How to Make Cool Procreate Brushes
StyleFrame Team8 min read
The fastest way to make cool Procreate brushes is to duplicate an existing brush, replace its shape and grain with your own scanned or painted textures, then tune the stroke path and dynamics until it responds to your pen the way you want. Shape is the stamp that gets pressed down, and grain is the texture that shows through it, so most of the character comes from those two source images. Make them square, large, and high-contrast, and the rest is adjusting sliders and testing strokes.
How Procreate Brushes Work
Every brush in Procreate's Brush Studio is built from two images:
- Shape: the stamp laid down repeatedly along your stroke. A round dot gives a smooth line, a blotchy splatter gives a rough edge, and a leaf gives a scatter brush.
- Grain: the texture that shows through the shape, like paper tooth, canvas weave, or sponge pores.
Change either one and the brush feels different. Because the combination multiplies, a handful of source images can produce dozens of distinct tools. Everything else, such as spacing, jitter, pressure response, and taper, controls how those two images get applied.
Step 1: Set Up a Safe Workspace
Before you touch any settings:
- Open the brush library and create a new brush set by tapping the plus at the top of the set list. Name it something you'll recognize, like "Studio Textures." This keeps your experiments out of Procreate's built-in packs.
- Either tap the plus inside your set to start from scratch, or swipe left on an existing brush and choose Duplicate, then drag the copy into your set.
Duplicating is the better habit while you're learning. You start with a brush that already behaves well, and if you wreck the settings, the original is untouched. You can rename the copy under About This Brush, where you can also add your name or signature.
Step 2: Prepare Source Images That Actually Work
Most "my brush is blank" and "my brush looks blurry" problems come from the source file, not the settings. A few rules save a lot of frustration:
- Work on a square canvas. Non-square sources get distorted.
- Work big. Something like 10 × 10 inches at 300 dpi keeps the brush crisp when you scale it up.
- Use pure black and white for opaque results. The brush engine reads white as solid and black as transparent. Mid-grays produce semi-transparent marks, which is useful when you want soft, layered texture and a problem when you don't.
- Know your file types. A PNG with a transparent background and a black design reads as an entirely empty square. Either draw the design in white, put black art on a solid white background, or save as a JPG.
- Invert when needed. Tap the imported image with two fingers to flip its values before you confirm.
If you want to paint a shape directly in Procreate, many brush makers work on a dark canvas with light marks, since that mirrors how the engine reads the image. Keep your mark-making inside the canvas, with margin around the edges, so stray satellite marks don't clip or create unwanted artifacts.
Step 3: Build a Distinctive Shape
Open your duplicate or new brush, tap Shape, then Edit. From there you can import from:
- The Source Library, which has over 150 built-in shapes. Good for quick experiments, but everyone has them.
- Photos or the clipboard, where your own material lives.
- A canvas you just painted, copied and pasted straight in.
The shapes that make a brush feel unique are rarely perfect. Try:
- Irregular blobs drawn with a dry brush
- Scanned ink splatters or sponge stamps
- Dots in clusters that thin out on one side, so the stroke has natural variation
- Torn paper edges or charcoal smudges
- Leaves, grass blades, or other organic forms for scatter brushes
Once the shape is in, look at the settings that control how stamps land. Randomizing their placement and rotation breaks up the mechanical repetition that makes digital brushes look fake. If your design needs to stay upright regardless of stroke direction, turn on Orient to iPad Screen in the General settings.
Step 4: Add a Grain With Texture
Grain is where a brush starts to look like a real medium. Tap Grain, then Edit, and import your own texture. Good sources include:
- Watercolor washes painted on cold-press paper and scanned
- Photos of sand, bark, soil, concrete, or paper
- Crumpled-paper or dry-ink scans
- Halftone or noise patterns you generated elsewhere
Crop your texture to a 1:1 ratio before importing. Then enable Auto Repeat so the image tiles and doesn't show its edges mid-stroke.
Adjust the grain settings, and test at different brush sizes. A grain that looks great at 40 pixels can turn muddy at 400.
Step 5: Tune the Stroke Path
The Stroke Path settings decide whether your brush draws a smooth line or a trail of individual stamps:
- Spacing: low values blend stamps into a continuous line. Raising it reveals each stamp, which is how you get dotted, stippled, or stamp-style brushes.
- Jitter: scatters stamps off the path. Small amounts add organic wobble, large amounts create spray or splatter.
- Falloff: makes the stroke fade out as if you ran out of paint.
- StreamLine: smooths wobble for precise linework. Inking brushes usually want a healthy amount, while expressive texture brushes often want very little.
Also check Size Limits under Properties if you need a brush that goes finer or broader than the default slider allows.
Step 6: Make It React to Your Hand
A brush becomes cool when it responds to pressure and tilt. Open the Apple Pencil settings and the dynamics panels, then experiment:
- Link size and opacity to pressure so light strokes are thin and faint while hard strokes are bold.
- Add taper at the start and end of strokes for inked, calligraphic tails.
- For watercolor-style brushes, adjust dilution, flow, and bleed for soft edges and pooling.
- Under Color Dynamics, raise the hue slider on color pressure and the brush will shift color as you press harder. It's a fun way to discover effects you wouldn't plan.
Change one slider at a time. If you adjust six things at once and the brush looks great or terrible, you won't know why.
Step 7: Test, Break, and Refine
Create a blank canvas and paint test strokes in different directions, speeds, and sizes. Check:
- Slow versus fast strokes
- Light versus heavy pressure
- Small versus large size
- Overlapping strokes, and whether they build up or flatten out
- Light versus dark colors on light and dark backgrounds
When it feels right, tap Done. You can reopen Brush Studio any time to keep tweaking. Brush-making is addictive, so don't be surprised if one brush turns into a whole set. When a set is ready, swipe left on a brush and choose Share to send it to someone else.
Quick Recipes for Cool Brushes
Gritty ink brush: Scan a dry-brush ink smear for the shape, use a fine paper texture for grain, add moderate StreamLine and pressure-linked size.
Sponge stamp: Use a scanned sponge print as the shape, raise spacing so individual stamps show, add rotation randomness and slight jitter.
Chalk or charcoal: Import a high-contrast charcoal scan as the grain and keep spacing low.
Scatter foliage: Draw leaf or grass shapes, use high scatter and size jitter, and randomize rotation for natural variation.
Watercolor wash: Use a soft blotchy shape with a scanned watercolor-paper grain, then adjust dilution, bleed, and flow for wet edges.
Troubleshooting Common Problems
- Brush paints nothing: Check for a transparent PNG with black artwork. Switch to white art or a JPG, or invert the image.
- Brush is blurry: Your source was too small. Rebuild at a higher resolution.
- Visible tile edges in the texture: Turn on Auto Repeat or make the texture seamless before importing.
- Stamps look like boxes: The source probably has a non-black background. Clean it to pure black and white.
- Brush looks too faint: Gray values in the source are making it semi-transparent. Push contrast toward pure black and white.
Taking Procreate Brushes Into a Motion Pipeline
For motion designers and animators, Procreate brushes are often the start of a look rather than the finish. Painted textures and hand-drawn frames can carry a style into video if you have a way to extend them.
This is where Styleframe fits. It's an AI video and motion tool built around artistic control and driven by your own references, so illustrations made with your custom brushes can serve as a starting point for motion work. Your Procreate brushes define the look, and your existing pipeline handles the final assembly.
Keep Your Brush Library Organized
Name brushes by function, such as "Ink – Dry Edge" or "Texture – Concrete Fine," and group them in sets by project or medium. Keep your original source images in a folder alongside the exported brush files. When you want to remake a brush at a higher resolution, you'll be glad the raw scans still exist.
The best brushes usually come from real material: scanned paint, photographed surfaces, and your own handwriting. Start with one shape, one grain, and a few stroke settings, and build from there.