How to Make Curly Hair Brush Procreate
StyleFrame Team9 min read
To make a curly hair brush in Procreate, open the Brush Library, tap the + icon to create a new brush, and draw a small spiral or loop in the Shape editor. Then set Shape behavior to scatter and rotate with the stroke, widen the Stroke Path spacing, and add Taper and pressure dynamics so each pass reads as a clump of ringlets instead of a repeating stamp. Test it on a blank canvas, tweak until the curls overlap naturally, and save it. The sections below cover the settings in the order that works best, plus how to carry hand-painted hair into an After Effects or Nuke pipeline.
What a curly hair brush actually has to do
Straight and wavy hair can be faked with a thin tapered line. Curls can't. The eye reads curly hair through three things: repeating loop shapes, irregular overlap between strands, and highlights that follow the curl's form rather than the stroke direction.
A good curly brush handles the first two automatically so you can spend your effort on the third. That means your brush needs:
- A shape that suggests a coil, ringlet, or S-curve, not a straight line.
- Scatter and rotation randomness so loops don't land in a visible pattern.
- Spacing wide enough that each loop stays distinct, but tight enough to feel like one continuous lock.
- Pressure and speed dynamics so a fast flick gives loose, thin curls and a slow press gives dense ones.
If you're coming from a motion background, think of it like building a particle emitter: the stamp is the particle, and the stroke settings are the emission rules.
Step 1: Set up a clean test canvas
Create a new canvas around 2000 × 2000 px. You'll use it only to test the brush, so keep a dark mid-tone or a plain light background with a hair color you actually plan to paint. Testing in black on white hides problems that show up with color and layer blending.
Then open the Brush Library, find or create a set for your custom brushes (swipe left on a set to duplicate it, or tap the set list to add a new one), and tap + to start a new brush. Keeping hair brushes in their own set saves a lot of time later.
Step 2: Build the shape
In Brush Studio, open Shape and tap Edit under the Shape Source. This opens the shape editor, where you draw the stamp that repeats along your stroke.
For curly hair, you have a few options:
- Single coil: a small spiral or open loop, roughly 1.5 turns. This is the most flexible starting point.
- S-curve: a single wave segment that stacks into ringlets when rotated and scattered.
- Clump stamp: three or four thin, slightly offset loops in one shape, which gives you a ready-made lock of hair.
Draw with a thin, slightly rough line rather than a perfect vector-clean curve. Real hair is never uniform, and the roughness helps the stamp blend when strokes overlap. The editor works in black-and-white tonal values, so if your first test paints the negative of what you drew, use the invert option in the editor.
Keep the shape centered in its frame. Off-center shapes make rotation behave strangely because the stamp pivots around the middle of the canvas, not around your drawing.
Step 3: Tune Shape behavior for natural variation
Back in the Shape tab, the behavior sliders do most of the work for curls. Exact labels vary slightly between Procreate versions, but the principles are the same:
- Scatter: a small amount pushes loops off the stroke line so they form a band rather than a thin chain. Too much and the hair looks like confetti.
- Rotation: set the shape to follow the stroke direction, then add a modest amount of jitter. This keeps coils aligned with the flow of the hair while avoiding perfect repetition.
- Count and count jitter: raising count stacks several stamps at each point, which fakes a thick lock. Jitter varies how many appear, which breaks up uniformity.
- Randomized: adds per-stamp variation. Use it sparingly for tight coils and more generously for loose, frizzy curls.
Change one slider at a time and scribble after each change. When you adjust five at once, you can't tell which one fixed or broke the look.
Step 4: Set the stroke path and taper
Open Stroke Path. Spacing is the setting that matters most here. Low spacing makes the stamps merge into a solid, ropey line, which looks like a pipe cleaner. Higher spacing separates the loops into visible individual curls. Start around the middle and nudge upward until you can see each coil but they still read as connected.
Add a little Jitter to shift stamps off the exact path, and use Streamline to smooth your hand wobble so the overall curl direction stays clean.
Then open Taper. Curls look best when they start and end with a point, since a blunt cutoff at either end reads as a cut-out sticker. Apply taper at both ends, with pressure taper enabled if you work with an Apple Pencil.
Step 5: Add grain, dynamics, and rendering
Grain is optional but useful. A soft, fine grain gives the strokes a bit of paint-like irregularity, which helps if your final style is painterly. For clean cel or vector-style hair, skip grain entirely.
Under Apple Pencil and Dynamics:
- Link size to pressure so you can thin out strands near the tips.
- Link opacity to pressure lightly so that overlapping passes build up density.
- Use speed to reduce size slightly on fast strokes, which mimics a quick flick for flyaways.
Under Rendering, pick a flow model that suits your style. Light glazing builds depth well for hair that's layered in dark-to-light passes, while a more intense blending model suits flat shapes.
Step 6: Test, adjust, and save
Paint a few quick tests: a slow tight curl, a fast loose swoosh, and a crossing stroke over an existing one. Look for these problems:
- Visible repetition: increase rotation jitter or randomization.
- Looks like chain links: spacing is too tight, or the shape is too symmetrical.
- Strands look like confetti: reduce scatter.
- Blunt ends: raise taper values.
- Too heavy: lower the brush's max size or reduce count.
Under Properties, set a sensible maximum and minimum size so the brush doesn't blow up when you resize it. Finally, open About this brush, give it a descriptive name such as "Ringlet Tight" or "Loose Spiral," and save. Duplicate it and make variations rather than overwriting your first version. A tight coil brush, a loose wave brush, and a flyaway brush cover most character work.
Painting technique that makes the brush work
A custom brush won't fix weak hair structure. A reliable workflow:
- Block in the silhouette with a flat, hard brush on its own layer. Define the overall mass first, since curly hair is read as a shape before it's read as strands.
- Add mid-tone clumps with your curl brush, following the direction the hair would hang or spring.
- Paint shadows underneath the clumps on a separate layer, clipped to the base.
- Add highlights on the upper curve of each clump, not along the stroke direction.
- Finish with flyaways using a thin, fast-stroke variant.
Keep each pass on its own layer. That makes later edits painless and gives you separated elements to export.
Free brush sets: use them, but check the license
Plenty of free curl, coil, wave, and braid brush sets exist for Procreate, and they're a good way to study how other artists configure shape and spacing. Open one in Brush Studio and look at its settings, which is faster than reading tutorials. Check the license before using any of them in client work, though, because some free sets are limited to personal, non-commercial use and sell a separate commercial version. For professional deliverables, a brush you built yourself, or one with a clear commercial license, avoids that problem.
From Procreate hair to motion work
For motion designers and animators, a hair brush is rarely the end product. A few practical handoff tips:
- Export layered files. Save as PSD so hair, shadow, and highlight layers arrive in After Effects as separate, animatable elements.
- Paint on transparent backgrounds and keep hair on dedicated layers so you can apply the Puppet tool, wiggle expressions, or displacement in After Effects.
- Work at the final resolution. Painted strands soften badly when scaled up, so size your canvas for your delivery frame, or larger.
- Paint key poses if you plan to animate: a rest pose, a swing-left pose, and a swing-right pose give you drawn keyframes to work from.
Using painted hair as a reference for AI-assisted motion
If you want hand-painted curly hair to move without redrawing every frame, a keyframe-driven AI video tool may help. Some tools let you feed your Procreate frames in as keyframes, so the generation moves between your own painted poses rather than inventing the look from a text prompt. Capabilities, output resolution, and export formats vary by tool, so check what each one supports and how its results hand off to an After Effects or Nuke comp for color, grain, and final compositing. Treat it as a way to extend your painted frames into motion, not a replacement for your drawing: the hair design and its curl structure still come from your brush work.
Quick troubleshooting checklist
- Brush won't rotate with the stroke: check that the Shape rotation is set to follow the stroke, not fixed.
- Curls look pixelated: your shape source is too small. Redraw it larger in the editor.
- Spacing feels inconsistent when resizing: spacing scales with brush size, so retest at the sizes you'll actually use.
- Strokes look flat on a dark background: switch the blend or rendering mode, or paint on a separate layer set to a different blend mode.
Final thoughts
Building a curly hair brush comes down to a good coil-shaped stamp, controlled randomness, and spacing that keeps each loop readable. Spend your time on the shape and stroke settings, then save a small family of variations: tight, loose, and flyaway. Once you have those, hair stops being the slowest part of a character illustration, and the layered files carry cleanly into whichever motion pipeline you use next.