How to Make Crayon Brush Procreate
StyleFrame Team8 min read
To make a crayon brush in Procreate, duplicate a dry-media brush, then open Brush Studio and give it a rough, grainy stamp shape and a paper-like texture that stays fixed under the stroke. Set the grain to Textured movement, add pressure-sensitive opacity and a little shape jitter, and turn off Wet Mix. The grain does most of the work. A wax crayon is mostly texture, with paper tooth showing through uneven pressure.
What Makes a Brush Read as Crayon
Before you touch any sliders, it helps to know the four properties that separate crayon from pencil, chalk, or charcoal:
- Waxy, semi-opaque coverage. Crayon doesn't blend like paint. It deposits pigment on the high points of the paper and skips the valleys.
- Paper grain that stays put. The texture belongs to the surface, not the stroke. Overlapping strokes should fill in the same pits, building density without creating a new pattern.
- Pressure-driven density. Light pressure leaves a speckled, broken line. Heavy pressure packs the grain and approaches solid color.
- A slightly ragged edge. Real crayon tips wear down, so the outline of a stroke is never clean.
Procreate's stock brushes only approximate this. The Artist Crayon in the Sketching set leans toward Conté-style pastel on toothy paper. For a classic wax look on copy-paper-like texture, some users start from a dry brush in the Calligraphy set, such as Chalk or Shale, and modify it. Either is a good base, and building from one is faster than starting empty.
Method 1: Modify an Existing Brush (10 Minutes)
- Open the Brush Library and swipe left on a base brush like Shale or Chalk. Tap Duplicate.
- Tap the duplicate to open Brush Studio.
- Rename it in the About this brush tab so it doesn't get lost later.
- Work through the tabs below, adjusting a single setting at a time and testing after each change on a scratch canvas.
This approach keeps the base brush's pressure curve, which is often already well tuned, and lets you focus on the look.
Method 2: Build From Scratch
Tap the + in the Brush Library to open a blank brush. You'll need a shape and a grain, either of which you can make yourself.
Create the Grain Texture
The grain is the most important asset. You have three options:
- Scan or photograph real paper. Shoot a sheet of copy paper at a raking angle under a window so the tooth casts small shadows. Desaturate it.
- Scribble real crayon. Fill a page with firm crayon, scan it, and convert to black and white. This captures authentic skipping and wax buildup.
- Use a procedural source. If you already generate noise in After Effects (Fractal Noise), Blender, or Cinema 4D, render a square, tileable grayscale image and send it to your iPad. That's a good way to reuse a texture across your pipeline.
Whichever you choose, prepare the image the same way:
- Convert to grayscale.
- Increase contrast until you have clear separation between high and low points, with black and white both present. Muddy midtones give you a soft, smoky grain rather than a waxy one.
- Make it seamless. Visible tile edges will show up as repeating lines in long strokes.
- Keep it square, and large enough (around 1024 to 2048 px) that it doesn't blur when scaled.
In Brush Studio, open the Grain tab, tap Edit under Grain Source, then Import to bring in your image from Photos or Files. Procreate treats dark and light areas as where pigment is deposited or withheld. Use the invert control in the grain editor if your texture behaves the opposite way from what you expected.
Create the Shape
The shape is the tip of the crayon. Skip a perfect circle. Instead:
- Make a square canvas with a white background and paint a slightly irregular blob with black crayon or a rough brush.
- Break up the edges with a few notches or flecks. A tip that's too clean produces plasticky strokes.
- Import it via Shape → Edit → Import.
You don't need much detail here, because the grain will define most of the visible texture.
Brush Studio Settings That Matter
These are starting points, not fixed values. Procreate canvas resolution and your Pencil's pressure curve will shift what looks right.
Stroke Path
- Spacing: Low, around 3–8%, so the stamp builds a continuous line rather than visible dots.
- Jitter: A touch, so the stamp doesn't repeat identically.
- Streamline and Stabilization: Keep these low. Crayon drawing is loose and wobbly, and smoothing makes it look digital.
Shape
- Scatter: Minimal.
- Rotation: Set to random or follow-stroke, with some Randomized rotation so the ragged edge doesn't repeat.
- Azimuth: Turn on for tilt-based shape changes if you plan to shade with the side of the crayon.
Grain
- Movement: Textured. This is the single most important choice. Textured keeps the grain fixed to the canvas like paper tooth. Moving makes the grain travel with the stamp, which looks like a stamped pattern and is a common reason homemade crayon brushes feel off.
- Scale: Adjust until the tooth resembles the paper you want. Try matching the scale to your canvas DPI.
- Depth: Higher depth means the grain cuts deeper into the stroke, giving more broken coverage.
- Blend mode: Multiply or Normal gives a natural result. Test Darken for denser layering.
Rendering
- Choose a Light Glaze or Uniform Glaze for a flat, matte look.
- Turn Wet Mix controls (Dilution, Charge, Attack, Pull) down to zero. Wax doesn't smear and blend.
Apple Pencil Pressure and Dynamics
- Map pressure to Opacity so light touches leave faint, speckled marks.
- Add a little pressure-to-size response, but keep it subtle. Crayon width changes less than pencil.
- In Properties, set a maximum size that suits your canvas and a minimum size you can still control.
Test Like You Mean It
Draw the same set of marks every time you tweak:
- A light hatch, a heavy hatch, and a slow, wobbly line.
- A solid fill by scribbling back and forth.
- An overlapping cross-hatch of two colors.
- A stroke at a tilt, using the side of the Pencil.
Check each against a real crayon on real paper if you have one. If a flat scribble shows zero white speckles, your grain depth is too low. If light strokes disappear, the opacity curve is too steep. If overlaps look patterned, switch grain movement to Textured.
Two additional tricks help:
- Use a paper layer. Texture can be baked into the canvas by placing an off-white paper image beneath your drawing and setting your art layer to Multiply. Crayon on pure white looks harsher than on slightly warm paper.
- Add a texture pass. A duplicate of your artwork, run through a subtle grain overlay, can push the effect further without affecting the brush itself.
Sharing and Backing Up the Brush
Swipe left on the brush in the library and choose Share to export a .brush file. Keep a copy in cloud storage. If you build a family of crayons (fine tip, broad side, worn stub), put them in a custom set so they're easy to reach mid-project.
Bringing Procreate Crayon Art into a Motion Pipeline
Procreate gives you a convincing still. For motion designers, the real question is what happens next. A few workable routes:
- Frame-by-frame animation. Procreate's Animation Assist can produce hand-drawn crayon animation. Export as PNG sequences or video and bring them into After Effects for compositing, retiming, and color work. Because the grain is tied to the canvas, you may see the texture "boil" less than you'd expect. If you want a boiling effect, vary the grain offset across frames, or animate a displacement in post.
- Layered assets. Export transparent PNGs of individual elements, such as a crayon sun, a scribbled cloud, or a hand-lettered title, and animate them in After Effects with puppet pins, shape layers, or parenting.
- Texture plates. Draw a handful of crayon fills and edges to use as track mattes, luma mattes, or displacement sources in AE or Nuke.
Common Problems and Fixes
- Strokes look like a repeating stamp: Switch grain movement to Textured and increase shape randomization.
- Texture is too uniform: Increase contrast in the grain image, or raise depth.
- Coverage is too transparent: Raise the opacity ceiling, reduce grain depth, or use a lower-contrast grain.
- Lines look too clean: Roughen your shape source, reduce stabilization, add jitter.
- Colors smear: Wet Mix is still active. Set all four values to zero.
- Grain blurs on export: Your grain source is too small. Re-import at a higher resolution.
Quick Checklist
- Duplicate Shale, Chalk, or Artist Crayon, or start fresh.
- Make a high-contrast, seamless paper or wax grain and import it.
- Make a rough, irregular tip shape.
- Set grain movement to Textured.
- Low spacing, low stabilization, a little jitter.
- Pressure controls opacity, with Wet Mix off.
- Test with light, heavy, overlapped, and tilted strokes.
- Export the brush, then export your art as PNG sequences for After Effects or Nuke.
A good crayon brush takes a few rounds of tuning, but once the grain and pressure response feel right, the same asset serves illustration, animation, and texture work across the rest of your pipeline.