How to Make Discord Emotes on Procreate
StyleFrame Team9 min read
To make a Discord emote in Procreate, draw on a square transparent canvas (512 × 512 px or larger), keep the design bold enough to read at chat size, and export it as a PNG. Discord scales uploads down and limits emoji file size, so check its current limits before you finalize anything. For an animated emote, build the loop in Animation Assist, export it as a GIF, then shrink the frame size and color count until it fits under that limit.
Discord Emote Specs to Design Around
Check Discord's current limits before you commit to a canvas size, since platforms change them. Look up the current recommended emoji dimensions, maximum file size, accepted static and animated formats, and naming rules in Discord's official documentation, and design around those numbers.
Two practical consequences follow. First, transparency matters, so PNG is the right static format. Second, the file-size limit is a tight budget for animation, so plan it from the first frame rather than fixing it at export.
Step 1: Set Up the Canvas in Procreate
Create a custom canvas that is square. Work at 512 × 512 px or 1024 × 1024 px, because drawing larger than the final size lets you keep clean lines and then scale down with crisp results. Scaling down from a clean, larger source is more forgiving than drawing at the final size and hoping for the best.
Before you draw:
- Turn off the background color layer in the Layers panel so the exported file is transparent.
- Create separate layers for line art, flat color, shading, and any effects. You'll want them separated later for animation or recoloring.
- Turn on the Drawing Guide (Canvas > Drawing Guide > Edit Drawing Guide) with a grid or symmetry if your emote is a face or mascot. Centering helps the emote read as a single shape.
Step 2: Design for Tiny Sizes
Emotes live inline with text, so most of your design decisions are really legibility decisions. Procreate's zoom makes it easy to fall into detail work that disappears once the image is a few dozen pixels wide.
- Fill the frame. Crop tight on the face or key shape. Empty padding wastes pixels.
- Use thick, consistent outlines. Thin sketch lines break up at small sizes. A heavier outline also keeps the shape readable on both dark and light Discord themes.
- Limit your palette. Three to five main colors, with strong value contrast between them, read better than subtle gradients. Fewer colors also compress better in GIFs.
- Exaggerate the expression. Big eyes, open mouths, and obvious props carry the emotion. Avoid anything that depends on fine facial detail.
- Add a thin outer stroke. A light or dark keyline around the silhouette keeps the emote legible on any background.
Test early. Use Procreate's Canvas > Reference or simply pinch-zoom out until the drawing is about the size of a postage stamp. Better still, export a draft, shrink it to 48 px and 32 px on your desktop, and view it next to real chat text.
Step 3: Finish the Line Art and Color
Use a hard-edged brush with pressure-based taper only at the ends. Textured brushes look great at 1024 px and become noise at small sizes. A solid inking brush such as a basic monoline or studio pen works best.
For color, use ColorDrop or Alpha Lock on a dedicated flat-color layer. Keep shading to one or two flat tones instead of soft airbrushing. Soft gradients can band when Discord rescales the image, and they inflate GIF file sizes.
Group the layers when you're done so you can duplicate the whole emote for variations such as a different expression or palette.
Step 4: Export a Static Emote
- Hide any layers you don't want in the final image.
- Confirm the background color layer is off.
- Tap Actions > Share > PNG.
- Save to Files or AirDrop to your computer.
If your canvas was larger than Discord's emoji size, you can upload it as is, and Discord will downscale it. Many artists prefer resizing themselves so they control the resampling. Export at the recommended size from an image editor, check the result, and keep the larger master for later. If the file is over Discord's file-size limit, run it through a PNG optimizer, or reduce colors in an editor.
Step 5: Build an Animated Emote with Animation Assist
Procreate's Animation Assist turns layers into frames. Turn it on under Canvas > Animation Assist.
- Treat each layer as a frame. Draw your first pose, then duplicate the layer and modify it.
- Set the frame rate in the Animation Assist settings. For emotes, 8 to 12 FPS is usually enough, and lower frame rates save file size.
- Turn on Onion Skin to see neighboring frames while you draw.
- Use Background layers for anything static, such as a base head, so you don't redraw it on every frame.
- Keep loops short. Four to eight frames is often plenty for a bounce, blink, wiggle, or sparkle.
Design the loop so the last frame leads smoothly into the first. A simple squash-and-stretch bounce or a rotating accent often works better than complex full-character motion, because small movement is what reads at emote size.
To export, go to Actions > Share and choose Animated GIF. Set the speed (FPS) to match your project, then save the file.
Step 6: Get an Animated GIF Under Discord's File-Size Limit
Procreate's GIF export is convenient but not optimized for strict size limits. If the GIF is too large, work through this order:
- Reduce canvas size. Resize to Discord's recommended emoji size or slightly smaller. This usually saves a lot.
- Cut frames. Fewer frames and a lower FPS shrink the file fast.
- Reduce colors. Drop to 32 or 64 colors in a GIF optimizer. Flat-color art handles this well.
- Remove dithering where it isn't needed, since dithering adds noise that compresses poorly.
- Use lossy GIF compression with a tool like Gifsicle or a web optimizer, and check the result for artifacts.
Always preview the final file at actual size on a dark and a light background. GIF transparency is one-bit, so edges can look jagged against backgrounds that differ from the one you tested on. A slightly thicker outline or a solid dark keyline hides this.
Taking Emotes Further in a Motion Pipeline
Procreate is a fine place to draw and a basic place to animate. If you're a motion designer, you may want more control over timing, easing, or effects than Animation Assist offers.
A common workflow:
- Export your layers from Procreate as a PSD or as individual PNGs (Actions > Share > PSD or PNG).
- Import into After Effects. Keep the layers separate and animate with transforms, puppet pins, or shape-layer overlays for glints and impact frames.
- Render a PNG sequence with alpha at your working size.
- Convert the sequence to an optimized GIF with a tool such as ffmpeg with palette generation, gifski, or Photoshop's Save for Web.
This approach keeps the hand-drawn look from Procreate while giving you graph-editor timing and consistent frame output. It also lets you reuse the same assets for stream overlays, alerts, and stickers.
Where Styleframe Can Help
Styleframe isn't required for a Discord emote, and a simple 6-frame GIF doesn't need it. It becomes useful when an emote character grows into a larger asset: an animated stream alert, a channel trailer, a sticker animation, or a short promo where your Procreate character needs to move more than a few frames allow.
Styleframe is an AI video and motion tool built for artistic control, not a one-click generator. Every generation is driven by your own reference images, clips, and keyframes. A few features map directly to this workflow:
- Frames-to-Video: Use two or more of your Procreate poses as keyframes and generate the motion between them, so the character design stays yours.
- Restyle and Ink-and-Paint: Apply a reference-driven style transfer so footage or 3D renders match your hand-drawn look.
- Remove Background: Cut your character cleanly from a clip so you can place it over other footage.
- 2D-to-3D and Turntable: Turn a flat design into a rotating view for reference or promo material.
- 4K Upscale: Produce production-ready 4K output of larger assets before you downscale versions for platforms.
Iteration is non-destructive, so you can revisit a keyframe or reference and regenerate without losing earlier versions. Your compositing stays where it is. For the emote itself, you'd still downscale and optimize the final frames the same way as above.
Uploading and Naming Your Emotes
Once your files are ready:
- Open Server Settings > Emoji.
- Select Upload Emoji and choose your PNG or GIF.
- Give each emote a short, memorable name, and check Discord's current naming rules for allowed characters and minimum length.
- Check how it looks in chat on both themes and on mobile.
Server emote slot counts and access to animated emotes can vary, so check Discord's current rules. Because animated emotes may not be usable everywhere, consider providing a static fallback for key reactions.
Common Mistakes to Avoid
- Drawing at final size. You lose cleanup room. Draw large, then scale.
- Leaving the background layer on. The export won't be transparent.
- Over-detailing. Texture and thin lines vanish at chat size.
- Animating too many frames. The GIF will blow past Discord's file-size limit and the motion won't read anyway.
- Skipping the dark/light theme test. Edge quality changes with the background.
- Inconsistent sets. Use the same outline weight, palette, and crop across a pack so it feels like one family.
Quick FAQ
What canvas size should I use in Procreate? 512 × 512 px or 1024 × 1024 px. Both are larger than the final size, so they scale down cleanly.
Can I export a transparent PNG from Procreate? Yes. Turn off the Background Color layer, then export as PNG.
Can Procreate export animated emotes directly? It can export an animated GIF from Animation Assist, but you will probably need to shrink and optimize it to meet Discord's file-size limit.
Do I need After Effects? No. It's a useful option if you want finer control over timing and effects, and if you plan to reuse the character in larger motion projects.