How to Make Circle Text in Procreate
StyleFrame Team8 min read
Procreate has no text-on-path feature, so circle text is built manually: draw a circle guide, add your text, then bend it with Warp (Advanced Mesh) or rotate each letter around the guide by hand. Warp is faster and works well for arcs, while manual placement gives the cleanest result for full circles and badge logos. For anything that needs to move, finish the circle text on a path in After Effects instead.
Why Procreate Can't Type on a Circle
Photoshop and Illustrator let you click a shape and type along its outline. Procreate's text tool only produces straight lines, and its curve tools (Warp, Liquify) deform pixels rather than follow a path. Every Procreate method is therefore a workaround, and each trades speed against precision.
The workflow has three parts: build a guide, get the text onto it, and clean up the result. The guide matters most, because every method depends on it.
Step 1: Build the Circle Guide
- Draw a circle. On a new layer, draw a rough circle with any monoline brush and keep your pencil or finger held at the end of the stroke. Procreate snaps it to a clean shape. Without lifting, you can adjust the size and proportions.
- Find the true center. Open Actions > Canvas > Drawing Guide > Edit Drawing Guide and raise the grid size to its maximum. The faint horizontal and vertical lines then mark the exact center of the canvas. Align your circle to that crosshair.
- Add a second circle for letter height. Duplicate the circle, shrink it, and center it. The gap between the two circles should roughly equal the cap height of your type. The outer circle becomes the ascender line and the inner circle becomes the baseline.
- Group and fade the guides. Put both circles in a group and lower its opacity so they don't distract. Hide or delete them before export.
If you're making a badge or logo, build the guide at the final canvas size. Resizing curved text later often shifts letter spacing visibly.
Step 2: Add the Text
Go to Actions > Add > Add Text, type your copy, and choose a font. Set tracking and size before you bend anything. Once you use Warp or Liquify, the text rasterizes and you can no longer edit the wording, so duplicate the text layer first and hide the original as a backup.
Two practical choices help later:
- Use all caps or evenly weighted fonts for tight circles. Descenders and lowercase ascenders make uneven curves look sloppier.
- Add extra letter spacing. Curving text along the outside of a circle spreads letters apart at the top, while curving it along the inside squeezes them together. Starting with slightly generous tracking for inner curves and slightly tight tracking for outer curves saves cleanup.
Method 1: Warp with Advanced Mesh (Fastest)
Warp suits arcs, such as the top half of a badge or a gentle smile curve.
- Select the text layer and tap Transform.
- Choose Warp in the bottom toolbar, then tap Advanced Mesh.
- Drag the mesh control points so the text bends along your guide circle. Move the center points up and the outer points down for an arch, and do the opposite for a bowl.
- Work symmetrically. Matching the left and right control points keeps the curve even.
- Compare the text against the baseline guide and make small corrections.
Limitations: Warp stretches letterforms rather than rotating them, so characters at the ends of the arc get skewed. Keep the arc under roughly half a circle. For full rings, the distortion becomes visible, especially on serif or script type. Use Warp when speed matters more than perfect letter shapes.
Method 2: Place Letters Individually (Most Control)
This is the most reliable way to get a full circle with undistorted letterforms. It takes longer, but each character keeps its original shape.
- Separate the letters. Either type each character as its own text layer, or rasterize the text and cut each letter onto its own layer with the Selection tool.
- Calculate spacing. Divide the arc by the number of letter gaps. For 12 letters across 180°, that's roughly 16° per step. Narrow letters like "I" need less, and wide letters like "M" need more. Treat the math as a starting point and adjust optically by eye.
- Rotate each letter. Using the Transform tool in Uniform mode, rotate the letter to its angle, then drag it onto the baseline guide.
- Check the baseline. The bottom of every letter should sit on the inner circle and the tops should reach the outer circle.
- Nudge kerning by eye. Squint at the finished ring. Gaps that look uneven are easier to spot when you blur your vision.
Optional pivot trick: Transform rotates around the center of a layer's content. If you place a tiny dot on the guide circle diametrically opposite a letter, on the same layer, the center of the combined bounds sits at the circle's center. Rotating then swings the letter around the ring in one move. Delete the dot afterward. It's fiddly, but it speeds up large badges.
Method 3: Liquify (Not Ideal for Circles)
Liquify's Push mode drags pixels like a finger smudge. It works for loose, organic curves, but it's difficult to control precisely, so it rarely produces a clean, concentric circle. Use it for small tweaks to a Warp result, such as easing a kink between two letters.
Text on the Bottom of the Circle
Text along the bottom of a badge should read left to right, with letter tops pointing toward the circle's center. If you simply curve text the same way as the top, it ends up upside down.
The cleanest approach:
- Build the bottom text as a smile-shaped curve using either Method 1 or Method 2, with letters standing on the outer circle instead of the inner one.
- Alternatively, create the top version, duplicate the layer, flip it vertically with Flip Vertical, then retype or adjust the letters so they read correctly. This only works well if the text is symmetrical or if you rebuild the letters afterward.
Because the circumference of the baseline differs between top and bottom, bottom text usually needs slightly different tracking to look balanced. Always judge both halves together.
Clean Up and Export
- Check optical alignment by hiding the guides and viewing the design at small size.
- Keep layers separate from the background if the badge will be reused.
- Export as a transparent PNG for a quick handoff, or as a layered PSD if your compositor needs individual elements.
- Keep a vector backup if you need infinite scaling. Procreate is raster, so a logo that will appear at billboard scale should be redrawn or traced in a vector tool.
If your motion project needs the badge to feel hand-lettered, draw the lettering directly on the circle with a brush instead of using a font. You can letter along the guide in your own handwriting, which sidesteps most distortion problems.
When the Circle Text Has to Move
Procreate is a strong place to design circle text, but it's a weak place to animate it. Rasterized, hand-placed letters can't be rotated as a unit without also moving the guide, and you can't change the text afterward.
Here's a sensible split of responsibilities:
- Look development in Procreate. Prototype the lettering, texture, and color, and use the circle as a visual reference.
- Live text in After Effects. For motion, rebuild the text as live type on a circular path in After Effects and animate it around the circle. Because the text stays live, you can change copy without re-warping anything.
- Textured elements from Procreate. Import your brush-drawn borders, stamps, or ornaments as PNG layers and composite them under the live text.
Where Styleframe Fits in This Workflow
Once you have finished circle lettering, such as a hand-drawn badge from Procreate, you may want to extend it into a stylized shot instead of a flat graphic. Styleframe is an AI video and motion tool built for artistic control, and it can take that Procreate artwork as a reference.
For accuracy, remember that readable small text can be unreliable in any generative tool, so keep your final typography live in your compositor and use Styleframe for the surrounding look and motion.
Common Mistakes to Avoid
- Skipping the center guide. Off-center circles produce lopsided rings that are hard to correct afterward.
- Warping too far. Heavy distortion ruins letterforms. Switch to manual placement for arcs beyond about 180°.
- Forgetting a backup layer. Rasterized text can't be edited. Duplicate before you transform.
- Using the same tracking everywhere. Inner and outer curves need different spacing.
- Leaving guides visible in the export. Hide or delete guide layers before sharing.
Quick Answers
Can Procreate put text on a path? No. It has no native text-on-path tool, so you rely on Warp, Liquify, or manual letter placement.
What's the fastest method? Warp with Advanced Mesh for arcs.
What's the cleanest method? Placing and rotating individual letters on a circle guide.
What if I need to animate it? Rebuild it as live text on a path in After Effects, using the Procreate version as design reference.