized loop.
- Keep the base of the flame anchored and vary the tips the most, as in real flames.
- Set a frame rate that suits the style. Lower rates feel hand-drawn, while higher rates feel smoother.
- Preview the loop to check that the motion flows from frame to frame.
When you're happy with it, export in a format that suits your goal: a video or animation file for quick previews, or an image sequence if you plan to composite. A transparent background is only useful if your flame was painted on a transparent layer. If you painted fire on black, you can bring it into After Effects and use Screen or Add to drop the black out.
Bring Procreate Fire Into After Effects
Painted fire becomes much more useful once it's in a comp.
- Blend it in: Place the footage or still above your scene and set the layer's blend mode to Screen or Add. Black falls away and the flame stays.
- Loop it: For short sequences, loop the footage with time remapping or a looping expression.
- Add motion: Apply a displacement or warp effect at low values to add organic wobble to a still flame, and animate it over time.
- Add glow: Use a glow effect or a stack of blurs set to Add for a more controllable bloom than a baked-in one.
- Add light interaction: Animate a Solid or Light layer with flicker, so the environment pulses in sync with the fire.
- Match grain and color: Add subtle grain and a color correction pass so the painted flame sits with the rest of the shot.
The same workflow applies in other compositing tools. Any tool with Add or Screen blending will handle black-background fire.
Where Styleframe Fits in a Fire Workflow
Procreate is excellent for designing the look of a flame, but extending a hand-painted frame into longer, richer motion is slow. is an AI video and motion tool that you can use to extend painted frames into motion, using your Procreate paintings as a starting reference. Your compositing pipeline stays the same, and the tool covers the generation step in the middle.
Common Mistakes to Avoid
- Fire on a light background: Add and Screen modes only work against darkness. Design for a dark scene.
- Uniform flame shapes: Repeating the same tongue shape looks like a pattern. Vary height, width, and curve.
- Too much blur: Over-blurred fire looks like colored smoke. Keep crisp tips on top.
- Flat, single-hue color: Use at least three or four tones from yellow to deep red.
- No light interaction: If the surroundings aren't lit by the fire, it won't feel hot.
- Static loops: For animation, vary the tips on every frame and avoid obvious repetition.
FAQ
What is the best brush for fire in Procreate? The built-in Flames brush in the Elements set is the fastest starting point. For a painterly look, a textured round brush with Gaussian Blur and Liquify gives more control.
Can I make fire look glowing in Procreate? Yes. Duplicate the flame layer, blur it heavily, and set it to Add or Screen. Add a soft orange layer behind the fire to cast ambient light.
Can I animate fire in Procreate? Yes. Paint a short set of frames with varying flame tips and export the result as a video, animation file, or image sequence.
How do I use Procreate fire in After Effects? Export an image sequence or video, drop it into a comp, and set the layer's blend mode to Screen or Add so the dark background disappears. Then add glow, displacement, and color matching.