How to Make Dashed Line in Procreate
StyleFrame Team9 min read
Procreate has no built-in dashed line option, so you make one by duplicating the Monoline brush and editing it in Brush Studio. Draw a short, thick line on a square canvas, copy it, and paste it into the duplicate brush as a new Shape Source. Then set Rotation to "Follow Stroke" and raise Spacing under Stroke Path until gaps appear between the dashes. For a dotted line, skip the custom shape: just raise the Monoline copy's spacing and remove its taper.
Why Procreate Has No Dashed Line Toggle
Procreate is a raster painting app, so its lines are built from stamps of a brush shape repeated along a path. A dashed line is a stamp that is elongated and spaced apart. Once you see it that way, the process is simple: you control the shape of the stamp and the distance between stamps.
The brush approach has real advantages. The dashes follow curves and look hand-made rather than mechanical. The tradeoff is that the result is pixels, not vector paths, so you can't change dash length afterward the way you can in Illustrator or After Effects. If you need an exact, editable, animatable dash, see the After Effects section below.
Method 1: Build a Custom Dashed Line Brush
Step 1: Draw the dash shape
- Create a square canvas. Any size works as long as it's square. 1080 × 1080 px is plenty for a shape source, though a larger canvas gives you a crisper stamp.
- Choose the Monoline brush from the Calligraphy set and push its size to the maximum (you may need to dial it back a bit so the line doesn't fill the canvas).
- Draw a single short, thick line. Hold your pencil at the end of the stroke to trigger QuickShape and snap it perfectly straight. Adjust its length and angle with the shape handles.
- Center the line. Open the Transform tool with Snapping on, then nudge the line until the yellow guides confirm it's centered both ways.
The proportions of this line become the proportions of your dash. A short, fat line gives you chunky dashes. A long, thin one gives you elegant ones.
Step 2: Copy the shape
Copy the layer using the layer menu (tap the layer, then Copy), or swipe down with three fingers and choose Copy All. Either puts the image on your clipboard.
Step 3: Duplicate a brush
Open the brush library, find Monoline, swipe left on it and tap Duplicate. Working on a duplicate keeps the original brush untouched. Many artists also make a new brush set (tap the plus sign at the top of the library) and name it something like "Dashes" so custom brushes stay organized.
Step 4: Replace the Shape Source
- Tap the duplicate to open Brush Studio.
- Choose Shape, then tap Edit above the shape preview.
- Tap Import, then Paste.
- Check the result. Procreate paints with the white parts of the shape and ignores the black. If your pasted shape is a black line on white, invert it with a two-finger tap in the shape editor.
- Tap Done.
Step 5: Set rotation and spacing
- Still in the Shape section, drag Rotation all the way to Follow Stroke. This makes each dash turn to follow the direction you're drawing, which is what lets the line work on curves and diagonals.
- Open Stroke Path and raise Spacing until there are clear gaps between stamps. A range of about 60–70% is a sensible starting point, but it depends on the dash length you chose.
- Check the taper settings. If your dashes shrink at the start and end of each stroke, set all taper values to none.
Step 6: Tidy up and save
Tap Stabilization to adjust Streamline, Stabilization, and Motion Filtering. Higher values give smoother lines but add lag, so find a balance for your drawing style. Then open About this brush, rename the brush, and tap Done.
Method 2: Make a Dotted Line Brush
Dotted lines are even simpler because the default round tip already does the work.
- Duplicate the Monoline brush.
- Open Brush Studio and go to Stroke Path.
- Raise Spacing until the round stamps separate into distinct dots.
- Under Taper, set all sizes to none. Otherwise the first and last dots in each stroke come out smaller.
- Tap Done and rename the brush.
Adjust the spacing later to bring the dots closer together or push them apart. Because the dots are stamps of the brush tip, a larger brush size gives you larger dots.
Fine-Tuning Your Dashes
Once the basic brush works, a few tweaks make it more usable:
- Dash length: Go back to the shape source and change the line's length. This is more reliable than trying to compensate with spacing alone.
- Squared ends: For squared-off dashes, draw a rectangle and fill it instead.
- Pressure response: Under Apple Pencil settings, you can adjust how the brush responds to the pencil for a more organic look, or keep it flat for consistent dashes.
- Preview size: Shrink the drawing pad preview in Brush Studio so you can see more of the stroke while adjusting spacing.
Troubleshooting Common Problems
Dashes look skewed or oriented the wrong way. Confirm that Rotation is set to Follow Stroke. If the problem persists, check the Properties section for "Orient to screen" and turn it off, which was the missing fix in one walkthrough.
The dashes are solid, with no gaps. Spacing is too low. Keep raising it until the preview shows clear breaks.
The shape comes out as a negative. Your pasted image was inverted. Invert it in the shape editor.
The line looks shaky. Raise Streamline and Stabilization, or draw straight segments with QuickShape.
The brush is too large or too small. Adjust the maximum size under Properties. Setting a higher maximum is useful while testing so you can see what the dashes look like.
A Quick Manual Alternative
If you only need a dashed line once, skip the brush. Draw a solid line with QuickShape, then erase gaps at regular intervals using a hard eraser with a snapped straight line, or use Selection with a rectangle and Snapping on to cut precise gaps. It works for a single border or divider, but it's slow and hard to repeat. For anything you'll use more than once, the brush wins.
Taking Dashed Lines Into Motion Work
If your dashes are headed to a video project, decide early whether you want a hand-drawn look or a precise, editable one.
Hand-drawn dashes from Procreate. Export the artwork as a PNG with a transparent background (hide the background layer first) or as a PSD to keep layers separate. Import it into After Effects or Premiere Pro and animate it as a layer with position, scale, or masks. A mask reveal that wipes along the dashed path gives you a draw-on effect. You can also export multiple versions of the drawing as a frame-by-frame sequence for a boiling-line look.
Precise, editable dashes in After Effects. If you need dashes that animate cleanly, rebuild them as a shape layer. Add a Stroke, then use its Dashes, Gap, and Offset options. Animating Offset creates the familiar marching-ants or flowing-path effect, and Trim Paths handles draw-on reveals. Because it's vector, you can change dash length, color, and spacing at any time and render at any resolution.
A practical workflow is to use Procreate for style exploration, such as how the dash feels, how wobbly it is, and how it sits against type or illustration. Then rebuild the final version in After Effects if it needs to be controlled or repeated across shots.
Where Styleframe Fits
If the dashed-line look you drew in Procreate is part of a larger visual style, such as an illustrated map route, a hand-inked diagram, or a stylized title sequence, can help carry that look into video. Styleframe is an AI video and motion tool built for artistic control rather than one-click black-box output. Every generation is driven by your own reference images, video clips, and keyframes.
In practice, you might use a Procreate frame as a style reference for Restyle or Ink-and-Paint, which are reference-driven style transfer tools, so footage picks up your drawn linework. Or you might build keyframes from your illustrations and use Frames-to-Video to generate motion between them. Iteration is non-destructive, so you can try alternatives without losing earlier versions, and outputs are production-ready 4K. Remove Background and 4K Upscale can help prepare or finish assets, and 2D-to-3D and Turntable are available if an illustrated object needs to rotate.
Styleframe fits into an existing pipeline rather than replacing it. It exports image sequences you can bring into After Effects or Nuke, and an After Effects plugin is on the way. Your compositing, timing, and finishing stay where they already live. For a precise dashed line that must hit exact values, After Effects shape layers remain the right tool. For a drawn, textured look that needs to extend across moving imagery, a reference-driven approach is worth testing.
Quick Reference
Final Thoughts
Making a dashed line in Procreate comes down to three settings: a custom shape source, Follow Stroke rotation, and increased spacing. Build the brush once, save it in its own set, and you can reuse it across every project. When the work moves into motion, decide whether the hand-drawn feel is the point. If it is, export from Procreate and animate it. If you need precision, rebuild the dashes in After Effects and let the drawn version serve as your style guide.