How to Make Custom Brushes Ipad Pro Procreate
StyleFrame Team8 min read
To make a custom brush in Procreate on an iPad Pro, tap the Brushes icon, create a new brush set, then tap the plus button to open Brush Studio. Choose a Shape (the stamp that defines the tip) and a Grain (the texture applied inside that shape), then tune Stroke Path, Apple Pencil pressure, and other dynamics until it behaves the way you want. Duplicating an existing brush and modifying the copy is the fastest route, and importing your own scanned or photographed textures is what makes a brush look original.
What you need before you start
You need an iPad Pro running Procreate and, for pressure-sensitive brushes, an Apple Pencil. Procreate's help article on customizing brushes states that it requires an Apple Pencil.
Beyond that, gather a few source materials:
- A square image for any custom shape or grain. Cropping to 1:1 works well.
- Textures from your camera: paper, bark, sand, plaster, or scanned ink washes all work.
- A test canvas you can scribble on without worrying about the result.
If you're coming from motion design, think of this as building a reusable asset: a stamp or texture you'll later use in frames, mattes, or style references.
Step 1: Create a brush set and a new brush
- Tap the Brush icon to open the library.
- Scroll to the top of the sets list and tap the plus to create a new brush set. Name it something you'll recognize, like "Texture Lab" or your studio name. This keeps custom brushes out of Procreate's default sets.
- With your new set selected, tap the plus at the top of the brush list. That opens Brush Studio with a blank brush at default settings.
The shortcut: duplicate instead of starting blank
Starting from scratch is rarely the best idea. Swipe left on any existing brush and tap Duplicate, then tap the copy to open Brush Studio. Because the copy already has sensible pressure, taper, and dynamics, you're adjusting a working brush rather than debugging an empty one.
Before you change much, open About this brush at the bottom of the left-hand tabs and tap Create new reset point. That gives you a baseline to return to when an experiment goes wrong.
Step 2: Understand Shape and Grain
Nearly every Procreate brush is a combination of two things:
- Shape: the stamp that's laid down along your stroke path. Think of a round crayon tip versus a square chisel versus a blotchy splatter.
- Grain: the texture that shows through that stamp, like paper tooth under charcoal.
Shape plus grain gives you most of the character of any brush. Everything else, such as spacing, pressure, and smoothing, determines how that character behaves as you draw.
Step 3: Set the Shape source
In Brush Studio, tap Shape, then tap Edit next to Shape Source. (On smaller screens the Edit button may be absent, so tap the shape preview directly.)
You have two main options:
- Source Library: tap Import, then Source Library. Procreate ships with 150+ shapes, so something like a rough blotch is a quick way to get irregular edges.
- Your own image: import from Photos, Files, or paste from the clipboard. Hand-drawn blobs, ink splatters, and sponge stamps tend to produce more interesting brushes than clean geometric shapes.
How Procreate reads your image
This is where most beginners get stuck. The brush engine treats white as opaque and black as transparent. If you import a black design on a transparent PNG, Procreate effectively reads a blank square, and your brush appears to do nothing.
Fixes, in order of simplicity:
- Save your artwork as a JPG with a solid white background (black design on white) and import that.
- Or make the design white if you're using a transparent PNG.
- Use the two-finger tap on the source preview to invert it if the result is backwards.
If you're building a stamp, a simple workflow is to draw your design in true black on a 2048 × 2048 square canvas, export it as JPG, then import it as the shape.
Step 4: Set the Grain source
Open Grain, then Edit next to Grain Source. You can again pick from the Source Library or import your own.
Good grain sources are easy to collect:
- Photograph paper, concrete, bark, or fabric with the iPad camera.
- Scan watercolor washes or ink textures, then crop to a square.
- Use flat, evenly lit photos. Strong shadows or vignetting will show up as visible patterns in your strokes.
Turn on Auto repeat so the grain tiles seamlessly instead of showing hard edges as you paint.
Step 5: Tune Stroke Path
Stroke Path controls how the stamp is repeated. These are the three controls you'll use most:
- Spacing: the gap between stamps. Low values blend into a smooth stroke; high values reveal individual stamps, which is what you want for a stamp brush.
- Jitter: scatters stamps off the path, useful for spray, debris, or grit.
- Falloff: makes the stroke fade out as if the brush is running out of paint.
For image-based stamp brushes, you'll usually raise Spacing so stamps don't overlap, and enable Orient to iPad Screen in the General settings so the stamp keeps a consistent orientation rather than rotating with your stroke.
Step 6: Shape the Apple Pencil response
Pressure is what makes a brush feel natural. Open the Apple Pencil tab in Brush Studio and you'll see a pressure graph.
- Tap the graph to add a node and drag it to bend the curve. You can use up to six nodes.
- Raise the curve for a brush that responds quickly to light pressure; lower it for one that needs a firmer press to build up.
- Check the Pressure values under the graph, such as Size and Flow. Those determine which properties the curve actually affects.
Procreate allows pressure curves per brush. If your brushes feel inconsistent, consider checking the global Pressure & Smoothing preferences. Resetting them restores a clean baseline, but it wipes any global tuning you've done, so only do it if you haven't customized those settings.
You can also try adding Color dynamics, for example increasing Hue under Color pressure so hue shifts as you press harder. It's a quick way to see how much of a brush's personality comes from dynamics rather than its shape.
Step 7: Test, refine, name, and share
Brush Studio includes a drawing pad on the right where you can test strokes as you adjust settings. Use it to check:
- Do strokes start and end the way you expect (taper)?
- Does the brush read correctly at small and large sizes?
- Does it look right in both light and dark colors?
Then tap Done and try the brush on a real canvas. Open About this brush to name it and add your signature. To share it, swipe left on the brush and tap Share. To reorganize, press and hold a brush and drag it between sets.
Brush ideas that suit motion-design workflows
Custom brushes are useful beyond illustration. A few that translate well into animation and VFX pipelines:
- Ink and edge-break brushes for hand-drawn mattes, rough-edged masks, or wipe shapes.
- Grain and dust stamps for texture overlays you can later place as layers in After Effects.
- Dry-media brushes (charcoal, graphite, chalk) for boiling-line style frames.
- Pattern stamps for repeated motifs used in backgrounds or title treatments.
When you're ready, export your artwork from Procreate and bring it into your compositing or editing tools like any other asset.
Using your brushwork as a style reference
Once you have a few brushes you trust, the next question is how to carry that hand-made look into moving image. One option is to use the frames you paint as references in , an AI video and motion tool.
In practice, that could look like this:
- Paint a handful of key frames in Procreate with your custom brushes, defining the line quality and texture.
- Use those frames as reference images in the tool, so the look comes from your artwork rather than from a text prompt alone.
Your compositing, color, and delivery pipeline stays the same, and the tool is not a replacement for Procreate or your compositor.
Common mistakes to avoid
- Importing a black design on a transparent PNG. It reads as empty. Use white-on-transparent, or black-on-white JPG.
- Skipping the duplicate step. Edit a copy of a brush you like so the original survives.
- Using non-square images for shape or grain, which leads to cropping or distortion.
- Over-tweaking. You only need a few settings (Shape, Grain, Spacing, pressure) to get a convincing brush. Start there before touching the rest.
- Unseamless grain. Visible tile edges mean Auto repeat is off or the photo has uneven lighting.
Quick workflow summary
- Create a brush set, then a new brush, or duplicate an existing one.
- Create a reset point.
- Set Shape (library or custom, white-on-black logic).
- Set Grain (square, seamless, evenly lit).
- Adjust Spacing, Jitter, and Falloff in Stroke Path.
- Tune the Apple Pencil pressure curve.
- Test in the drawing pad, name the brush, and share or export.
Make a few variations of the same brush, keep the good ones in a dedicated set, and your library becomes a personal toolkit that carries consistently from still frames into motion work.