How to Make Clean Lineart in Procreate
StyleFrame Team8 min read
To make clean lineart in Procreate, work from a finished sketch dropped to low opacity on a locked layer, then ink on a new layer with a brush that has StreamLine turned up. Draw long, confident strokes instead of tracing short segments, and use Quick Shape and Transform to correct geometry. Build the canvas large enough to survive scaling, keep each element on its own layer, and export with transparency so the lines drop straight into After Effects or another compositor.
Set Up the Canvas for the Final Destination
Clean lines start with the canvas. A low-resolution document makes edges look stepped the moment you scale up, and that gets worse in a motion pipeline where a frame may be pushed in, repositioned, or rendered at a higher resolution than you drew it.
- Size it to the comp, then go bigger. If the final is 1920×1080 or 3840×2160, make the Procreate canvas at least that size. If you plan camera moves or punch-ins, draw larger than the comp.
- Use a transparent background. Hide or delete the default white background layer when you export so the lines arrive with alpha.
- Name layers early. "Sketch," "Line_Head," "Line_Body," and "Line_Props" will save you time in a compositor.
Finish the Sketch Before You Ink
Most messy lineart is a symptom of a vague sketch. If the underdrawing has gray areas or unresolved overlaps, you end up solving drawing problems while inking, and your hand hesitates.
Resolve construction, proportions, and overlaps in the sketch stage. Keep the sketch energetic, because that gesture carries into the final line, but make it clear about where each contour begins and ends.
Lower the sketch so you can't trace it
Drop the sketch layer opacity very low, to the point where it's a faint suggestion. Changing its color (a pale blue or red works) also helps separate it from your ink. Then lock the layer so you don't accidentally draw on it.
The point is to interpret the sketch rather than copy it. When the underdrawing is faint, you ink the intended line, not every wobble that happened to be in the pencil pass. Use the reference window or zoom out regularly so you aren't lost in details.
Choose the Right Brush and Smoothing Settings
Brush choice matters less than how it's configured. Procreate's built-in Technical Pen and Dry Ink are perfectly good starting points. What you tune is how the stroke behaves.
StreamLine and Stabilization
Both live in Brush Studio under the Stabilization tab.
- StreamLine corrects wobble as you draw by smoothing the path of the stroke. Raise it for long contours, curves, and inking.
- Stabilization smooths and straightens the stroke more aggressively. It gives a polished result, but too much can make it harder to draw accurate curves and sharp corners.
- Global stabilization (Actions > Prefs > Pressure & Smoothing) overrides every brush. If your pencil suddenly feels laggy on a brush that was fine yesterday, check this setting first.
Duplicate a brush before you modify it so you keep the original. Make two or three variants, such as a heavily smoothed contour pen and a looser detail pen, and switch between them instead of constantly adjusting sliders.
When to turn smoothing down
Heavy smoothing flattens character. Reduce it for:
- Sharp corners and hard-edged mechanical details
- Hair, fur, hatching, and other intentionally textured marks
- Small details where precision matters more than flow
Pressure and taper
Set pressure response so a light touch gives a thin line and a firmer press adds weight. Tapered ends on strokes make lineart look deliberate, and a consistent pressure curve makes your line weight predictable. For motion work where consistency across many drawings matters, a brush with limited pressure variation is often easier to keep uniform than a highly expressive one.
Draw Strokes, Not Traces
Technique is the bigger factor in clean lines.
- Use long, single strokes. Short, stitched-together segments create bumps at every join. Plan each contour as one continuous gesture where you can.
- Rotate the canvas. Turn the canvas so the curve you're drawing is in your natural arc, usually pulling toward your body.
- Draw from the shoulder or elbow. For big curves, wrist-only movement tends to produce shaky arcs.
- Commit to the stroke. Slow, hesitant lines wobble. A quick, confident stroke with StreamLine behind it comes out cleaner.
- Reduce friction. An artist's glove and palm rejection help your hand glide, and they prevent stray marks.
- Lift and redo. Undo and redraw. Redrawing a bad stroke is almost always faster than repairing it.
Let overlaps and joins be intentional
Where two lines meet, decide whether they cross slightly, stop short, or connect cleanly. Overshooting a little and cleaning up with the eraser usually looks sharper than trying to land a stroke exactly on the endpoint. If you plan to color with fills, make sure shapes are closed so you don't have to chase gaps later.
Fix Geometry Without Redrawing Everything
Procreate has several tools to correct lines after you draw them.
- Quick Shape: Draw a line, circle, or polygon and hold at the end of the stroke. Procreate snaps it to a clean shape. You can then adjust it, and for a circle or ellipse you can tap with another finger to constrain it to perfect proportions. Convert straight lines to arcs by dragging the edit handles.
- Selection and Transform: Lasso a section of a stroke, then use Transform to nudge, scale, or warp it. This is a good way to fix a head that's slightly too wide without redrawing the contour.
- Eraser with a hard brush: Use the same brush type for erasing as for inking so the edges of cut lines match the rest of the drawing.
- Separate correction layer: Put fixes on a new layer when you're not sure. You can merge down once you're happy.
Build Line Weight With Intent
Even weight everywhere reads as flat. A simple hierarchy makes drawings look more professional:
- Heavier lines for outer silhouettes and areas in shadow
- Medium lines for major interior forms
- Light lines for surface detail, folds, and texture
Pick your weights up front and stick to them. If you're producing a series of drawings for an animation, write down the brush size and smoothing values you used so every frame matches.
Prepare Lineart for Motion Work
Clean lines on a still image are one thing. Lines that hold up in After Effects, Nuke, or a Cinema 4D or Blender texture workflow have a few extra requirements.
Separate by what moves
Put elements that will move independently on separate layers: head, arms, props, background. Name them clearly and keep a consistent structure between files. If you're building a rig in After Effects, overlap shapes slightly where joints will rotate, so you don't see gaps.
Keep line weight consistent across drawings
If you're drawing multiple frames or poses, a changing brush size creates visible jumps. Lock your brush size, keep the same canvas dimensions across files, and avoid scaling individual drawings after the fact.
Export correctly
- Export a PSD if you want layers preserved in After Effects or Photoshop.
- Export PNG with a transparent background for flattened elements.
- Check edges against both light and dark backgrounds, since a thin halo of the wrong color can appear when compositing.
- Lineart drawn at a fixed resolution can look stepped when scaled up. Don't upscale a finished drawing beyond its native resolution unless you're using a dedicated upscaler.
Extending Lineart Into Motion With Styleframe
Once the lineart is clean, the next question for motion artists is how to get it moving or into a different look without losing the drawing. is one tool you could explore for that, alongside your existing After Effects or Nuke workflow.
The quality of what goes in still determines what comes out. Clean contours, closed shapes, and consistent line weight make for a stronger keyframe or style input.
Common Mistakes to Avoid
- Inking over a sketch at full opacity, which leads to tracing every wobble
- Leaving global stabilization on and wondering why every brush feels delayed
- Using too much smoothing on lines that need sharp corners
- Working on a small canvas and scaling up later
- Merging all layers too early, which makes later animation or edits much harder
- Changing brush size mid-project, which causes inconsistent line weight in a series
Quick Workflow Checklist
- Create a canvas at or above final resolution with a transparent background.
- Finish a clear sketch, then lower its opacity, tint it, and lock it.
- Choose or duplicate an inking brush with StreamLine raised.
- Ink in long strokes on a new layer, rotating the canvas as needed.
- Fix geometry with Quick Shape, Transform, and the eraser.
- Apply a deliberate line weight hierarchy.
- Separate elements into named layers.
- Export as PSD or transparent PNG, and test on light and dark backgrounds.
- Bring the art into After Effects, Nuke, or Styleframe for animation, restyling, and finishing.
Clean lineart in Procreate mostly comes down to preparation, a well-configured brush, and confident strokes. With those in place, your drawings will hold up when you carry them into motion work.