How to Make Collage in Procreate
StyleFrame Team8 min read
To make a collage in Procreate, import your source images as layers, cut out the pieces you want with the Selection tool, and use Duplicate (or Cut & Paste) to put each cutout on its own layer. Then arrange them with Transform, rough up the edges with an eraser brush if you want a torn-paper look, and add a soft offset shadow under each piece. Finish by matching color with Adjustments and blend modes, then export a layered PSD or flattened PNG. If you plan to animate the result, the PSD is the useful format because every cutout stays separate.
What You Need Before You Start
Procreate is a raster painting app, so collage here is built from pixels, not vector shapes. That shapes a few decisions up front.
- An iPad with Procreate and a stylus. A finger works for rough cuts, but an Apple Pencil gives cleaner selections.
- A folder of source images. Gather everything before you open the canvas. Hunting for assets mid-project breaks your flow, and a limited image set tends to look more cohesive.
- Rights-cleared material. Free-use libraries such as Unsplash, Pexels, and Pixabay are common sources. Check the license if the work is commercial.
- A large canvas. Every scale or rotate commits to pixels, so start bigger than your delivery size. If this is going into a video timeline, set the canvas to your composition resolution or higher.
Step 1: Set Up the Canvas and Import Your Images
Create a new canvas at your target size, larger if there is any chance of print. Then bring in your source material:
- Import your images into Procreate, for example from your camera roll or the Files app.
- Each imported image lands on its own layer. Name your layers early. A collage can quickly grow to many layers, and "Layer 27" helps nobody.
- Group related layers (backgrounds, subjects, textures, shadows) by swiping right on layers to multi-select them, then tapping Group.
You can also make your own "paper." Fill a layer with a flat color, then run a texture brush over it. Use Adjustments → Hue, Saturation, Brightness to shift that single sheet into a whole palette of colors. Duplicate the textured layer, change the hue on each copy, and you have a stack of consistent paper stock.
Step 2: Cut Out Your Elements
Cutting is the core of the technique, and Procreate gives you several ways to do it.
Freehand Selection
Select the source layer, open the Selection tool (the S icon), and choose Freehand. Draw around the shape you want and close the loop. Drawing by hand gives you a slightly imprecise, scissor-cut quality that suits a handmade collage.
With the selection active, swipe down with three fingers to open the copy-and-paste menu. Choose:
- Duplicate to put the cutout on its own new layer and leave the source intact, so you can reuse the same texture again.
- Cut & Paste to lift the piece out of the source and leave a hole behind, which is useful if you want the cut-out sheet to stay visible as part of the layout.
Other Selection Modes
- Automatic is good for isolating objects with clear tonal separation, like a flower on a plain backdrop.
- Rectangle and Ellipse suit clean geometric pieces such as photo frames or circular stickers.
- Add and Remove let you refine a selection without starting over. Switch to Remove to carve out stray areas.
If the selection mask is too distracting, you can change its visibility under the Actions menu in Prefs → Selection Mask Visibility.
Step 3: Arrange and Transform the Pieces
Once your cutouts are on their own layers, build the composition.
- Use the Transform tool (the arrow icon) to move, scale, and rotate each piece. Use alignment aids only when you need them. Otherwise leave them off for a looser look.
- Reorder layers so cutouts sit above their backgrounds. Drag layers up and down in the Layers panel.
- Establish hierarchy first: large background shapes, then midground elements, then small accents and focal details.
Watch out for resampling. Procreate rasterizes a layer each time you commit a transform, so repeated scaling and rotating softens the image. Plan your sizes, scale each piece once where possible, and keep a hidden duplicate of the original in case you need a clean copy later. This is the main reason experienced users reach for vector tools when a collage needs to be resized many times.
Step 4: Rough Up the Edges for a Torn-Paper Look
Clean freehand cuts read as scissor-cut paper. For torn edges, you need irregularity.
- Select the cutout layer.
- Pick the Eraser tool and choose a rough ink, dry brush, or sketch brush.
- Drag along the edges so the brush bites into the shape unevenly.
- For the pale fiber you see along real torn paper, turn on Alpha Lock on the layer (or add a clipping mask above it) and paint a lighter color along the edge with the same brush.
Finish this edge work before you create shadows, because the shadow depends on the final silhouette. Nobody will inspect your edges at 400% zoom, so aim for convincing, not forensic.
Step 5: Add Shadows That Make the Layers Feel Physical
Shadows are the biggest difference between a pile of stickers and a collage that feels like stacked paper. Here is a repeatable method:
- Duplicate the cutout layer.
- On the bottom copy, turn on Alpha Lock and fill the layer with black (or a deep warm brown, which often looks more natural). Then turn Alpha Lock off.
- Open Adjustments → Gaussian Blur, choose Layer, and drag until the edge softens. A small value, around 5 percent, usually suits thin paper.
- Lower the layer opacity to about 30 percent. You can also set the blend mode to Linear Burn for a richer, more integrated shadow.
- Use Transform to nudge the shadow down and to one side. Keep the offset direction identical across the whole collage so the light source stays consistent.
For pieces that sit higher above the page, use a larger offset and a bigger blur. For pieces lying nearly flat, keep both tight. Varying shadow distance is a cheap way to imply depth.
Step 6: Unify Color and Texture
Collage elements pulled from different photos rarely match straight out of the folder. Use these tools to bring them together:
- Hue, Saturation, Brightness to pull mismatched colors toward your palette.
- Blend modes on texture layers placed above everything. A scanned paper grain or film dust layer at low opacity ties the whole piece together.
- Clipping masks to apply a texture or color only to the shape beneath it, without damaging the original pixels.
Papercut Variation Using Clipping Masks
For a flat, layered papercut look, make one textured color sheet and duplicate it for each shape. Shift the hue on each copy. Put an empty layer beneath each, draw a solid shape on it, and clip the textured sheet to that shape. Each shape then takes on the color and texture above it. Add the shadow routine from Step 5 to each shape, and you have a clean papercut illustration with fully editable pieces.
Step 7: Organize and Export
Before exporting, tidy up:
- Group and name layers logically.
- Hide any scratch layers.
- Check that each shadow sits directly below its subject.
Then choose the format from Actions → Share:
- PSD keeps every layer, which matters if you plan to continue in Photoshop or bring the piece into a motion pipeline.
- PNG gives a flat image with transparency support.
- JPEG is suitable for quick previews.
- Procreate keeps the native file.
Taking a Procreate Collage Into Motion
For motion designers, a collage often isn't the final deliverable. It's a styleframe, a texture source, or a set of animatable assets. A few practical tips:
- Export a layered PSD and import it into After Effects as a composition with layers retained. Each cutout and shadow can then be animated separately for parallax, stop-motion-style jitter, or camera moves.
- Build on a larger canvas than your composition so you have room to push in and pan without revealing blurry pixels.
- Keep shadows on their own layers. That lets you animate them separately, for example shifting offset and blur to suggest paper lifting.
- Export hidden-edge versions if pieces will move. Anything cut off by another layer will show a gap once the top layer shifts, so paint the covered areas where needed.
Where Styleframe Fits
If you want to push a collage beyond manual keyframing, is an AI video and motion tool you can explore for carrying your collage frames into motion while keeping artist-directed control.
Common Mistakes to Avoid
- Scaling the same layer repeatedly. Each transform resamples pixels. Scale once, or work from a duplicate of the original.
- Inconsistent shadow direction. If shadows fall different ways, the layers stop looking like they share a light source.
- Too many source styles. Mixing too many photographic looks makes color matching harder. Restrict yourself to a small set of images.
- Perfectly clean cuts everywhere. Slight irregularity reads as handmade. Mix clean, torn, and rough edges deliberately.
- Skipping layer names. In a file with many layers, naming saves time, especially when handing the PSD to another artist or opening it in After Effects.
- Forgetting the license. Confirm usage rights for every source image before client delivery.
Quick Workflow Recap
- Gather and organize your source images.
- Create a large canvas and import assets.
- Cut shapes with Freehand selection, then Duplicate or Cut & Paste.
- Arrange and transform with minimal resampling.
- Rough up edges with an eraser brush.
- Build shadows using Alpha Lock, Gaussian Blur, and reduced opacity.
- Match color with Adjustments, blend modes, and clipping masks.
- Export a layered PSD for editing or animation.
Procreate is not a dedicated collage tool, but once you have this cut, shadow, and color routine, you can build convincing paper-style collages quickly. Keep the layers separate and the file organized, and the same artwork can move straight into your motion pipeline.