How to Make Comic Boxes in Procreate
StyleFrame Team8 min read
The fastest way to make comic boxes in Procreate is to create a canvas at your page size, use the Rectangle Selection tool to mark each panel, and fill the selection with a border color on its own layer. Then shrink the selection and clear the inside to leave a clean frame. For angled panels, use the Freehand selection and tap out straight-edged points. Put each panel's artwork in a clipping mask above its box so the drawing never spills into the gutter.
Set up the canvas before you draw any panels
Panel work goes wrong when the canvas is wrong, so decide on page size and resolution first.
- Tap Gallery > + > Custom canvas.
- Enter your final page size in inches or pixels and set DPI to 300 for print. A standard US comic page trims to about 6.625 × 10.25 in. With bleed, that is roughly 6.875 × 10.5 in, or about 2063 × 3150 px at 300 DPI.
- Choose your color profile in the same dialog. Use an RGB profile for screen delivery or motion work. Pick a CMYK profile only if the printer asks for it.
- Check the maximum layer count shown in the dialog. Higher resolutions reduce the layers your device allows, which matters if you plan one layer per panel.
If you're building pages for an animated or motion-comic project, think about the delivery format now. A vertical page is fine for a scrolling piece, but a 16:9 canvas makes each "box" easier to treat as a shot later. Set panel proportions to match the aspect ratio you'll finish in.
Method 1: Rectangle Selection for clean, exact boxes
This is the most reliable approach because every edge is perfectly straight and you control the size numerically.
- Create a new layer and name it "Panel 01 – Frame."
- Tap the Selection tool (the S-shaped icon) and choose Rectangle at the bottom.
- Drag out the outer boundary of your first panel.
- Tap Color Fill in the selection toolbar, or drag a color from the swatch into the selection, to fill it with your border color (usually black).
- With the selection still active, tap Transform and drag a corner while snapping is on. This lets you check the shape against the canvas edges.
- To cut the inside out, draw a second, smaller rectangle inside the first. Swipe down with three fingers and tap Cut to delete the interior. What remains is a border of consistent thickness.
Procreate has no "stroke selection" command, so the fill-then-clear step is how you build an outline from a selection. The gap between your inner and outer rectangles sets the border weight, so use the same inset on every panel.
Keep gutters consistent
Gutters are the white space between panels. A common rule is to keep the gutter at one fixed width, such as 40 px at 300 DPI, with slightly wider outer margins. To avoid eyeballing it:
- Turn on Canvas > Drawing Guide > Edit Drawing Guide and set a 2D grid size that matches your gutter unit.
- Enable Drawing Assist so your lines stay aligned with the grid.
- Place each panel edge on a grid line, and leave exactly one grid square for the gutter.
Method 2: Draw boxes with QuickShape
If you prefer a stroked outline over a filled-and-cleared border, QuickShape is faster.
- Choose a hard inking brush at your target border width.
- Draw a rough rectangle and hold your pen at the end of the stroke. Procreate snaps it into a shape.
- Tap Edit Shape to adjust corners so the box lines up with your grid.
- Repeat on the same layer, or give each panel its own layer for easier editing.
The tradeoff is that QuickShape boxes are stroke-based. They are easy to move with Transform, but you can't clip artwork to the interior as easily. Many artists use QuickShape for loose thumbnails and switch to the selection method for final pages.
Method 3: Angled and irregular panels
Action sequences often need diagonal cuts. Use the Freehand selection for these:
- Open the Selection tool and choose Freehand.
- Instead of dragging, tap each corner point in turn. Procreate connects taps with straight lines.
- Tap the first point to close the shape, then fill it on a new layer.
- Use Add and Remove to merge shapes or carve notches, such as a small inset panel overlapping a larger one.
For borderless or "bleeding" panels, skip the frame and use the filled selection only as a mask for your art.
Build each panel as a mask, not a drawing surface
The structure that saves the most time on revisions is a filled panel shape with art clipped to it.
- Fill your panel shape on a layer (any solid color). This is the panel base.
- Add a new layer above it and tap Clipping Mask. Anything drawn on this layer shows only inside the panel shape.
- Stack as many clipped layers as you need: flats, shading, line art, and effects.
- Group the base and clipped layers into one group per panel, such as "P01," "P02," and so on.
- Keep a separate unclipped frame layer on top for the black borders.
Now you can move a panel's shape, resize it, or change a gutter without erasing anything, because the art is bounded by the mask and not hand-trimmed. It also lets figures break out of a panel: put the character on an unclipped layer above the frame and let an arm or a weapon cross the border on purpose.
Add speech bubbles and lettering
Place lettering above everything, ideally in its own group:
- Use Ellipse Selection to make balloon bodies, then Add a freehand triangle for the tail and fill both in one pass.
- Repeat the fill-and-shrink trick to give balloons an outline.
- Add text with Actions > Add > Add Text. Keep type live until the final pass, because rasterizing it prevents typo fixes.
- Leave room inside panels for balloons when you thumbnail, so you aren't covering the art you spent hours on.
Save a reusable page template
Once your grid, margins, and a few panel layouts work, save them:
- Delete the artwork but keep the frame layers and guides.
- Duplicate the canvas in the Gallery and rename it, for example "Page Template – 6 Panel."
- Make a version for each common layout, such as splash, three-tier, and widescreen.
Duplicating a template gives you a page that already has correct bleed, gutters, and layer naming, so every page in a series matches.
Export for motion work
If the comic is headed for After Effects, Premiere Pro, or a compositing pipeline, export deliberately:
- PSD keeps your layers, so each panel's background, character, and effects arrive as separate elements for parallax in After Effects.
- PNG is best for flat pages or for individual panels you've isolated.
- Name layers before export. Procreate carries the names into the PSD, which makes importing a 20-layer page far less painful.
- Paint a little extra behind characters and foreground objects. When a layer moves in a camera push or parallax, you will otherwise see empty space where the art ends.
Procreate's own companion app, Procreate Dreams, can animate drawn frames directly. Many motion designers still prefer to finish in After Effects, where cameras, expressions, and color management already live.
Turning finished comic panels into motion
Once your boxes and art are in place, each panel can act as a shot. This is where an AI video tool with real artistic control can help, as long as it is driven by your art rather than replacing it. is one such tool you could explore for reference-driven work like this. Check its site for current features, export formats, and plugin support, and confirm that its output fits your compositing pipeline before you commit to it.
Common mistakes to avoid
- Working at screen resolution. Upscaling a 72 DPI page for print softens every line. Start at the final size.
- Eyeballing gutters. Small differences between panels read as sloppiness. Use the grid.
- Drawing directly on the frame layer. Art on the same layer as borders makes edits destructive. Use clipped layers.
- Forgetting bleed. Art that stops at the trim line risks white slivers after printing, and in motion work it leaves nothing to move.
- Merging too early. Keep panels, balloons, and text on separate layers until the page is locked.
Quick reference workflow
- Create a 300 DPI canvas with bleed.
- Set a 2D grid that matches your gutter width.
- Draw each panel with Rectangle Selection, or tap points with Freehand for angled shapes.
- Fill, then shrink and clear, to make borders.
- Clip artwork layers to each panel base.
- Add balloons and live text on top.
- Save the layout as a template.
- Export a layered PSD for compositing, with clear layer names and extra paint beyond the edges.
A tidy panel structure takes only a little extra setup, and it pays off whether the page ends up in print or on a timeline.